PERLEGEAR PGTVS22 Table Top TV Stand Instruction Manual
- June 16, 2024
- Perlegear
Table of Contents
PERLEGEAR PGTVS22 Table Top TV Stand
Before getting started, let’s make sure this stand is perfect for you.
1 Is your TV VESA less than or equal to 400 x 400mm I 15.7 x 15.7″ or greater than or equal to 100 x 100mm / 3.9 x 3.9″?
|
2 Does your TV (including accessories) weigh less than 88 lbs (40 kg)?
| 
3 Tool Needed (NOT Included)
|
4 Important Safety Information
|
NOTES
· Please carefully read all instructions before attempting installation. If you DO NOT understand the instructions or have any concerns or questions, please contact our customer service at
· Not all hardware included in this package will be used.
CAUTION
· Avoid potential personal injuries and property damage!
· DO NOT use this product for any purpose that is NOT explicitly specified in this manual. DO NOT exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
· Before starting assembly, verify all parts are included and undam aged. DO NOT use damaged or defective parts. If you require replacement parts, contact our customer service at
WARNING
· This product contains small items that could be a choking hazard if swallowed.
CONTENTS
PARTS
STEP 1 Attach TV Brackets to TV
- Select TV Bolts
- Hand thread bolts into the threaded inserts on the back of your TV to determine which bolt (M4, M6 or M8) to use.
Spacers Needed if You Have a TV as Shown Below
- Flat Back TV (See Option A)
- Curved TV (See Option B)
- Bump (See Option C)
- Cables (See Option D)
- Recessed Holes (See Option E)
INSTALLATION INSTRUCTIONS
Attach the TV Brackets to Your TV
Option A
- Option A: For Flat-Back TVs Add proper spacers according to your needs
Option B
- Option B: For Curved-Back TVs, Spacers must be tall enough so that the curved back of the TV does not interfere with the mounting plate.
Option C
- Option C: For TVs with a Bump
- The TV brackets must be flush on the bump and levelled by spacers on the gap.
Option D
- Option D: For TVs with Protruding Cables
- I For protruding cables, use spacers [F1], [F2] or [F3] to create extra space between the TV and TV brackets.
Option E
- Option E: For TVs with Recessed Holes
- Spacers [F1], [F2] or [F3] need to fill in the recessed holes on the back of the TV while keeping the TV brackets as close to the TV as possible.
STEP 2 Attach the Base Legs to the Brackets
CONTACT
- (US / CA) 1-800-456-5231
- (UK) 44-808-196-4165
- support@perlegear.com
- supportjp@perlegear.com (JP)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>