Bushnell 202450 Bluetooth Enabled Golf GPS Rangefinder User Guide
- June 1, 2024
- Bushnell
Table of Contents
Bushnell 202450 Bluetooth Enabled Golf GPS Rangefinder
Specifications
- Model: 202450 rev 02-24
- Type: Bluetooth Enabled Golf GPS Rangefinder
- Features: Slope Switch, Dual Display, Wind Feature, BITE Magnet
Product Usage Instructions
Getting Started:
Scan the code to download the Bushnell Golf Mobile app and register your ProX3+ Laser Rangefinder.
Slope Switch:
To enable/disable Slope mode:
- Use your right thumb to pull down the side latch.
- With your other hand, pull back the switch on both sides to enable Slope On or slide forward to turn Slope off.
Basic Operation/Controls:
- Remove protective disc from the battery compartment.
- Press Fire/Power button to activate the display and fire the laser.
- Adjust the eyepiece focus by rotating the Diopter Dial.
- Press and hold Mode button to enter Settings and modify various options.
- In Slope Mode, toggle between Play As and Element Compensation Modes by pressing the Mode button.
- Switch between red and black displays using the Dual Display button.
Display Guide:
The display includes information such as Aiming Circle, Headwind/Tailwind Speed, Crosswind Speed, Line of Sight Distance, Slope (% grade), Bluetooth Connection status, Battery Level, and more.
Using Wind Feature:
- Enter Settings by pressing and holding the mode button.
- Turn on Wind feature in the settings menu.
- Ensure the device is paired with the Bushnell Golf mobile app and Slope is enabled.
BITE Magnet:
The powerful BITE magnet on the ProX3+ allows secure attachment to a golf cart bar or frame. Calibrate the digital compass when needed for accurate readings.
FAQ
Q: How do I calibrate the digital compass on the ProX3+?
A: Calibrate the digital compass when there is a significant change in the surrounding magnetic field. Follow the calibration instructions in the user manual or contact support for assistance.
Q: Can I use the BITE magnet with the wind function simultaneously?
A: Yes, you can use the BITE magnet with the wind function, but it may require more frequent calibrations to ensure accurate readings.
Model# 202450 rev 02-24
Bluetooth Enabled Golf GPS Rangefinder
Scan the code to download the Bushnell Golf Mobile app and register your ProX3+ Laser Rangefinder.
Android and Google Play are registered trademarks of Google Inc. in the United States and other countries. iPhone and Apple Store are trademarks of Apple Inc., registered in the U.S. and other countries. Other names may be trademarks of their respective owners.
Basic Operation/Controls
- Remove protective disc from battery compartment.
- Press Fire/Power button to activate display and fire laser.
- Rotate the Diopter Dial, to adjust the eyepiece focus.
- Press and hold Mode button to enter Settings. Press the Mode button to select and modify: display brightness (red display only), Yards/Meters, Wind on/off, Bluetooth on/off, and Home Elevation.
- Press Fire/Power Button, while in Settings to advance to the next screen.
- While in Slope Mode, press and release the Mode button to toggle between Play As and Element Compensation Modes.
- Press Dual Display button to switch between red and black displays.
- Slope Switch enables/disables slope mode.
Display Guide
For a full user manual, operating details, product use questions and warranty/repair information, please visit: www.BushnellGolf.com/support
Using Wind Feature
- Press and hold the mode button to enter settings, advance to the Wind on/off menu and turn Wind on.
- Ensure the PRO X3+ is paired and connected to the Bushnell Golf mobile app and the app is open and running on your phone.
- Ensure Slope is enabled on your PRO X3+.
- When connected to and receiving data from the mobile app, The headwind/tailwind and crosswind speeds will be displayed in MPH (or KPH) in the upper Left of your display.
- To change between MPH and KPH, go to your PRO X3+ setting in the mobile app.
- If the internal compass is not calibrated, the directional arrows will flash and the PRO X3+ will vibrate indicating the compass is not calibrated.
- To calibrate the compass, the laser needs to be rotated in various directions.
- Once the compass is calibrated, the wind values and directions will display.
- When the laser has a successful range, the wind values will “lock” in the direction the laser was pointed during ranging until the next attempted range.
Note: The PRO X3+ includes a BITE magnet and a digital compass. Digital compasses need to be calibrated when there is a significant change in the surrounding magnetic field. Use of the BITE magnet with the wind function may necessitate more frequent calibrations.
WARNING: AS WITH ANY LASER DEVICE, IT IS NOT RECCOMENDED TO DIRECTLY VIEW THE EMISSIONS FOR LONG PERIODS OF TIME WITH A MAGNIFIED LENS.
FDA Safety
CLASS 1 LASER PRODUCT EN/IEC 60825-1 2014
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 Ed. 3., as described in Laser Notice 56, dated May 8, 2019.
Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those specified herein may result in access to invisible laser light.
- This product contains no user serviceable controls.
- This product must not be opened or modified by the consumer.
- This product must be returned to the manufacturer for service.
- Device specifications and design are subject to change without notice or obligation on the part of the manufacturer.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device does not contain any user-serviceable parts. Repairs should only be made by an Authorized Bushnell Repair center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and will void warranty and your authority to operate the device under Part 15 regulations. Specifications and design are subject to change without any notice or obligation on the part of the manufacturer.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Disposal of Electric and Electronic Equipment
(Applic able in the EU and other European countries with separate collection
systems)
This equipment contains electric and/or electronic parts and must therefore
not be disposed of as normal household waste. Instead, it should be disposed
at the respective collection points for recycling provided by the communities.
For you, this is free of charge. If the equipment contains exchangeable
(rechargeable) batteries, these too must be removed before and, if necessary,
in turn be disposed of according to the relevant regulations (see also the
respective comments in this unit’s instructions). Further information about
the subject is available at your community administration, your local waste
collection company, or in the store where you purchased this equipment.
Industry Canada Statement
This device complies with ISED’s license-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
This device complies with the Industry Canada portable RF exposure limit set
forth for an uncontrolled environment and is safe for the intended operation
as described in this manual. Further RF exposure reduction can be achieved if
the product can be kept as far as possible from the user’s body or if the
device is set to a lower output power if such function is available.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Additional International Support Resources
- Australia…………………………………………………………………………………………[email protected]
- Western Europe:
- United Kingdom, Germany, France, Spain, Italy, Netherlands, Belgium, Luxembourg………[email protected]
- Scandinavia: Sweden, Norway, Denmark, Iceland, Finland……………………………………………[email protected]
- India…………………………………………………………………………………….[email protected]
- Morocco………………………………………………………………………………………………………..[email protected]
- Poland…………………………………………………………………………………………………………..[email protected]
- South Africa………………………………………………………………………………………………………[email protected]
- Switzerland…………………………………………………………………………………………………………[email protected]
- United Arab Emirates………………………………………………………………………………………..[email protected]
Customer Service: 800-423-3537
www.bushnellgolf.com
US Pat # http://patents.vistaoutdoor.com
©2024 Bushnell Outdoor Products