Minka Lavery 1455-695 Oro District 1 Light Soft Brass Semi Flush Instruction Manual

Minka Lavery 1455-695 Oro District 1 Light Soft Brass Semi Flush

Product Specifications

• Model Number: 1455-XXX
• Date: 11/30/2023
• Maximum Wattage: 60 watts
• Bulb Type: Medium base, CFL, LED (not included)
• Wire Colors: Black, White, Bare Copper

Preparing for Installation:

1. Shut off power at the fuse box or circuit breaker.
2. Remove the old fixture including mounting hardware.

Assembling the Fixture

• Thread rod and canopy assembly onto all thread on top of fixture body.
• Thread screws into pre-drilled holes in circular strap. Attach circular strap to junction box with mounting screws.
• Make sure the circular strap is correctly positioned with the ground wire and convex points facing out.

Connecting the Wires

• Connect the electrical wires as shown in the diagram, ensuring proper grounding.
• Tuck wire connectors neatly into the junction box and raise the canopy to the ceiling.
• Completing the Installation:
• Secure the canopy with screws and knobs.
•  Install a medium base bulb up to 60 watts or equivalent CFL/LED, ensuring not to exceed the maximum wattage rating.
• Your installation is now complete. Restore power to the junction box and test the fixture.

Frequently Asked Questions (FAQ):
Q: What should I do if my junction box doesn’t have a ground wire?
A: In that case, connect the fixture’s ground wire directly to the Circular Strap using the green screw provided.

INSTALLATION INSTRUCTIONS

Item#1455-XXX (New. 11/30/2023)
READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENTI COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

PREPARING FOR INSTALLATION (Fig. 1)

1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including mounting hardware.

2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
   
   ASSEMBLING THE FIXTURE (Fig.1)

3. Thread rod and canopy assembly (D) onto all thread (F) on top of fixture body.

4.  Thread screws (A) into pre-drilled holes in circular strap (B). Spaced same distance apart as holes in canopy (D). The length of screws (A) may be adjusted if necessary.

5. Attach circular strap (B) to junction box (Not included) with mounting screws (C) (Size: #8-32N*L0.5”). The side of circular strap marked “GND” and two convex points must face out.
   CONNECTING THE WIRES (Fig. 2)

6. Connect the electrical wires as shown in Fig.2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the Circular Strap (B) using the green screw provided.

7. Tuck wire connectors neatly into junction box and raise canopy (D) to ceiling.
   COMPLETING THE INSTALLATION (Fig. 1)

8. Thread screws (A) into canopy (D), and secure with knobs (E).

9.  Install (1) one medium base bulb (G) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification. —DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

Your installation is now complete. Return power to the junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

LA-3747E

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>