KOZYARD KZSW3207B Ailsa 1 person Beige Iron Outdoor Swing Bed Instruction Manual

Table of Contents

Weight Limit: 350lbs
Material: Steel
Includes: Swing chair, seat cushion, pillow, steel chain, magazine bag, canopy roof, bolts, wrench, Allen key

Warning: Please read the following warnings before using the swing chair:

Before assembly, ensure that you lay out and identify all the parts listed in the parts list.
Tighten all nuts and bolts securely. Hand-tighten all bolts before use. Avoid using power tools or applying excessive force during assembly and bolt tightening.
Install at a minimum distance of 6 feet from any obstructions, such as fences, garages, houses, overhanging branches, laundry lines, or electrical wires.
It is recommended to be at least 2 people for a safe assembly of the product.
If you encounter any difficulties during assembly or if any part is missing or damaged, please don’t hesitate to contact our customer service team via email at info@kozyard.com or by calling our toll-free number at 866-355-0018.

The weight capacity of this swing chair is 350 lbs.
Clean the frame components and fabric with a mild soap solution, then rinse thoroughly. Avoid using bleach, acid, or any other solvents on either the fabric or frame components.
For a comprehensive warranty policy, please visit www.kozyard.com. Be aware that warranty terms can change without prior notification.
For the best performance and safety of your chair, inspect and tighten all bolts and fasteners regularly

Warning

Step 1: First, connect the leg tubes (part A) and (part B) together using bolt M, as shown in the diagram. Then, pull the magazine bag (part L) onto the crossbar (part C), as shown in the diagram.
Step 2: Connect part F and part D to the leg tube (part A + B) using bolt O, as shown in the diagram. Affix part C to the legs using bolt O, as shown in the diagram.
Step 3: Affix leg caps (part I) as shown in the diagram.
Step 4: Attach the Support cross tube (Part E) to the seat cushion, then connect the hook (Part G) and steel chain (Part H) to the cushion, and finally, secure the pillow (Part K) onto the hook (Part G) as indicated in the diagram.
Step 5: Hang part H into the hook on the main frame as shown in the diagram.
Step 6 : Insert canopy roof part S into part T as shown in the diagram.
Step 7: Connect Part U to Part T to build the roof frame as shown in the diagram.
Step 8: Connect Part R to Part T using bolt Q as shown in the diagram. Affix the roof canopy frame to the main frame (Part D) using bolt N and bolt P as shown in the diagram.
Step 9: Before using, make sure to check that all screws are securely tightened.

Toll free: 866-355-0018
www.kozyard.com
email: support@kozyard.com

SOCIAL MEDIA:
Follow us on Instagram: www.instagram.com/kozyard

What is the weight limit of the swing chair?
- The weight limit of the swing chair is 350 lbs.
Can I stand or kneel on the swing chair?
- No, it is not recommended to stand or kneel on the swing chair for safety reasons.
Should I remove the cushion when it’s raining?
- Yes, it is advised to put away the cushion when it’s raining or snowing to protect it from damage.
How do I clean the swing chair?****
- You can clean the swing chair with mild soap and water. Avoid using harsh chemicals or abrasive materials that may damage the surface.
  If you have any further questions or concerns, please contact Kozyard LLC at 866-355-0018.