EKO KPS08PM 8 Inch Portable Party Speaker Instruction Manual
- June 9, 2024
- EKO
Table of Contents
8” PARTY SPEAKER
KPS08PM
INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future
reference.
KPS08PM 8 Inch Portable Party Speaker
CUSTOMER SUPPORT
For all product related enquiries or technical questions please use the
following to get in touch:
02 8279 8606 help@eko-entertainment.com.au
www.eko-entertainment.com.au or by
scanning the QR Code.
GENERAL SAFETY
Read this manual thoroughly before you start using the Speaker.
Store this manual, the completed warranty card, your receipt and the product
packaging.
The safety precautions instructions reduces the risk of fire, electric shock
and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
IMPORTANT INFORMATION
- Ensure the Product is not overhanging the edge of the supporting furniture.
- Do not place the product on a high furniture without securing both the furniture and the product to a stable support.
- Do not place the product on cloth or other conductive materials.
- Warn children of the dangers of climbing on furniture to reach the product or its controls and to call for an adult to assist.
IMPORTANT INFORMATION
- Do not expose this product to rain or moisture as it may result in fire or an electric shock hazard
- Do not tamper or change or modify the product in any way.
- Only use Accessories outlined and recommended by the manufacturer.
- Please do not expose the product to splashing or water contact
- Please do not place any object on top of the product
- Please Be sure to charge while music distorted.
This product must be positioned in a sufficiently stable location, it can be potentially hazardous due to falling when mounted and can cause injury, particularly to children if it positioned incorrectly.
-
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product.
-
No naked flame source, such as candles, should be placed on the product.
-
Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains etc or insert objects into the slots available on the products.
As this could result in the product temperature rising and could cause a fire. -
If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.
-
Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire.
-
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
-
To maintain the product do not use any chemical or cleaning agent or wet cloth, please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.
-
Please ensure to contact our call center for any repair or service required for the products.
Please make sure upon positioning this product, the place is:
- Not wet or damp and Well ventilated
- Away from direct sunlight or heaters.
- Away from splashes or food.
- Protected from excessive dust or grease.
- Do not place this equipment in a confined space such as a bookcase or similar unit. Allow 20cm above and 5cm spacing on both sides for proper ventilation.
- Do not place the Product near heat sources such as radiators, stoves or other audio visual equipment that produce heat.
- Do not place containers with liquids, if liquid falls inside the products it may result in short-circuit, fire or electric shock.
- Do not place small metallic objects on top of the unit.
- Do not use or store flammable or combustible materials near the unit. Doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes or incense sticks on top of the product.
PRODUCT OVERVIEW
PRODUCT OVERVIEW – Remote Control
- Power Button: Short press it to enter standby mode; short press it again to resume. If no device is connected, the system goes to “BT”.
- : Functions as “ ” on the device.
- : Functions as “ ” on the device.
- : Functions as “ ” on the device.
- Mode: Functions as “Mode” on the device.
- Cycle key: In USB/TF card reading status, short press it to toggle among four playback sequencing modes (All – play all tracks in sequence; RAND – play in random; ONE – repeat one track; FOL – repeat all tracks in a folder).
- SCAN: In FM receiving status, long press it to execute a full search (it is recommended to execute at least one full search before using radio receiving function. All founded stations will be saved even in power-off).
- EQ: In USB/TF/AUX/Bluetooth reading status short press it to select an environment mode (from NOR, POP,ROC,JAZ,CLA,CUT).
- : In USB/TF/FM/AUX/Bluetooth mode, short press it to mute the device.
- When there is no radio station, press this key to adjust the Previous frequency point, and when there is a radio station, press this key to adjust the Previous radio station.
- When there is no radio station, press this key to adjust the next frequency point, and when there is a radio station, press this key to adjust the next radio station.
- VOL+/VOL- Keys: In USB/TF/FM/AUX/Bluetooth mode, press them to volume up/down.
- Numeric Keys 0~9: In USB/TF card reading status, to play Track 12, just input numbers “1” and “2”, and in 2 seconds the system will go to Track 12 and start playback. Any input of number larger than number of the total available tracks is invalid. In FM status, to listen to channel 107.5MHZ, just input “1075”.
BASIC OPERATION
BLUETOOTH PAIRING OPERATION AND RELATED PARAMETERS
- POWER: Switch the power to ON, press the key “MODE” to enter the mode of Bluetooth, the display screen will show “BLUE”.
- Switch on the Bluetooth function of Mobile phone and searching , while the Mobile phone shows “KPS08PM”, click the connect directly. mobile phone connection do not need password , if need password , please input”0000” to go on pairing . After success pairing , the speaker will send out a voice of prompt . it is success pairing between mobile phone and Bluetooth speaker.
- Play the music of your mobile bphone directly and will give out beautiful voice from speaker.
Recording
Recording via External Microphone: Connect a storage device (USB/TF card)
and short press RECORD key to start recording for a time depending on the
storage capacity. During recording, tune the “-ECHO+” knob to the minimum. It
is noticeable that the microphone should be located a proper distance away
from the speaker to prevent any howl-round or noise.
Notes: This product starts recording from the time as displayed on the
LED screen.
SPECIFICATIONS
Ratings | 5VDC 2A |
---|---|
Lithium Battery | 7.4Vdc 3000mAh |
Speaker Size | 1 x 8” |
Dimensions | 260 (w) x 280 (d) x 355 (h) mm |
Charging time | 4 – 5h |
Playing time | 2 – 3h |
CUSTOMER SUPPORT:
help@eko-entertainment.com.au
DISTRIBUTED BY:
Ayonz Pty Ltd
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>