Perlegear PGTVS27 Universal Swivel TV Stand with Power Outlet Instruction Manual
- June 15, 2024
- Perlegear
Table of Contents
Perlegear PGTVS27 Universal Swivel TV Stand with Power Outlet
Product Information
Specifications
- VESA Pattern: 100 x 100mm (3.9 x 3.9) to 400 x 400mm (15.7 x 15.7)
- Maximum Weight Capacity: 88 lbs (40 kg)
- Tools Needed (NOT Included): Phillips Screwdriver
Before getting started, let’s make sure this stand is compatible
Contents
INSTALLATION
1-1 Select TV Bolts
Hand thread bolts into the threaded inserts on the back of your TV to determine which bolt (M4, M6 or M8) to use. A minimum of 4-5 turns into the threading is required. Do not turn past the bottom of the hole.
1-2 Spacer and Bolt Configurations
1-3 Attach the TV Brackets to Your TV
Option A
Option B
Option B: For Curved TVs Spacers must be tall enough so that the curved back of the TV does not interfere with the mounting plate.
Option C
Option C: For TVs with a Bump The TV brackets must be flush on the bump and leveled by spacers on the gap.
Option D
Option D: For TVs with Protruding Cables Use spacers [TV8], [TV9] or [TV10] to create extra space between the TV and TV brackets.
Option E
Option E: For TVs with Recessed Holes Spacers [TV8], [TV9] or [TV10] need to fill in the recessed holes on the back of the TV, while keeping the TV brackets as close to the TV as possible.
Step 2 Assemble the Base
Step 3 Connect the TV Plate [05] to Support Pillar [03]
Step 4 Hang TV on the TV Plate
The TV brackets have three sets of hooks. Choose the appropriate hooks before moving on to attach your TV. The #1 hooks will position your TV lower; the #2 hooks will add extra height and the #3 hooks will position your TV the highest
Insert the safety locks [E] into the upward-facing hooks located directly below the horizontal TV plate. Tighten the bolts until the bolts touch the TV plate.
Step 5 Cable Management
Step 6 Adjust the Tilt Angle of the TV
Directly tilt your TV
to the desired angle. If it is difficult to tilt the TV, you can slightly
loosen the tilt bolts [D], then adjust your TV. Retighten the bolts to lock
the tilt angle
Step 7 Swivel Adjustment
The TV can be
swiveled manually. Only swivel the TV by the TV edges. Do not press on the
screen. If the TV is difficult to swivel, remove the TV, and then slightly
loosen the preassembled bolts. Do not overlook. Reattach the TV and swivel.
CONTACT
- (US/CA) 1-800-456-5231
- (UK) 44-808-196-4165
- [email protected]
- www.perlegear.com