VIGO VG08008 Mateo Shower Massage Panel Installation Guide
- June 1, 2024
- VIGO
Table of Contents
VIGO VG08008 Mateo Shower Massage Panel
INSTALLATION MANUAL
MODEL NUMBER
VIGO Mateo Shower Massage Panel With Spout
PRODUCT FEATURES
- Hydrotherapy revitalization through pressurized water massage jets
- 6 fully adjustable body spray massage jets
- Great water pressure with 60 psi
- Pre-plumbed panel can be easily installed on flat walls or in corners
- Easy to install with standard 1/2″ plumbing connection
- Eco-friendly 2.5 gpm flow rate without sacrificing performance
CERTIFICATE
cUPC certified by IAPMO
PACKING LIST
- Shower panel
- Hand shower
- Hand shower hose
- Supply lines
- Mounting hardware
TOOLS /
- Tape Measure
- Pencil
- Soft Cleaning Rag
- Ear Protection
- Eye Protection
- Safety Gloves
Dimensions
FRONT VIEW
SIDE VIEW 
TOP VIEW
MEASUREMENTS
- Height 59 15/16″
- Width (1523mm) 7
- Depth ” (178mm) 20
- Le Flow Rate 1/2″ (521mm) 2.5 gpm
SHARE YOUR VIGO PRODUCT AND GET FEATURED!
We hope you love your new VIGO item as much as we do! Feel free to leave a review on vigoindustries.com and don’t forget to share any photos on Instagram with #vigoindustries The best renovations will be featured on blog.vigoindustries.com and @vigoindustries social media.
Parts List
Installation Steps
Installation must be done by a qualified licensed plumber.
FLAT INSTALLATION
-
STEP 1
Place shower panel on its side up against the wall to your desired height. We recommend positioning shower head at least 150mm higher than your height. -
STEP 2
Mark the wall at the bottom of each bracket attached to shower panel. -
STEP 3
Using these markings, place wall mount bracket on the wall with the markings just above the outward bend in the bracket and mark hole locations for drilling
-
STEP 4
Please make sure the water lines from the wall are located at the following max distance from the bottom of the shower panel, in order to fit hoses in the rear of the shower panel. -
STEP 5
Drill 15/64″* diameter holes into wall at desired height. Tap anchors into the drilled holes. Screw wall mount brackets to the wall. -
STEP 6
Connect hot and cold supply hoses to water source coming from wall.
-
STEP 7
Make sure connections are secure. Test connections for any leaks prior to securing shower panel to the wall. -
STEP 8
Place shower panel onto wall with rear brackets just above the wall mount brackets and slide downward to secure panel to the wall.
-
STEP 9
Make sure the supply line connections are outside of the wall, behind the shower panel. -
STEP 10 /
Connect hand shower hose to shower panel. Make sure washer is in place. -
STEP 11
Connect other side of hand shower hose to hand shower. Make sure screen is in place.
-
STEP 12
Install hand shower bracket to wall in desired location.
CORNER INSTALLATION
-
STEP 1
Place shower panel on its side up against the wall to your desired height. We recommend positioning shower head at least 150mm higher than your height. -
STEP 2
Mark the wall at the bottom of each bracket attached to shower panel. -
STEP 3 /
Using these markings, place wall mount bracket on the wall with the markings just above the outward bend in the bracket and mark hole locations for drilling.
-
STEP 4
Please make sure the water lines from the wall are located at the following max distance from the bottom of the shower panel, in order to fit hoses in the rear of the shower panel. -
STEP 5 /
Drill 15/64″ diameter holes into wall at desired height. Tap anchors into the drilled holes. Screw wall mount brackets to the wall. -
STEP 6
Connect hot and cold supply hoses to water source coming from wall.
-
STEP 7
Make sure connections are secure. Test connections for any leaks prior to securing shower panel to the wall. -
STEP 8
Place shower panel onto wall with rear brackets just above the wall mount brackets and slide downward to secure panel to the wall.
-
STEP 9
Make sure the supply line connections are outside of the wall, behind the shower panel. -
STEP 10
Connect hand shower hose to shower panel. Make sure washer is in place. -
STEP 11
Connect other side of hand shower hose to hand shower. Make sure screen is in place.
-
STEP 12
Install hand shower bracket to wall in desired location.
SHOWER PANEL LIMITED LIFETIME WARRANTY
VIGO INDUSTRIES, LLC (“VIGO”) EFFECTIVE JULY 1, 2023
VIGO offers the following limited warranty on each of its SHOWER PANEL
Products* (the “Product”). This warranty extends only to the original
purchaser/end-user for personal household use and is not transferrable. For
commercial use, additional limitations apply. VIGO warrants the mechanical
components to be free from defects in workmanship and materials under normal
household use for the period of FIVE (5) years from the initial date of
purchase by the purchaser/end-user, contractor, or builder, from VIGO or an
authorized VIGO Dealer. VIGO warrants the finish of the Product to be free
from defects in workmanship and materials under normal household use for the 3
years for the finish of the product by the original purchaser/end-user.
Subject to the Warranty provisions below, any product reported to VIGO or an
authorized dealer as being defective within the warranty period will receive
replacement parts and/or troubleshooting assistance to correct the issue. If a
replacement unit is deemed necessary by VIGO, the replacement will be made
with the same model (or with a product of equal value). This warranty extends
to the original purchaser/end-user and is not transferrable to a subsequent
owner. Neither the distributor, authorized dealer, nor any other person has
been authorized to make any affirmation, representation, or warranty other
than those contained in this warranty. Products sold in “as-is” condition,
closeouts, discounted, resale, return purchases or purchases made through non-
authorized dealers are not covered under the terms of this warranty. Any
affirmation, representation, or warranty other than those contained in this
warranty shall not be enforceable against VIGO or any other person. VIGO
reserves the right to modify this warranty at any time with the understanding
that such modifications will not alter the warranty conditions applicable at
the time of sale for the products in question.
LIMITATIONS
This warranty shall not apply to instances of incorrect operating procedures,
breakages, or damages caused by fault through improper installation,
carelessness, abuse, misuse, misapplication, improper maintenance, or
alteration of the Product, as well as damage due to hard water, chemical or
natural corrosion, accident, fire, flood, an act of God, or any other
casualty. When cleaning, handling, and maintaining the Product, avoid abrasive
cleaners, steel wools, and harsh chemicals as these will scratch, damage
and/or dull the product and/or finish and void this warranty. The owner/end-
user of the Product covered by the present warranty is entirely responsible
for all labor costs, proper installation and any applicable plumbing or
electrical wiring. VIGO neither installs nor supervises installation, nor
hires contractors for this purpose. VIGO cannot be held responsible for any
default, breakage, or damages caused thereby or resulting thereof, either
directly or indirectly. The owner/end-user must provide requested images,
photos, videos of the Product as described in the installation guide so that
VIGO can properly troubleshoot and execute the warranty specified herein. All
repair expenses and labor are the responsibility of the owner/end-user. This
warranty does not apply to Products that have not been installed or operated
in accordance with instructions supplied by VIGO and all applicable rules,
regulations, and legislation pertaining to such installations. This warranty
does not apply unless the VIGO Product is installed by a fully insured,
licensed professional. VIGO strongly recommends that such licensed
professional have experience in the installation of bathroom and kitchen
products. Installation of certain products, including but not limited to glass
products (i.e. shower doors and glass sinks) by an inexperienced person may
result in glass breakage, and consequently may cause personal injury or death.
VIGO is not liable for personal injuries or deaths to any persons or for any
direct special, incidental or consequential damage, loss of time, loss of
profits, inconvenience, incidental expenses, labor or material charges, or
other costs resulting from the use of the Product or equipment pertaining to
the application of the present warranty, or resulting from the removal or
replacement of any product or element or part covered by this warranty.
EXCEPT AS OTHERWISE PROVIDED ABOVE, VIGO MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURCHASE OR COMPLIANCE WITH ANY CODE. VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner /end-user, contractor, builder, or other installation professional.
COMMERCIAL LIMITATIONS
In addition to the above conditions and limitations, the warranty period for
the products installed for commercial applications or used in commercial
ventures is ONE (1) year from the initial date of purchase by the owner/end-
user, contractor, or builder from an authorized dealer. VIGO is not
responsible for loss of use or profit under any circumstances. If the product
is used as a display, the warranty period begins when the product is placed on
display. This warranty gives the owner/end-user specific legal rights. The
owner/end-user may also have other rights which may vary from one state or
province to another.
WARRANTY CONDITIONS
In order to obtain the warranty provided, please contact the VIGO Product
Support Department during normal business hours at
866-591-7792, option 2 or via email at
SUPPORT@VIGOINDUSTRIES.COM VIGO will
assist with troubleshooting and provide replacement parts as described above
when the following conditions have been met: the failure is of the nature or
type covered by the warranty; the user has informed VIGO of the nature of the
problem during the warranty period; conclusive evidence (e.g. proof of
purchase and images, video, etc.) is provided to the foregoing by the user
proving that the failure occurred or was discovered within the warranty
period. VIGO’s warranty obligation shall be discharged upon tender of
replacement parts or product replacement. The customer’s refusal to accept the
tender terminates VIGO’s warranty obligations.
*Certain models are pending approval. Certification may be ended by VIGO or certification agencies without notice.
CLEANING RECOMMENDATION FOR VIGO PRODUCTS
Modern faucets and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. Be sure to avoid using abrasive materials while cleaning VIGO products.
CLEANING INSTRUCTIONS FOR FAUCETS AND SHOWERS
Please follow the instructions on your cleaning materials. In addition, pay attention to the following points:
- Clean the faucets and showers as needed and when required.
- The amount of cleaning product needed and the time the cleaner needs in order for effective cleaning to take place should be adjusted according to products; cleaning product should not be left on VIGO product longer than necessary.
- Clean regularly to prevent calcification.
- When using spray cleaner, spray first onto a cloth or sponge – never directly spray onto the sanitary tapware as drops could enter openings and gaps and cause damage.
- After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
- Recommended cleaning solution for hard water and soap scum is to use 50/50 water and vinegar solution.
CLEANING MATERIAL FOR FAUCETS AND SHOWERS
Acids are necessary ingredients of cleaning materials for removing lime,
however, please pay attention to the following points when cleaning faucets
and showers:
- Only use cleaning materials that are explicitly provided for this type of application.
- Never use cleaning materials that contain hydrochloric, formic or acetic acid, as they cause considerable damage.
- Phosphoric acid is also restricted as it can cause damage to the finish. Never mix any cleaning material with another.
- Never use cleaning materials that have an abrasive effect, such powdered and industrial cleansers, scouring pads or microfiber cloths.