BASN Metalen HiFi In Ear Monitor Headphones User Manual

BASN Metalen HiFi In Ear Monitor Headphones User Manual

WARNING
For safe and correct use of earphones, read this manual before use. Keep the manual and safety information in a convenient place for future reference.

This BASN earpieces with MMCX connector are also compatible with our BASN Bsinger BC100, BASN Bsinger MC100, BASN Bsinger PRO, BASN Bsinger LUX, BASN Bsinger 2nd generation, BASN PRO SPE, BASN PRO SPM. You can use them for exchange.

Product Overview

1.  Adjustable memory ear-hook
2. Sleeve
3. MMCX connector
4. 3.5mm jack
5. Microphone
6. Play control

Coming With Two Cables

1. Upgrade silver-plated cable This cable ensures anti-interference and fidelity effect. I Ls= CO
   

2. Upgrade Mic Cable This cable with microphone and remote offers excellent call quality and convenient operation.
   

Before using the earphones, select your desired cable and attach the earpieces. Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.

1. Match the “L” and “R” markings(R = Right, L = Left). 2. Grasp the connector and the earpiece as close as possible to where they join.
   

2. Gently insert the connector in until they fit securely.

To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart with out twisting.

NOTE:

• Do not use pliers or other tools.
• Pull straight apart—do not twist. Cable is a snap fit, not threaded.
• Do not pull on the cable or put any pressure on the earphone nozzle.
• Do not plug the connector frequently.

Wearing the Earphones

1. Distinguish the right and left earpieces. Straighten the memory ear-hook and put each earpiece in the corresponding ear.

2. Adjust earpiece until it fits flush in your ear and sleeves seals in the ear canal.

3. Holding the earpiece in place, bend the memory ear-hook around your ear to achieve a conforming fit.

4. While pulling the cable gently with one hand, squeeze the memory wire behind your ear with the other hand until the fit is tight and secure.

The following are some suggested ways of wearing the earphones.

Wearing the cable over the ear and securing it behind the head can help keep the earphones in place during physical activity.

Tighten the cable and take up slack by raising the cable cinch.

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality. Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone deeper into the ear canal or try a different sleeve.

Changing Sleeves

Twist and pull to remove the sleeve from the nozzle.

Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by BASN (unless using custom molded sleeves)

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove.

Soft Flex Sleeves: In small. medium. and large sizes. Made from pliable rubber.

Memory Foam Sleeves More soft than rubber sleeves, coming with small, medium, large sizes

Cleaning the Earphone Nozzle

If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool.

Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter.

Using the Remote

Storing the Earphones

To extend the service life of earphones and wires, please put them in our carrying case.

Maintenance

• Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
• Keep the earphones and sleeves as clean and dry as possible.
• To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.
• Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.
• Do not expose earphones to extreme temperatures.
• Replace the sleeves if they do not fit properly.
• Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.

Note: The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab.

Follow our Instagram account
@basnaudioiem
@basnheadphone
@basn.zsy

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>