BOYA VG350 Smart Phone Video Kit User Manual

: June 5, 2024
: Boya

BOYA VG350 Smart Phone Video Kit User Manual

We thank you for your decision and wish you much pleasure and success with your new device.

Introduction:

The BOYA Waimea pro VG350 Smartphone Video Kit is a multifunctional set consisting of a mini tripod with extension and ball head, universal smartphone holder with hot shoe, Boya shotgun microphone MM1 + including damped Ricotta Lyre mount, LED battery light as well as accessories (cold shoe clamp mount, 2x connection cables, charging cable, furry windscreen).

With this video kit, you set up your smartphone as a camera with light and sound in such a versatile and precise way that you can take photos and videos in the classic landscape format as well as in the mobile-friendly portrait format, and also stream them live.

The external microphone connects to your smartphone with one of the connection cables. It delivers crystal-clear sound of the highest quality.

The tripod with extension and ball head is also suitable for other cameras. With the legs folded together, it can be used as a handle for tracking shots.

Read these instructions carefully before using your new device for the first time. They contain everything you need to know to avoid personal injury and damage to property.
Observe all safety instructions in this user manual.
Keep these instructions in a safe place. Pass these instructions on to the new owner if you sell or otherwise transfer the device.

1. How to understand the instruction manual

1.1 Markings on the device

This marking means that your device should only be disposed of in local disposal points.

1.2 Markings in the manual

BOYA VG350 Smart Phone Video Kit User Manual - Markings in the
manual

2. Intended Use

The BOYA Waimea pro VG350 Smartphone Video Kit is a versatile all-in-one- package with tripod for photo and video applications that is particularly easy to store and transport. Various smartphones can be accommodated in the smartphone holder. It can be set up quickly and without tools, is stable and can be adjusted individually.
The microphone greatly improves the sound quality of the recording. With the battery light, you can provide balanced lighting even in dark environments.

Your package features the following main features:

All-in-one package for professional video shooting with the smartphone
High-quality super cardioid microphone for crystal-clear sound, even in windy conditions thanks to furry windscreen
High-quality rechargeable LED light with dimmable brightness
High-quality aluminium mini tripod, maximum stability thanks to two spread positions of the legs, incl. ball head

3. Important safety notes

CAUTION
Cautions when using rechargeable batteries

Do not place the battery in a fire or expose it to direct heat.
Do not charge the battery unattended.
Disconnect the charger from the mains after charging is complete.

Danger due to humidity

Do not use the video kit in rain or snowfall.
Moisture ingress can impair the functionality of the microphone, the plug connections and the lamp.

4. Unpacking and checking the device

Carefully unpack the scope of delivery.
Check that all the items are included in the delivery:
BOVA by walime/pm
• 1x Walimex pro Boya MM1 + Shotgun Microphone with 3.5 mm jack plug
• 1 x Rycote Lyre Microphone Holder
• 1x Mini LED lamp
• 1 x Universal smartphone holder
• 1x Tripod
• 1x Ball head
• 1x Tripod extension, extendable
• 1x Fur windscreen
• 1x LED mount for smartphones
• 1x 3.5 mm jack plug connection cable TRS
• 1x 3.5 mm jack plug connection cable TRRS
• 1x USB charging cable
• 1x safety instruction sheet
Check whether all parts of the unit are undamaged.

NOTE: If the scope of delivery is incomplete or damaged, please contact info @foto-walser.de.

5. Overview of the components of the set

BOYA VG350 Smart Phone Video Kit User Manual - Product
Overview BOYA VG350 Smart Phone
Video Kit User Manual - Product Overview

Mini tripod
Ball head
Smartphone holder (smartphone not included)
Microphone holder
Boya MM 1 + microphone

Mini tripod

Mounting plate with 1/4 inch thread
Tripod leg, rubberised
Locking ring for leg angle adjustment

Ball head

Locking screw
Mounting plate with 1/4 inch thread
1 /4 inch threaded bore (underside)

Boya BY-MM1 + Microphone

Line out 3.5 mm jack socket (underside)
Headphone jack 3.5 mm (underside)

Rycote Lyre microphone holder

Attachment for hot and cold shoes with locking screw and 1/4 inch thread (underside)

Smartphone holder with 1/4 inch threaded bore (underside)

Cold shoe
LED light
Brightness switch (H / M / L)
On / Off switch
Charging port (Micro USB)
Charging indicator
Mount for hot and cold shoe with locking screw and 1 /4 inch threaded bore (underside)
Clamp mount cold shoe
Tripod extension, telescopic
Screw grip
Furry windscreen
TRRS connection cable for smartphones, tablets and computers
TRS connection cable for cameras, camcorders, audio recorders and other recording devices
USB charging cable for LED light

6. Operation

WARNING
Observe the safety instructions in the respective sections for all activities.

6.1 Using the mini tripod

The tripod can be folded from any position and used as a handle for one-handed tracking shots. To change the leg angle, the legs must be folded.
To make the leg angle more acute so that the tripod stands higher, turn the locking ring (8) clockwise until it engages. To set a flatter angle for a lower and more stable stand, turn the locking ring (8) anticlockwise.

6.2 Using the tripod extension

The tripod extension allows the ball head to be mounted at a greater height than directly on the tripod. Since it can be adjusted in height, more flexible working with the camera or smartphone is possible.
Screw the tripod extension (23) onto the 1 /4 inch thread of the tripod and the ball head (2) onto the thread on the tripod extension. To adjust the height, open the screw handle (24) and pull the extension to the desired height. Screw the screw handle (24) tight again.

6.3 Using the ball head

Mounting the ball head on the tripod
Screw the ball head (2) with the threaded bore (11) in the base onto the threaded mounting plate (6) of the tripod. Make sure that the locking screw (9) is tightened.

Mounting equipment on the ball head
Mount equipment such as the smartphone holder (3) or a camera by screwing the mounting plate (10) into the equipment’s bore using the 1 /4 inch thread.
The smartphone holder provides a 1 /4 inch thread in the bottom for this purpose.

Framing the shot
Adjust the smartphone (or camera) to the desired position by opening the locking screw (9) of the ball head while holding the mounted equipment. Then align the smartphone so that the desired picture section appears in the display of the smartphone mounted in the holder. Make sure that the tripod does not tip. Now tighten the locking screw again.

Working in portrait format
Use the drop notch of the ball head and tilt the camera from horizontal to vertical. Make sure that the tripod is standing securely.

6.4 Using the microphone and microphone holder

Slide the microphone holder (4) with the square plate of the base (14) into the cold shoe (15) of the smartphone holder (3). Make sure that the microphone will later face the sound source. Tighten the foot with the locking screw (14). Insert the microphone (5) with the narrowest part into the microphone holder (4). Plug the matching connection cable with the angled plug into the connection socket (12) of the microphone. In case of wind, pull the furry windscreen (25) over the microphone.

NOTE: Mount the smartphone before connecting the microphone cable to it.

6.5 Using the LED light

The LED light (16) provides up to three hours of light on one battery charge. Use the switch (18) to turn it on or off, the switch (17) allows you to select the brightness in three levels:
L = Low
M = Medium
H = High

To charge the battery, plug the USB charging cable (28) into the charging port (19). The charging indicator (20) lights up red during charging, after charging is finished it no longer lights up.

As a rule, mount the light on your smartphone. To do this, use the Clamp mount cold shoe (22), which you can attach to your smartphone with the padded screw. You can mount the lamp on the cold shoe located there, see the previous chapter. Of course, you can also mount the microphone there and the light on the smartphone holder (3).

6.6 Inserting the smartphone

The universal smartphone holder grips a wide range of smartphones between 56 and 88 mm wide. To insert a smartphone, proceed as follows:
Detach the smartphone from any cases that might interfere with the mount. Pull the smartphone holder (3) apart at the ends and insert the smartphone so that it is held approximately in the middle. The display should face you and not be covered by the holder. Make sure that the holder grips the smartphone ideally with its notches and clamps it.
Now connect the external microphone to the smartphone, if you are going to use it.

7. Tips for use

7.1 Light

You are not forced to mount the LED light close to the camera. Instead, you can illuminate it on the subject from any other directions, even from behind or indirectly. The different lighting creates a different effect each time. Ask another person to hold the light for you in a certain position relative to the camera.

7.2 Sound

The microphone does not have to be mounted near the smartphone either. The cables give you a certain amount of freedom and can also be extended (you can find appropriate cables in specialised shops). A different positioning of the microphone changes the sound recording and enables crucial improvements depending on the recording situation. Use headphones for continuous monitoring of the recording.