BOYA WMic5-M1 Ultracompact 2.4GHz Dual Channel Wireless Microphone System User Manual

BOYA WMic5-M1 Ultracompact 2.4GHz Dual Channel Wireless Microphone System User Manual

Statement

“Thanks for choosing BOYA!
Please read this manual carefuly before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future. reference. If you need further assistance than the user manual,please consult your retailerfor help or email us: sales@boya-mic.com

General Introduction

BOYAWMIcSis an incredibly lightweight, and easy-to-use wireless microphone system for up to 2 people, adopting 24GHz wireless transmission technology. ‘The microphone delivers exceptional and broadcast-quality sound to DSLR, mirrorless and video cameras, smartphones, tablets, computers, etc. It i ideal for content creation, vlogging, mobile journalism, and more.

With capabilties of mute and noise cancellation, the small and light WMic5-TX transmitter has a built-in omnidirectional microphone and with 360-degrees. of sound pickup. The magnetic belt clp of transmitter can be used with the ‘magnetic nameplate (sold separately), which can be easily clipped to shirts and clothing.

The series has WMic-RX/ WMics-RXD/ WMicS-RXU receiver to choose from, featuring selectable Mono/ Stereo output setting and supporting monitor the sound in real-time. WMicS TX transritter and WMicS.RX receiver of the serles. provide long operating lfe for your recordings (up to about 10 hours for TX; about 20 hours for RX). WMic5-RXD receiver features a MFi Certified Lightning output, designed for 10 devices, while WMics-RKU receiver features a USB-C output, designed for devices with a USB-C port.

Cautions

1. Disintegration of this device by non-professionals s strictly prohibited.
2. Please keep it away from heat sources such as heaters or ovens.
3. D0 not remove the battery without professionals’ help.
4. Please clean the device with only a soft, dry cloth.
5. When using and storing, please keep away from the dust and moisture.
6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover

Available Kits

Product Structure

Wireless Transmitter WMic5-TX

Status Indicator

+-/NR Button –

• Press +/- button to adjust mic gain (totally 6 levels), The setting is retained even after the power is turned off.
• Press and hold or continuously press “+”/ ™” 10 adjust mic gain to maximum/ minimum level, the indicator blinks blue twice rapidly.
• Press the NR button (press both “+”and“-“buttons at the same time) to turn on/off noise cancellation. Defaut setting s off.

USB-C Charging Port (DC 5V)
Use the included USB-C charging cable to charge the transmitter.
Magnetic Belt Clip
Built-in Microphone

Wireless Receiver WMic5-RX

Power Button

+ or /S Button

• Press +/- button to adjust  output volume (totally 6 levels). The setting is retained even after the power s turned off.
• Press and hold or continuously press “+”/*to adjust output volume to maximum/ minimun level, the indicator blinks blue twice rapidy.
• Press the M/S button (press both +and ” buttons at the same time) t0 set the output mode to mono or stereo. When in mono mode, the audio from the left and right channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output. Default setting is mono.

Belt Clip
USB-C Charging Port (DC 5V)
Use the included USB-C charging cable to charge the receiver.
mm Headphone Output
Connect headphones for audio monitoring.
LINEOUT Jack
Connect the WMic5-RX to a smartphone, tablet, camera, recorder or mixer with the included output cables.

WMic5-RXD:
Compact Receiver with Lightning Connector

1. MFi Certified Lightning Connector It can be connected to an i0S Lightning device.

2. Status Indicator
   

3. Pair Button

4. Mono/ Stereo Switch
   The output mode can be toggled between mono and stereo. When in mono mode, the audio from the left and tight channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output.

5. mm Headphone Jack
   Connect headphones for audio monitoring,

WMic5-RXU:
Compact Receiver with USB-C Connector 

1. It can be connected to an Android smartphone, tablet or other USB-C devices.
2. **Status Indicator

   ---

3. Pair Button

4. Mono Stereo Switch
   ‘The output mode can be toggled between mono and stereo. When in mono mode, the audio from the left and right channel will be mixed. When in stereo mode, the audio from the left and right channel will be separated to the left and right of the stereo output.

5. mm Headphone Jack
   Connect headphones for audio monitoring.

Operation

For the WMic5-M1/WMic5-M2 kit

1. Press and hold the power button for 3 seconds to turn on the WMIc5-TX transmitter and the WMics-RX receiver.
2. paiting Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps: (D) Press the TX’s and RX’s power button twice in the on state to enable pairing mode. The indicators of both blink blue rapidly. @ Transmitter and receiver will be successfully paired within 5 seconds The indicators of both light up static blue.
3. Connect the receiver to the mic input of a camera, recorder or mixer with the supplied 3.5 mm TRS to TRS cable; or connect it to a smartphone, tablet, or computer with the supplied 3.5 mm TR to TRRS cable.
4. You are ready to record.

For the WMic5-M3 / WMic5-M4 / WMic5-M5 / WMic5-M6 kit

1. Press and hold the power button for 3 seconds to turn on the transmitter.
2. Plug the WMic5-RXD into an i0S device or the WMic5-RXU into a USB-C device.
3. Pairing Before leaving factory, the system is pre-paired. Therefore, the connection will be established once they are powered on. If they are disconnected, please follow below steps: (Press the transmitter’s power button twice in the on state to enable. pairing mode. Its indicator blinks blue rapidly. ZPress and hold the receiver’s pair button for 3 seconds to enable pairing mode. Its indicator blinks blue rapidly. (Transmitter and receiver will be successfully paired within 5 seconds. The indicators of both light up static blue.
4. You are ready to record.

Note: Due to the 2.4GHz wireless frequency is widely used, the signal may be easily attenuated or interfered. Please try to avoid obstacles while using, such as walls and buildings. And keep away from the devices with 24GHz frequency, such as high-power Wi-Fi antennas, radios, etc.

Specifications

WMic5-TX Transmitter

WMic5-RX Receiver

3.5 mm TRS Output Jack
Weight| Approx. 32 g (1.1 oz)
Dimensions| 62.1×31.6×16.5 mm
Operating Temperature| -10°C to 50°C
Storage Temperature| -20°C to +60°C

WMic5-RXD Receiver

MFi Certified Lightning Connector
Power Requirements| Supplied by iOS Devices
Antenna| PIFA
Weight| Approx. 14.S g (0.’i oz)
Dimensions| 75.6×23.2×12 mm
Operating Temperature| -10°C to S0°C
Storage Temperature| -20°C to +60°C

WMic5-RXU Receiver

USB-C Connector
Power Requirements| Supplied by USB-C Devices
Antenna| PIFA
Weight| Approx. 14.5 g (0.5 oz)
Dimensions| 75.6×23.2×12 mm
Operating Temperature| -10°C to 50°C
Storage Temperature| —20°C to +60°C

Packing List

Wics-m1

• 1x WMic5-tx Transmitter
• 1x WMics-RX Receiver
• 2xUSB-C Charging Cable
• 1x Fur Windshield for Built-in Microphone
• 1x 35 mm TRS to TRS Output Cable for Cameras
• 1x 3.5 mm TRS to TRRS Output Cable for Smartphones

WMics-M2

• 2XWMic5-TX Transmitter
• 1x WMics-RX Receiver
• 3x USB-C Charging Cable
• 2x Fur Windshield for Built-in Microphone 1 3.5 mm TRS to TRS Output Cable for Cameras
• 1x 3.5 mm TRS to TRRS Output Cable for Smartphones

WMics-M3

• 1XWMicS-TX Transmitter
• 1x WMic5-RXD Receiver 1x USB-C Charging Cable 15 Fur
• Windshield for Built-in Microphone

WMics-M4

• 2% WMics TX Transmitter
• 1x WMics-RXD Receiver 2x USB-C Charging Cable
• 2x Fur Windshield for Built-in Microphone

WMics-M5 1XWMicSTX Transmitter 1XWMics-RXU Recelver 1x USB-C Charging Cable 5 Fur

• Windshield for Built-in Microphone

WMics-M6

• 2X WMics TX Transmitter
• 1 WMics-RXU Receiver
• 2x USB-C Charging Cable
• 2x Fur Windshield for Built-in Microphone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>