BOYA K1 Wireless Lavalier Microphone User Manual
- June 1, 2024
- Boya
Table of Contents
BOYA K1 Wireless Lavalier Microphone
Product Specifications
- Product Model : K1
- Receiver Type : Type-C and Lightning
- Microphone Power: Below 3.4V – Low power blue light flashing, Below 3.2V – Automatic shutdown
Product Usage Instructions
Pairing and Connecting the Microphone
- Insert the receiver into your device’s Type-C or Lightning socket.
- Turn on the microphone by pressing and holding the on/off key for 3 seconds.
- The microphone and receiver will automatically connect and pair successfully when the green lights on both devices are always on.
Charging Instructions
Make sure the OTG Connection setting is enabled on your phone before
charging the microphone.
Key Functions
- Microphone Switch: Press and hold for 3 seconds to turn on/off.
- Indicator Lights: Green light indicates normal mode, blue light indicates noise mode.
FAQ
-
What should I do if my microphone’s power is below 3.4V?
If the microphone’s power is below 3.4V, the low power blue light will flash. Please charge the microphone to avoid automatic shutdown. -
Can the product be disassembled or exposed to high temperatures?
No, it is advised not to disassemble, impact, crush, expose to fire, or place in high-temperature environments to ensure product safety and functionality.
Introduction
- Dear users, thank you for choosing this product. In order to further understand the product,please read this manual carefully before use. I wish you a pleasant experience!
- This product is a smart Wireless Lavalier Microphone that provides professional-grade recording output. Plug and play,noapp required. Multiple uses: It can be used in online live broadcast, video Vlog shooting, program interview,recording, video teaching and other occasions.
- The Wireless Lavalier Microphone consists of two parts, one is Microphone transmitter, the other one is Phone receiver.(See as below picture)
ID Diagram
- Microphone switch
- TYPE-C charging
- 3.5mm Ear back socket
- Indicator light
- Recording slot
- Receiving light
- Type-c/Lightning socket
- TYPE-C Receiving device charging interface
Note: some Android phones or apple phones may have incompatibility problems due tos ystem reasons, Please consult the dealer for details.
How to use
Take Android phones as an example. After successful pairing,the green light on the microphone is always on and the red light on the receiver is always on.
- Insert the receiver into the device
- Turn on the microphone
- The microphone and receiver are automatically connected and paired successfully . The green light of the microphone is always on and the green light of the receiver is always on.
Note: Make sure the “OTG Connection” setting is enabled on your phone
Key function operation
Product specification
Microphone power and charging instructions:
- Below 3.4V, enter the low power blue light flashing
- Below 3.2V, automatic shutdown
Packing List
Content of packing:
- Microphone transmittter
- Phone receiver
- Type-C charging cable
- User manual
Safety warning
- do not disassemble, impact, crush or put into fire,
- do not continue to use in case of severe swelling.
- do not place in high temperature environment.
- do not use the battery after soaking in water!
- this product contains small accessories. Please place out of the reach of children to avoid suffocation caused by accidental swallowing.
FCC Warnings
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. Thedevice can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>