BOYA BY-WM3T2-M1 2.4GHz Wireless Microphone System User Manual

BOYA BY-WM3T2-M1 2.4GHz Wireless Microphone System

Introduction

The BOYA BY-WM3T2 is an ultracompact and portable 2.4GHz wireless microphone system for up to 2 people, compatible with cameras, smartphones, tablets and more. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound with remarkable ease of use. The BY-WM3T2 is ideal for content creation, live streaming, vlogging, mobile journalism and much more.

This series has 3 different receiver options: RXD, RXU, or RX35 included in the kits. The BY-WM3T2-TX Transmitter and BY-WM3T2-RX35 Receiver support up to 1 O hours of runtime. The BY-WM3T2-RXD and BY-WM3T2-RXU receivers are device powered and have USB-C charging ports, which support charging and powering of devices while in use.

Cautions

1. Don’t place this unit close to heat sources such as heater, oven, or other devices that produce heat.
2. When using and storing, please pay attention to dust and moisture.
3. For optimal sound pickup, please do not cover the microphone head with your hand.

Available Kits

Product Structure

BY-WM3T2-TX

1. Status indicator
   Status| Indicator
   ---|---
   Unpaired| Blinks blue and red alternately
   Successfully paired| Solid blue
   Mute ON| Blinks blue quickly (per second)
   Low battery| Blinks red (every 5 seconds)
   Noise Cancellation ON| Blinks blue slowly (every 2.5 seconds)
   Noise Cancellation OFF| Solid blue
   Charging| Solid red
   Fully charged| Light off

Note: If charging the unit when it is ON, the indicator will display the current working status instead of charging status.

2. Power/Mute button
   Long press the button for 2 seconds to turn on/off the unit.
   Short press the button to mute/unmute the microphone.
   Double click the button to turn on/off noise cancellation

3. Belt clip

4. Built-in mic

5. USB-C charging port
   For charging the transmitter.

BY-WM3T2-RXU

1. Status indicator
   **** Status| Indicator
   ---|---
   Unpaired| Blinks blue
   Successfully paired| Solid blue

2. USB-C connector
   It can be connected to an Android phone, tablet or other USB-C devices.

3. USB-C charging port
   When the BY-WM3T2-RXU is plugged into an external device, the external device can be powered via this charging port.
   Note: Most USB-C devices can be charged through this port, which also supports QC2.0, PD2.0 fast charging protocols.

BY-WM3T2-RXD

1. Status indicator
   Status| Indicator
   ---|---
   Unpaired| Blinks blue
   Successfully paired| Solid blue

2. Lightning connector
   It can be connected to an iOS Lightning device.

3. USB-C charging port
   When the BY-WM3T2-RXD is plugged into an external device, the external device can be powered via this charging port.
   Note: iPad and iPhone can be charged through this port, which also supports up to 3A fast charging.

BY-WM3T2-RX35

1. Status indicator
   **** Status| Indicator
   ---|---
   Unpaired| Blinks blue and red alternately
   Successfully paired| Solid blue
   Low battery| Blinks red (every 5 seconds)
   Charging| Solid red
   Fully charged| Light off

Note: If charging the unit when it is ON, the indicator will display the current working status instead of charging status.

2. Power button
   Long press the button for 2 seconds to turn ON or OFF the unit.

3. USB-C charging port
   For charging the receiver.

4. 3.5mm TRS connector
   It can be connected to cameras, recorders, mixers or other devices with a 3.5mm TRS jack.

How to Use

For the kit of BY-WM3T2-U1/ BY-WM3T2-U2/ BY-WM3T2-D1 / BY-WM3T2-D2

1. Press and hold the power button for 2 seconds to turn on the Transmitter(s).
2. Plug the BY-WM3T2-RXD into an iOS device or the BY-WM3T2-RXU into a USB-C device.
3. Transmitter(s) and receiver will be automatically paired within 1 0 seconds.
4. You are ready to record.

For the kit of BY-WM3T2-M1/ BY-WM3T2-M2

1. Plug the BY-WM3T2-RX35 into a device with a 3.5mm TRS jack.
2. Press and hold the power button for 2 seconds to turn on the transmitter(s) and receiver.
3. Transmitter(s) and receiver will be automatically paired within 10 seconds.
4. You are ready to record.

Note: Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from the devices with 2.4GHz frequency, such as high-power Wi-Fi antennas, radios, etc.

Specifications

RXU/RXD: 46×26.2×9 mm
RX 35: 53.7x36x 13.5 mm
Weight| TX: 8.Sg (0.30 oz)
RXU/RXD: Sg (0.18 oz)
RX35: 10.Sg (0.37oz)

Packing List

BY-WM3T2-U1

• BY-WM3T2-TX transmitter xl
• BY-WM3T2-RXU receiver x1
• USB-C charging cable xl
• Foam windscreen xl

BY-WM3T2-D1

• BY-WM3T2-TX transmitter xl
• BY-WM3T2-RXD receiver xl
• USB-C charging cable xl
• Foam windscreen xl

BY-WM3T2-M1

• BY-WM3T2-TX transmitter xl
• BY-WM3T2-RX35 receiver X1
• USB-C charging cable x2
• Foam windscreen xl

BY-WM3T2-U2

• BY-WM3T2-TX transmitter x2
• BY-WM3T2-RXU receiver xl
• USB-C charging cable x2
• Foam windscreen x2

BY-WM3T2-D2

• BY-WM3T2-TX transmitter x2
• BY-WM3T2-RXD receiver xl
• USB-C charging cable x2
• Foam windscreen x2

BY-WM3T2-M2

• BY-WM3T2-TX transmitter x2
• BY-WM3T2-RX35 receiver Xl
• USB-C charging cable x3
• Foam windscreen x2

Customer Support

1F0300300541

www.boya-mic.com

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd.

TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com / www.jiayz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>