SYLVANIA LED13T8L48FGDIM SUBG9 LED T8 Lamp Instruction Manual

: June 4, 2024
: SYLVANIA

Table of Contents

SYLVANIA LED13T8L48FGDIM SUBG9 LED T8 Lamp
Benefits and Features
Wattage Comparison
Installation
Specification Data
Ordering Guide
- Ordering Information
Specifications & Lighting Data
Physical Information
Application Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SYLVANIA LED13T8L48FGDIM SUBG9 LED T8 Lamp

SYLVANIA-LED13T8L48FGDIM-SUBG9-LED-T8-Lamp-

SubstiTUBE® IPS LED T8
Compatible LED T8 for use with instant start and select programmed rapid start electronic T8 ballasts

SubstiTUBE IPS LED T8 lamps are an energy saving alternative, designed to replace traditional fluorescent T8 lamps. These LED T8 lamps contain no mercury, and provide instant light and a uniform light distribution. Engineered to operate on existing instant start and select program rapid start electronic T8 ballasts, these lamps minimize labor and recycling costs.

Benefits and Features

The SubstiTUBE IPS LED T8 is not affected by switching cycles, occupancy or vacancy sensors, and thus can be installed with the existing instant start ballasts for optimal energy savings
NSF Listed: NSF/ANSI Standard 2 – Food Equipment
No warm-up time, instant-on with full light output and stable lamp to lamp color
DLC listed allows for rebates in areas where applicable saving on overall project cost
No UV emission
Suitable for dry and damp locations (cannot come in direct contact with water)
Maximize energy savings with occupancy sensors
Suitable for open and enclosed fixtures
Glass lamps are suitable for use with tube guards
Up to 178 LPW (Lamp efficacy)
3000K, 3500K, 4100K, 5000K color temperatures
CRI: 82
Available beam angle: 220° and Light Emitting Angle 340°
Electrical
Compatible with instant start and select programmed rapid start electronic T8 ballasts with input voltage of 120-277V and 347V
Dimmable down to 10% with compatible 0-10V ballast
(4ft 13W, 12W and 9W; 3ft 10W (G9); and 2ft 8W (G9) only) — Power factor >0.90
THD <10% (or <20% for G8 & G7)
Rated Life
50,000 hours (L70)
Ambient Operating Range
4°F to 113°F (-20°C to 45°C)

Wattage Comparison

| ****

System Power 1

| Traditional System Power FO32T8 (with QHE2x32 ISN)| ****

Energy Savings/ Year 2

---|---|---|---
LED13T8L48FGDIM SUBG9 | 32W | 55W | 42%
LED12T8L48FGPDIMSUBG9 | 29W | 55W | 47%
LED10T8L48FG SUBG9 | 26W | 55W | 53%
LED9T8L48FGPDIMSUBG9 | 24W | 55W | 56%

With QHE2x32 ISN
24 hours a day

Warranty

5 year limited lamp warranty (24/7 operation)
NLB Trusted Warranty Program
Install a new QHE instant start ballast with the SubstiTUBE IPS LED T8 lamp for optimal performance and to take advantage of the QUICK 72SUB+ system warranty. (See website for details.)

Certifications and Listings— cULus 1993

ETL
RoHS
Lead Free
Mercury Free— FCC*
NSF
DLC Standard
*FCC Title 47 CFR, Part 18, Non-Consumer

Installation

Please refer to the Installation manual included inside the packaging and the application information listed below for more information. (G13 medium bi-pin base)

Specification Data

Catalog #	Type
Project

Comments
Prepared by

Ordering Guide

LED| XX| T8| LXX| FG| DIM| 8| XX| SUB| GX
---|---|---|---|---|---|---|---|---|---
LED| Wattage

13 = 13 Watts

12 = 12 Watts

10 = 10 Watts

9 = 9 Watts

8 = 8 Watts

| Lamp Type T8| Length

48″, 36″, 24″

| FG = Frosted Glass| DIM =

Dimmable

| CRI

8 = 82

| Color Temperature 30 = 3000K

35 = 3500K

41 = 4100K

50 = 5000K

| SubstiTUBE® IPS| Generation 9

Generation 8

Generation 7

Ordering Information

Item Number

| ****

Ordering Abbreviation

| ****

Length

| ****

Lens Material

| ****

Power (W) 1

| ****

Lamp Efficacy

| Typical Lumens (lm) 1| ****

CCT

| ****

CRI

| ****

Life (L 70 ) Hours

| Beam Angle (°)| ****

Case Qty

| ****

DLC

Listed

---|---|---|---|---|---|---|---|---|---|---|---|---
40691| LED13T8L48FGDIM830SUBG9| 4ft| Glass| 13| 154| 2000| 3000K| 82| 50,000| 220| 25| Yes
40692| LED13T8L48FGDIM835SUBG9| 4ft| Glass| 13| 154| 2000| 3500K| 82| 50,000| 220| 25| Yes
40693| LED13T8L48FGDIM841SUBG9| 4ft| Glass| 13| 162| 2100| 4100K| 82| 50,000| 220| 25| Yes
40694| LED13T8L48FGDIM850SUBG9| 4ft| Glass| 13| 162| 2100| 5000K| 82| 50,000| 220| 25| Yes
41274| LED12T8L48FGDIM830SUBG9| 4ft| Frosted Glass| 12| 167| 2000| 3000K| 82| 50,000| 220| 25| Yes
41275| LED12T8L48FGDIM835SUBG9| 4ft| Frosted Glass| 12| 167| 2000| 3500K| 82| 50,000| 220| 25| Yes
41276| LED12T8L48FGDIM841SUBG9| 4ft| Frosted Glass| 12| 175| 2100| 4100K| 82| 50,000| 220| 25| Yes
41277| LED12T8L48FGDIM850SUBG9| 4ft| Frosted Glass| 12| 175| 2100| 5000K| 82| 50,000| 220| 25| Yes
40695| LED10T8L48FG830SUBG9| 4ft| Glass| 10| 160| 1600| 3000K| 82| 50,000| 220| 25| Yes
40696| LED10T8L48FG835SUBG9| 4ft| Glass| 10| 160| 1600| 3500K| 82| 50,000| 220| 25| Yes
40697| LED10T8L48FG841SUBG9| 4ft| Glass| 10| 160| 1600| 4100K| 82| 50,000| 220| 25| Yes
40698| LED10T8L48FG850SUBG9| 4ft| Glass| 10| 160| 1600| 5000K| 82| 50,000| 220| 25| Yes
40995| LED10T8L36FG830SUBG9| 3ft| Glass| 10| 145| 1450| 3000K| 82| 50,000| 220| 25| Yes
40996| LED10T8L36FG835SUBG9| 3ft| Glass| 10| 145| 1450| 3500K| 82| 50,000| 220| 25| Yes
40997| LED10T8L36FG841SUBG9| 3ft| Glass| 10| 145| 1450| 4100K| 82| 50,000| 220| 25| Yes
40998| LED10T8L36FG850SUBG9| 3ft| Glass| 10| 145| 1450| 5000K| 82| 50,000| 220| 25| Yes
41270| LED9T8L48FGDIM830SUBG9| 4ft| Frosted Glass| 9| 178| 1600| 3000K| 82| 50,000| 220| 25| Yes
41271| LED9T8L48FGDIM835SUBG9| 4ft| Frosted Glass| 9| 178| 1600| 3500K| 82| 50,000| 220| 25| Yes
41272| LED9T8L48FGDIM841SUBG9| 4ft| Frosted Glass| 9| 178| 1600| 4100K| 82| 50,000| 220| 25| Yes
41273| LED9T8L48FGDIM850SUBG9| 4ft| Frosted Glass| 9| 178| 1600| 5000K| 82| 50,000| 220| 25| Yes
40991| LED8T8L24FG830SUBG9| 2ft| Glass| 8| 156| 1250| 3000K| 82| 50,000| 220| 25| Yes
40992| LED8T8L24FG835SUBG9| 2ft| Glass| 8| 156| 1250| 3500K| 82| 50,000| 220| 25| Yes
40993| LED8T8L24FG841SUBG9| 2ft| Glass| 8| 156| 1250| 4100K| 82| 50,000| 220| 25| Yes
40994| LED8T8L24FG850SUBG9| 2ft| Glass| 8| 156| 1250| 5000K| 82| 50,000| 220| 25| Yes
75508| LED13T8L48DIM830SUBG8| 4ft| Glass| 13| 154| 2000| 3000K| 82| 50,000| 220| 25| Yes
75510| LED13T8L48DIM841SUBG8| 4ft| Glass| 13| 162| 2100| 4100K| 82| 50,000| 220| 25| Yes
75511| LED13T8L48DIM850SUBG8| 4ft| Glass| 13| 162| 2100| 5000K| 82| 50,000| 220| 25| Yes
79547| LED10T8L48FG850SUBG7| 4ft| Glass| 10| 160| 1600| 5000K| 82| 50,000| 220| 10| Yes
75516| LED10T8L36FG830SUBG7| 3ft| Glass| 10| 145| 1450| 3000K| 82| 50,000| 220| 10| Yes
75519| LED10T8L36FG850SUBG7| 3ft| Glass| 10| 145| 1450| 5000K| 82| 50,000| 220| 10| Yes
75520| LED8T8L24FG830SUBG7| 2ft| Glass| 8| 150| 1200| 3000K| 82| 50,000| 220| 10| Yes
75521| LED8T8L24FG835SUBG7| 2ft| Glass| 8| 150| 1200| 3500K| 82| 50,000| 220| 10| Yes

Average Lamp Power and Average Lamp Lumens rated on QHE2x32T8/UNV ISN.
Items will be discontinued when stock is depleted.

Specifications & Lighting Data

Lamp

| ****

Ballast

No of Lamps

---|---|---|---|---|---|---
LED13T8/L48/FG/DIM| QHE 2X32T8/UNV ISN| 0.26/0.12| 32| 4200| 130| 2
LED12T8L48FGPDIM| QHE 2X32T8/UNV ISN| 0.24/0.10| 29| 4200| 140+| 2
LED10T8/L48/FG| QHE 2X32T8/UNV ISN| 0.22/0.10| 26| 3200| 123| 2
LED9T8L48FGPDIM| QHE 2X32T8/UNV ISN| 0.20/0.09| 24| 3200| 133+| 2
LED10T8/L36| QHE2X32T8/UNV/ISN| 0.20/0.09| 24| 2900| 120| 2
LED8T8/L24| QHE2X32T8/UNV/ISN| 0.17/0.08| 20| 2400| 120| 2

Physical Information

SYLVANIA-LED13T8L48FGDIM-SUBG9-LED-T8-Lamp-
fig-1

Lamp Description

| L1

End of Base Pin to

End of Opposite Pin End

| L2

Base Face to Opposite Base Pin

| L3

Base Face to Base Face

| L4

Bulb Outside Diameter

---|---|---|---|---
LED13T8/L48 LED12T8/L48 LED10T8/L48 LED9T8L/48|

47.725″ ± 0.055″ (1212.2mm ± 1.4mm)

|

47.45″ ± 0.05″ (1205.25mm ± 1.25mm)

|

max 47.22″ (1199.4mm)

|

1.02″ ± 0.08″ (25.9mm ± 2.0mm)

Application Information

Due to numerous ballast designs and topologies, this lamp should be tested on existing ballasts before mass quantities are installed.
Not intended for use with older dedicated voltage (120V or 277V) ballasts. These ballasts have electronic components that degrade over time and may become unsuitable for the new LED T8 lamp.
All installation, inspection, and maintenance of lighting fixtures should be done with the power to the fixture turned off. Lamps should be installed and operated in compliance with the National Electrical Code (NEC), Underwriters Laboratories Inc. (UL) requirements, and all applicable codes and regulations.
Insert and align tubes properly in lamp holders. Partial insertion results in a poor or intermittent electrical contact that can result in short lamp life and arcing. Arcing at the lamp holder can result in localized overheating.
For instant start ballasts, use lamp holders with an internal shunt or ensure that lamp holder are wired in a shunt configuration.
For Programmed Rapid Start ballasts, use rapid-start lamp holders (non-shunted lamp holders).
De-lamp is not allowed for ISH ballasts. For approved ISN and ISL ballasts, de-lamp is allowed for only 1 lamp so long as the ballast factor remains below 1.20 (for example, 4 lamp ballast can de-lamp to 3 lamps).
Suitable for use in dry and damp environments.
The maximum mounting distance between tube and ballast is 20 feet.
Not for use with other LED or fluorescent lamps on the same ballast.
Not for use with magnetic ballasts.
Max case temperature: 158°F (70°C) for LED13/L48/G9, LED12L48G9, LED10/L48/G9 or LED9L48G9; 167°F (75°C) for LED13T8/L48/G8; 149°F (65°C) for LED10T8/L48/G7; 136°F (58°C) for LED10T8/L36/G7 or LED8/L24/G7
Please read all installation instructions before attempting installation.
For detailed warranty information, please see www.ledvanceUS.com.

LEDVANCE LLC
200 Ballardvale Street
Wilmington, MA 01887 USA
Phone 1-800-LIGHTBULB (1-800-544-4828) www.ledvanceUS.com
SYLVANIA and LEDVANCE are registered trademarks.
All other trademarks are those of their respective owners. Licensee of product trademark SYLVANIA in general lighting. Specifications are subject to change without notice.