PELADN WI-4 Mini PC User Manual

October 30, 2023
PELADN

PELADN WI-4 Mini PC

PELADN-WI-4-Mini-PC-PRODUCT-IMG

Product Information

This product is a transmitter that complies with Part 15 of the FCC Rules. It is designed to transmit signals wirelessly and comes equipped with antennas that must be installed at least 20 cm away from all persons. The device must not be co-located for operating in conjunction with any other antenna or transmitter to avoid harmful interference.

Product Usage Instructions

To ensure proper usage of the transmitter, please follow these instructions:

  1. Reorient or relocate the receiving antenna to avoid interference.
  2. Increase the separation between the equipment and receiver to minimize interference.
  3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected to reduce interference.
  4. If you experience any issues, consult the dealer or an experienced radio/TV technician for help.

Please note that operation of this device is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

By following these instructions, you can ensure the safe and optimal usage of this transmitter.

Basic Operation

PELADN-WI-4-Mini-PC-FIG-1

Port Description

  1. D.conneet with headphone microphone
  2. connect with USB perf:ihel’CII device
  3. ON/OFF
  4. Connect with HOMI cable
  5. Connect with an ethernet cable
  6. connect with adapter
  7. connect with U5B peripheral device

Products and accessories

  1. Mini computer
  2. Power adapter
  3. User manual
  4. HDMI HD output cable
  5. Wall-Mounted bracket
  • Failure to use the included power adapter may violate regulatory compliance requirements and may expose the user to safety hazards.
  • Specifications are subject to the physical product.

Wall-Mounted bracelet

PELADN-WI-4-Mini-PC-FIG-2

Precautions For Use

In order to continue to improve the user experience, we may occasionally upvote the app and firmware.

  • Do not use harsh chemical solvents or cleaning products, We recommend using a soft cloth to wipe.
  • Do not throw products into the fire, avoid having fire accidents.
  • Do not attempt to open the housing or to repair it, if a failure occurs, please contact customer service.
  • Please note seepage while cleaning electronics, be careful of electric shock.
  • Check for any frayed or damaged cords or plugs.
  • Don’t arbitrarily discard the product, we should protect the environment.
  • Work environment: 5°C-35°C, 30%-90% humidity.
  • Storage environment: -20°C-60°C, 10%-90% humidity.

FCC STATEMENT

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

Warranty Card

  • Product NO.—————————————————
  • Product Order NO.———————————————
  • Maintenance Records————————————————-
  • Warranty Time—————————————————–
  • Nome————————-Phone/E-mall————————————–
  • Return Address—————————————————————–

Producer: Shenzhen Panlei Intelligent Technology Co., Ltd. Origin: Shenzhen, China Web: www.peladn.com. E-mail: support@peladn.com.

Address: No.5 Lirong Road, Xinshi Community, Dalang Street, Longhua New District, Shenzhen Tel: 400-998-3678.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals