Maxxima MRL-S61805 Slim Recessed LED Eyeball Gimbal Downlight Installation Guide

Maxxima MRL-S61805 Slim Recessed LED Eyeball Gimbal Downlight

Specifications:

• Model Numbers: MRL-S41256, MRL-S61805
• Website: www.maxximastyle.com
• Color Temperature Options: 2700K, 3000K, 3500K, 4000K, 5000K
• Hole Diameter:
  • MRL-S41565: 4″ (102 mm)
  • MRL-S61805: 6″ (150 mm)
• Warranty: 3 Year Limited Warranty

Product Usage Instructions

1. Turning Off Power:
   Ensure power is turned off by switching the circuit breaker or removing the fuse from the fuse panel.

2. Hole Preparation:
   If replacing a previous fixture, remove it and ensure the ceiling hole matches the required cutout diameter. For new LED installation, cut the correct hole diameter in the ceiling as specified.

3. Color Temperature Selection:
   Choose the desired color temperature based on the model:

   •   MRL-S41565: Inside junction box
   •   MRL-S61805: Side of junction box.

4. Junction Box Setup:
   Open the junction box, remove the appropriate knockout(s) on the side panel, and insert electrical supply wires through the knockout. Secure with a cable connector (not provided)

5. Wiring Connection:
   Using the provided wire nuts, connect the ground wire to the green wire terminal, black wire to hot wire terminal, white wire to neutral wire terminal as shown in the manual.

6. Fixture Installation:
   Place all wiring and connections into the junction box without pinching any wires. Insert the junction box through the mounting hole and push spring- loaded clips upwards to insert the fixture base. Release clips to pull the fixture flush with the ceiling.

7. Completion and Testing:
   After installation, restore power and check the operation of the light fixture to ensure proper functionality.

FAQ:

1. Q: What is the warranty coverage for Maxxima products?
   A: Maxxima offers a 3-year limited warranty against defects in material and workmanship. The warranty covers replacement of warrantied products if defects occur within the warranty period.

2. Q: How can I contact Maxxima for support or warranty claims?
   A: You can reach Maxxima via email at info@maxximastyle.com, phone at 866-MAXXIMA (629-9462), or visit their website at www.maxximastyle.com.

Round LED Slim Gimbal Downlight Installation Guide
MRL-S41256, MRL-S61805
www.maxximastyle.com

• WARNINGS

  • Risk of fire or electric shock.
  • If you are unfamiliar with electrical installations, consult a qualified electrician before proceeding.
  • Turn power off from electrical panel before installation or maintenance.
  • Do not make or alter any holes in the wiring enclosure or modify any electrical componentry.

• CAUTIONS

  • Intended for installation in accordance with local codes and the National Electric Code (NEC).

  • This fixture is designed for use with 120VAC, 50/60Hz only.

  • Suitable for damp locations.

  • Supply conductors must be rated for at least 90°C/194°F.

INSTRUCTIONS

1. Ensure that power has been turned off by switching the circuit breaker or by removing the fuse from the fuse panel.
2.  If replacing a previous fixture, remove that light and ensure the hole in the ceiling corresponds to the correct cutout diameter. If installing a new LED, cut correct hole diameter in the ceiling, as seen  in ****figure 1.

   ---

| Hole Diameter
---|---
MRL-S41565| 4” , 102 mm
MRL-S61805| 6” , 150 mm
3. Select the desired color temperature.

• MRL-S41565 – inside junction box
• MRL-S61805 – side of junction box.

4. Open the junction box and remove the appropriate knockout(s) on the side panel.
5. Insert the electrical supply wires through the knockout and secure with a cable connector (not provided).
6.  Using the provided wire nuts, connect the ground wire to the green wire terminal, black wire to hot wire terminal, white wire to neutral wire terminal, shown in figure 3.
7. Place all wiring and connections into the junction box, ensuring none are pinched.
8. Insert junction box through mounting hole and push spring loaded clips upwards and insert fixture base into the mounting hole. Release clips and fixture will be pulled flush with ceiling, seen in figure 4.
9. Installation is now complete. Restore power and check operation of the light fixture.

3 YEAR WARRANTY

Maxxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.

•   info@maxximastyle.com 
• 866-MAXXIMA (629-9462)
• www.maxximastyle.com
• 125 Cabot Court Hauppauge, NY 11788

References

• Factory Direct LED Recessed Lighting, Outdoor Wall Lights, Ceiling Fixtures and Electrical Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>