hama 00118108 TILT TV Wall Bracket Instruction Manual
- June 4, 2024
- Hama
Table of Contents
- hama 00118108 TILT TV Wall Bracket
- Required tools
- Installation kit
- Operating instruction
- Package Contents
- Safety Notes
- Intended use and specifications
- Installation requirements and installation
- Setting and maintenance
- Warranty Disclaimer
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama 00118108 TILT TV Wall Bracket
Required tools
Installation kit
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention
to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
Package Contents
- TV wall bracket
- TV support arms (2x)
- Installation kit (see contents, Fig. 1)
- These operating instructions
Note
Please check that the installation kit is complete before installing the
bracket and ensure that none of the parts are faulty or damaged.
Safety Notes
Warning
- Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
- It occasionally happens that the screws for attaching the terminal device to the wall bracket aretoo long.
- Please note that the supplied wall plugs arefor use with concrete brick and solid brick walls only.
- Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.
- If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from aspecialised dealer.
- If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from aspecialised dealer.
- Never apply force during mounting. This can damage your end device or wall bracket.
- If in doubt, have this product mounted by aqualified technician -donot attempt to mount it yourself!
- Do not mount the product above locations wherepersons might linger.
- Once you have mounted the product and the attached load, check that they are sufficiently secureand safe to use.
- Youshould repeat this check at regular intervals (at least every three months).
- When doing so, ensurethat the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.
- Make surethat the product is loaded symmetrically.
- Maintain the necessary safety clearance around the attached load (depending on the model)
- In the event of damage to the product, remove the attached load and stop using the product.
Intended use and specifications
- The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
- The bracket is only intended for use within buildings.
- Use the bracket only for the intended purpose.
Maximum load bearing capacity: | 40 kg |
---|---|
Screen size: | 81.0 – 191.0 cm (US: 32″ – 75″) |
Depth: | 2.8 cm |
Angle: | -10° (depends on the device) |
Wall mounting plate dimensions: | 62.0 x 9.6 cm |
Mounting holes: | according to the VESA standard until 600×400 |
Installation requirements and installation
Note
- Only mount the TV wall bracket with the help of a second person. Get the support and help you need.
- Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
- The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over,even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product, mount the wall bracket in a different location, buy a new TV,etc).
Warning
- This product is suitable for wall mounting only.
- Beforeinstalling the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water,gas or other lines are located at the installation location.
- Please note that the provided wall anchors are only approved for concrete and solid brick walls.
- Observe the other warnings and safety instructions.
- Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1ff.)
Note
- Given the multitude of terminal devices available on the market, we cannot describe all possible mounting options here.
- Please ensure that the bracket lays flat and evenly on the back of the television.
- Use the enclosed spacer to even out any unevenness on the back of the television.
- Ensurethat all screws have the proper length and can be mounted until they are hand-tight (see Fig. 2).
Setting and maintenance
Note
Only adjust the TV wall bracket with the help of a second person. Get the
support and help you need.
- To adjust the inclination, loosen the side mounting screws slightly,set the desired angle and retighten the screws securely.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.
- To secure, insert the carrying arms into the wall plate and tighten both screws.
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Terms of waranty
HAMA GmbH &CoKGgrants you an extended manufacturer’s warranty for this product
that covers the freedom from defects, usability, workmanship and durability of
the materials used for the specified period of 10 years. Compatibility of the
product with future standards for further developed hardware is also excluded.
At the discretion of Hama GmbH &CoKG, valid warranty claims in this period
will be resolved at no cost either by repair or replacement. The warranty
period begins on the date of purchase of this product and is valid throughout
the EU.
The warranty you are entitled to is in addition to your statutory rights and
does not affect them. The warranty does not cover damage caused
by improper use, normal wear and tear, exposure to chemicals, force majeure,
or modifications or repairs performed by yourself or third parties.
Furthermore, this warranty does not cover accessories that are not included
with the product as standard(promotional parts).
In the event of a warranty claim please write to us, enclosing proof of
purchase, at Hama GmbH &CoKG, Dresdner Str. 9, 86653 Monheim, Germany.You are
also free to contact us at www.hama.de or by telephone
on +49 (0)9091/502-0.
Service &Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>