KOZYARD KZEPT8000GR Outdoor Fire Pit Table Instruction Manual

: June 17, 2024
: KOZYARD

Table of Contents

Assembly Instructions
Care and warranty
Part list
Part
Img
Description
Qty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**KOZYARD KZEPT8000GR Outdoor Fire Pit Table Instruction Manual

**

Assembly Instructions

Prior to assembly, ensure that you lay out and identify all the parts listed in the parts list.
Tighten all nuts and bolts securely. Hand-tighten all bolts before use. Avoid using power tools or applying excessive force during assembly and bolt tightening.
If you encounter any difficulties during assembly or if any part is missing or damaged, please don’t hesitate to contact our customer service team via email at info@kozyard.com or by calling our toll-free number at 866-355-0018.

Care and warranty

We recommend the use of furniture covers to protect the patio fire pit when not in use.
Clean the frame components and fabric with a mild soap solution, then rinse thoroughly. Avoid using bleach, acid, or any other solvents on either the fabric or frame components.
To prolong the life and beauty of your patio fire pit table, we recommend storing it in a dry and protective area during off-season periods.
For a comprehensive warranty policy, please visit www.kozyard.com. Be aware that warranty terms can change without prior notification.
For the best performance and safety of your chair, inspect and tighten all bolts and fasteners regularly

Part list

Part| Img| Description| Qty
A| | Table Top| 1PC
B| | Right Side Panel| 1PC
C| | Left Side Panel| 1PC
D| | Rear Panel| 1PC
E| | Gas Cylinder Base| 1PC
F| | Door| 1PC
G| | Sti ener Panel| 1PC
H| | Bracket| 2PCS
I| | Caster| 1PC
J| | Burner| 1PC
K| | Burner Lid| 1PC
L| | Pull Ring| 2PCS

Part list

Part

|

Img

|

Description

|

Qty

M| **| Bolt M4*6| 2PCS
N| | Washer M4| 2PCS
O| ****| Bolt M6*15| 16PCS
P| | Bolt M635| 4PCS
Q| | Bolt M640| 6PCS
R| | Washer M6| 22PCS
S| | Allen wrench| 1PC
T| | Knob| 1PC
U| | Glass Stones| 6 KGS
V| | Cover| 1PC
Extra**

Step 1: Screw caster (I) to gas cylinder base (E).

I

x1

Step 2: Attach gas cylinder base (E) to door (F) using bolts (Q) and washers (R). Install the knob (T).

NOTE: Please do not fully tighten bolts until unit is fully assembled.

E x1

F x1

T x1

Q x2

R x2

Step 3: Attach brackets (H) to gas cylinder base (E) and door (F) using bolts (O) and washers (R).

NOTE: Please fully tighten all bolts at this time.

H x 2

O x 4

R x 4

Step 4: Attach right side panel (B) and left side panel (C) to table top (A) using bolts (O) and washers **(R).

**

A x1

B x1

C x1

O x4

R x4

Step 5: Attach rear panel (D) to right side panel (B) and left side panel (C) using bolts (Q) and washers (R).

NOTE: Please do not fully tighten bolts until unit is fully assembled.

D x1

Q x4

R x4

Step 7: Attach burner (J) to table top (A) using bolts (O). And attach control panel to left side panel (C) using bolts (O) and washers (R).

NOTE: Please fully tighten all bolts at this time.

J

O x8

R x4

Step 8: Insert Door and Gas Cylinder Base (E&F) into the guide rail and push it to the end.

NOTE: Please pour the glass stones (U) into the burner at the this time and place them evenly.

Step 9: Attach pull ring (L) to burner lid (K) using bolts (M) and washers (N).

K x1

L x2

M x2

N x2

S x1

Note: We recommend the use of furniture covers to protect the patio fire pit when not in use. Please remove the wind guard before you use waterproof table cover.

SUPPORT: Toll free: 1-866-355-0018 www.kozyard.com email: support@kozyard.com
SOCIAL MEDIA: Follow us on Instagram www.instagram.com/kozyard Upload a picture of your Kozyard product in your home with the hashtag #kozyard share with your friends.