BOYA BY-WM3T2-U1 2.4GHz Dual-channel Wireless Microphone System User Manual

June 5, 2024
Boya

**BOYA BY-WM3T2-U1 2.4GHz Dual-channel Wireless Microphone System User Manual

**

Introduction

The BOYA BY-WM3T2 is an ultra compact and portable 2.4GHz wireless microphone system for up to 2 people, compatible with mobile devices. It features automatic pairing and selectable noise cancellation. The BY-WM3T2 is ideal for live streaming, vlogging, and other audio capturing applications.

Cautions

  1. Don’t place this unit close to heat sources such as heater, oven, or other devices that produce heat.
  2. When using and storing, please pay attention to dust and moisture.
  3. For optimal sound pickup, please do not cover the microphone head with your hand.

Product Structure

BY-WM3T2-TX
Product Structure

  1. Status indicator
    Status| Indicator
    ---|---
    Unpaired| Blinks blue and red alternately
    Successfully paired| Solid blue light
    Mute ON| Blinks blue quickly (per second)
    Low battery| Blinks red every 5 seconds
    Noise Cancellation ON| Blinks blue slowly (every 2.5 seconds)
    Noise Cancellation OFF| Solid blue light
    Charging| Solid red light
    Fully charged| Light off

Note: If charging the unit when it is ON, the indicator will display the current working status instead of charging status.

  1. Power/Mute button
    Long press the button for 2 seconds to turn on/off the unit.
    Short press the button to mute/unmute the microphone.
    Double click the button to turn on/off noise cancellation

  2. Belt clip

  3. Built-in mic

  4. USB-C charging port
    Use the supplied USB-C charging cable to charge the unit.

BY-WM3T2-RXU
Product Structure

  1. Status indicator
    Status| Indicator
    ---|---
    Unpaired| Flashing blue light
    Successfully paired| Solid blue light

  2. USB-C connector
    It can be connected to an Android phone, tablet or other USB-C devices.

  3. USB-C charging port
    When the BY-WM3T2-RXU is plugged into an external device, the external device can be charged via this charging port.
    Note: Most USB-C devices can be charged through this port, which also supports QC2.0, PD2.0 fast charging protocols.

BY-WM3T2-RXD
Product Structure

  1. Status indicator
    Status| Indicator
    ---|---
    Unpaired| Flashing blue light
    Successfully paired| Solid blue light

  2. Lightning connector
    It can be connected to an iOS lightning device.

  3. USB-C charging port
    When the BY-WM3T2-RXD is plugged into an external device, the external device can be charged via this charging port.
    Note: iPad and iPhone can be charged through this port, which also supports up to 3A fast charging.

How to Use

  1. Press and hold the power button for 2 seconds to turn on the transmitter.
  2. Plug the BY-WM3T2-RXD into an iOS device or the BY-WM3T2-RXU into a USB-C device.
  3. Transmitter and receiver will be successfully paired within 10 seconds.
  4. You are ready to record.

Note: Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power wifi antennas, radios, etc.

Features

  • 2.4GHz dual-channel wireless microphone system
  • Ultracompact and portable
  • Comaptible with mobile devices
  • Omnidirection built-in mic for 360° sound pickup
  • Selectable noise cancellation
  • Automatic pairing & plug and play
  • Support charging via receiver’s Type-C port for your device when in use
  • Transmitter’s built-in rechargeable battery provides up to 10-hour runtime

Specifications

Transmission Type 2.4GHz
Polar Pattern Omnidirectional
Frequency Response 20Hz-16kHz
SNR 77 dB
Sensitivity -42 dB
Sampling Rate 48kHz
Bit Depth 16bit
Transmission Range 50m (without obstacle)
RF Output Power 6dbm
TX’s Battery Life 10 hours
Battery Capacity 95mAh
Charging Port USB-C
Dimensions TX: 52×17.5×15.6 mm

RXU/RXD: 46×26.2×9 mm
Weight| TX: 8.5g (0.30 oz)
RXU/RXD: 5g (0.18 oz)

Packing List

BY-WM3T2-U1

  • BY-WM3T2-TX transmitter x1
  • BY-WM3T2-RXU receiver x1
  • USB-C charging cable x1
  • Foam windscreen x1

BY-WM3T2-D1

  • BY-WM3T2-TX transmitter x1
  • BY-WM3T2-RXD receiver x1
  • USB-C charging cable x1
  • Foam windscreen x1

BY-WM3T2-U2

  • BY-WM3T2-TX transmitter x2
  • BY-WM3T2-RXU receiver x1
  • USB-C charging cable x2
  • Foam windscreen x2

BY-WM3T2-D2

  • BY-WM3T2-TX transmitter x2
  • BY-WM3T2-RXD receiver x1
  • USB-C charging cable x2
  • Foam windscreen x2

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd. RIM rh -KSM;S-g,h 13Riz_; ittir-ii333±1111-hfi :fheiZNICI-EbtrElliZW4aiit’llMt91z111A16%
TEL: 400 6131096 Email. sales@boya-mic.com
www.boya-mic.com
www.jiayz.com

BOYA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals