Maxxima MRL-S61230DWS 6 Inch Smart WiFi Slim Square LED Downlight Installation Guide

: May 15, 2024
: Maxxima

Table of Contents

Maxxima MRL-S61230DWS 6 Inch Smart WiFi Slim Square LED Downlight
SPECIFICATION
FCC STATEMENT
Mobile APP Set-up
Mobile App Operation
BlueTooth capability Instructions
- Amazon Alexa and Google Home voice control examples
Trouble-Shooting / Recommendations / Tips
3 YEAR WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Maxxima MRL-S61230DWS 6 Inch Smart WiFi Slim Square LED Downlight

Works with Standard ON/OFF Switch or DirectWire Installation

SPECIFICATION

WARNINGS AND CAUTIONS

Risk of fire and electrical shock, products should be installed under appropriate electrical codes and regulations.
The product shall be used together with an upstream air-gap switch.
If you are unsure about any part of these instructions, consult a licensed electrician.
DO NOT USE WITH AN IN-WALL DIMMER. Only Dimmable via the mobile APP.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION
Any changes or modifications to this unit not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Mobile APP Set-up

Step 1 Download the “Smart Life” App

Scan the QR code below to download the ‘ Smart Life App.
You can also download this app in the App Store/Android Playstore, search “Smart Life”

Step 2 Register an account and Login

Open the Smart Life App, click Register to create an account & log in.
If already registered, log in.

Step 3 Selecting the Device

Click ‘Add Device’ or the’+ ‘ in the top right-hand corner;
The light should automatically appear to add. If not, you can follow the next steps.
Click ‘Lighting’ then ‘Light Source (Wi-Fi)’ to enter the device connection interface.

Step 4 Mobile phone connection

Step 4a EZ mode connection: When the Slim Panel is on, switch the on/off switch 3 times (each interval within 1s), Off, On, Off, On, Off, On. The light will flash quickly (flash once every second), your device can connect to the light. The light will stop flashing once when the connection is successful. If there is no connection, the device will exit network configuration mode after 3 min.

Enter the Network Name & WiFi password for your home, and click Next.
Confirm the light is flashing, and click the device indicator is ‘fast blinking (0.5S/time)’.
The device will connect.

Step 4b AP mode connection:
When the Slim Panel is flashing quickly; turn the light off. Repeat turn the on/off switch 3 times to make the light flash slowly. The light will flash slowly (flash once every 2-3s), your phone can connect to the light. The light will stop flashing once when the connection is successful. If there is no connection, the device will exit network configuration mode after 3 min.

Enter the Network Name & WiFi password for your home and click Next.
Confirm the light is flashing slowly. Click “Blinking or breathing slowly”
Back out of the app and go to your device’s Wif settings. Connect to the light’s WiFi hotspot: “Smartlife-XXXX”
Return to the Smart Life App and wait for the connection to complete

Mobile App Operation

Select White to adjust the CCT and to Dim.
Select Color to adjust to the desired color, to Dim and adjust Contrast.
Click Schedule to set a on or off function of the light at a certain time/day(s).
Add schedule and then save. Repeat as desired.
Select Left Time to enable the Countdown Timer when the light is on. The time selected will automatically turn the light off after the desired time.
After the light connection is completed, it can be shared to many people, that is, one light can be controlled by multiple Users.
Click to enter the device details interface;
Click ‘Share Device’ to enter the device sharing interface.
Click ‘Add Sharing’, add the account you are willing to share.
You may also share all devices in your account with another account
Go to “Me” at the bottom of the App
Select “Home Management”
Select the Home you wish to share with
Select “Add Member”. You can send the invite via your Smart Life account, Message, or Email. New Members must have or create a Smart Life account via the Smart Life App

BlueTooth capability Instructions

When the smart lights’ internet connect was cut down, they can’t be controlled by app at the moment.But after 3~5mins, the smart lights will automatically switch to the Bluetooth control mode. At this time, you will still be able to control the product in a short distance through your mobile phone’s Bluetooth.

Note:

Make sure your phone has turned on the Bluetooth switch.
The product has been paired in your mobile phone and has not been deleted from the app.
Keep your mobile phone connected to the internet

Support Amazon Alexa and Google Home Set-up
For Amazon Alexa

Open the Alexa app and select “Skills” from the top menu
On the Skills page, search for Smart Life
Enable Smart Life in the Alexa App
Log in with your Smart Life Account (username & password)
Discover new smart devices in the App or ask Alexa to discover new devices For Google Home
Open the Google Home App and tap the “+” icon in the homepage
Select “Set up device” in the “Add and manage” Screen
In the “Set Up” screen, tap “New Devices” to set up new devices in your home
Tap “Works with Google” to authorize Google Home to work with your Smart Life account

Amazon Alexa and Google Home voice control examples

For Amazon Alexa

Alexa,turn on ‹device name>
Alexa,turn off
Alexa,set ‹device name> to percent
Alexa, brighten/increase
Alexa, dim/decrease

For Google Home

Hey Google, turn on
Hey Google, turn off
Hey Google,is on/off?
Hey Google,brighten/increase <device name)
Hey Google,Dim/Brighten by 50%

Trouble-Shooting / Recommendations / Tips

If the light is offline in the App, make sure the in-wall switch is in the On position. If not, turn on.
Please check whether the light is connected with power, and your mobile device is connected to a 2.4GHz WiFi Network.
Check the router. If the router is dual-band, make sure to select 2.4GHz network to add the light. Router Broadcast should be set to open. Also try disabling the 5GHz band temporarily on the router.
Make sure the WiFi User Name and Password are correct.
Make sure the light is within the range of the router signal. If not, try moving closer to the router. Check Wi-fi signal on the mobile device to make sure the signal is strong in that area or if it is weak.
Check to see if the maximum number of devices/lights the router can handle has been reached. If so, remove a device/light and restart the router. If there is no Wi-Fi connection, try restarting the light and/or restarting the router.
If the device will not go into pairing mode, try the on/off sequence 4 or 5 times instead of 3 times. Also give a second or 2 longer delay between the on/off sequence.
If the internet signal/connection from the internet provider is down, the light can still be controlled through the mobile device as long as both are connected to the same Network (Intranet).
If the internet signal/connection is down from your router, this light has a backup bluetooth function that will allow you to control the lights from a certain distance. Ensure bluetooth is enabled on your device.
For additional troubleshooting tips, visit the webpage listed below https://www.maxximastyle.com/wifi-help

3 YEAR WARRANTY

Maxima extends a 3 year limited warranty to the original purchase that the products listed are free from defects in material and/or workmanship only. Maxima will replace any warrantied product to the original consumer/purchaser if the product fails because of defects due to workmanship and/or materials within the limited warranty period. Limited warranty is not transferable and applies to the original installation of the Maxima product. This offer does not constitute in any way a product guarantee and Maxima does not hereby assume any obligation whatsoever beyond sending a free replacement product.