Maxxima MRL-S61265 Slim Downlight With Night Light Installation Guide

: May 15, 2024
: Maxxima

Table of Contents

Maxxima MRL-S61265 Slim Downlight With Night Light
Product Information
Product Usage Instructions
INSTRUCTIONS
3 YEAR WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Maxxima MRL-S61265 Slim Downlight With Night Light

Product Information

Specifications

Model : MRL-S61265
Color Temperature Options : 2700K, 3000K, 3500K, 4000K, 5000K
Cutout Diameter : 158 mm (6.22 inches)
Warranty : 3 years limited warranty

Product Usage Instructions

Ensure that power is turned off before installation by switching off the circuit breaker or removing the fuse.
If replacing an existing fixture, remove the old light and make sure the ceiling hole matches the cutout diameter.
Choose the desired color temperature for the light.
Open the junction box and remove the appropriate knockout(s) on the side panel.
Feed the electrical supply wires through the knockout and secure them with a cable clamp.
Connect the ground wire to the green wire terminal, black wire to the hot wire terminal, and white wire to the neutral wire terminal using wire nuts.
Ensure all wiring is neatly placed in the junction box without any pinching.
Insert the junction box through the mounting hole and connect it to the LED connector.
Secure the fixture base into the mounting hole using spring-loaded clips.
Restore power and test the light fixture to ensure proper operation.

FAQ

Q: How do I activate the night light mode?
- A : To activate the night light mode, turn the light ON, OFF, ON within 3 seconds. The night light will now be activated.

For further inquiries or warranty-related concerns, please contact Maxxima at info@maxximastyle.com or 866-MAXXIMA (629-9462).

WARNINGS

Risk of fire or electric shock.
If you are unfamiliar with electrical installations, consult a qualified electrician before proceeding.
Turn the power off from the electrical panel before installation or maintenance.
Do not make or alter any holes in the wiring enclosure or modify any electrical componentry

CAUTIONS

Intended for installation in accordance with local codes and the National Electric Code (NEC).
This fixture is designed for use with 120VAC, 50/60Hz only.
IC rated.
Supply conductors must be rated for at least 90°C/194°F.
Suitable for damp locations.

INSTRUCTIONS

Maxxima-MRL-S61265-Slim-Downlight-With-Night-Light-
FIG1

Ensure that power has been turned off by switching the circuit breaker or by removing the fuse from the fuse panel.
If replacing a previous fixture, remove that light and ensure the hole in the ceiling corresponds to the correct cutout diameter of about 158 mm (6.22 inches).
Select the desired color temperature, see Figure 2.
Open the junction box and remove the appropriate knockout(s) on the side panel.
Insert the electrical supply wires through the knockout and secure with a cable clamp (not provided).
Using the provided wire nuts, connect the ground wire to the green wire terminal, black wire to hot wire terminal, and white wire to the neutral wire terminal, as shown in Figure 3.
Place all wiring and connections into the junction box, ensuring none are pinched.
Insert the junction box through the mounting hole. Align the connector from
- the j -box into the connector from the LED. Twist the connects in counter-clockwise directions and lock the quick connect, see Figure 4.
Push spring-loaded clips upwards and insert the fixture base into the mounting hole. Release clips and fixtures will be pulled flush with the ceiling, as seen in Figure 5.
- 9. Installation is now complete. Restore power and check the operation of the light fixture.
- Night light mode: turn the light ON, OFF, ON within 3 seconds. The night light is now on.

3 YEAR WARRANTY

Maxxima extends a 3-year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxxima product. This offer does not constitute in any way a product guarantee and Maxxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.