PERLEGEAR PGTVS25 TV Stand Mount Instruction Manual
- June 15, 2024
- Perlegear
Table of Contents
PERLEGEAR PGTVS25 TV Stand Mount
Product Information
Specifications
- Model : PGTVS25
- Type : Tabletop TV Stand
- Compatible VESA patterns : 100 x 100mm (3.9 x 3.9) to 400 x 400mm (15.7 x 15.7)
- Weight capacity : Less than 88 lbs (40 kg)
- Tools needed (NOT included) : Phillips Screwdriver, Allen Key 3/16 (5mm), Wrench 1/2 (13mm)
Product Usage Instructions
Step 1: Attach TV Brackets to TV
Select TV Bolts
Hand thread bolts into the threaded inserts on the back of your TV to
determine which bolt (M4, M6, or M8) to use. A minimum of 4-5 turns into the
threading is required. Do not overtighten.
Spacer and Bolt Configurations
Depending on your TV type, choose the appropriate spacer and bolt
configuration:
Option A: For Flat Back TVs
Add spacers if needed to fit the bolt length and TV back.
Option B: For Curved TVs
Spacers must be tall enough so that the curved back of the TV does not
interfere with the TV brackets.
Option C: For TVs with a Bump
The TV brackets must be flush on the bump and leveled by spacers on the
gap.
Option D: For TVs with Protruding Cables
Use spacers to create extra space between the TV and TV brackets.
Option E: For TVs with Recessed Holes
Spacers need to fill in the recessed holes on the back of the TV.
**Step 2: Assemble the Base
**
Attach the foot pads to the frosted side of the tempered glass base in the corners. Leave a small gap between the edge of the glass and the foot pads.
FAQ
-
Q: Is this TV stand compatible with all TVs?
A: No, this TV stand is only compatible with TVs that have VESA patterns ranging from 100 x 100mm to 400 x 400mm and weigh less than 88 lbs (40 kg). -
Q: What tools are needed for assembly?
A: The tools needed for assembly are a Phillips Screwdriver, Allen Key 3/16 (5mm), and Wrench 1/2 (13mm). These tools are not included with the product.
Tabletop TV Stand
Before getting started, let’s make sure this stand is compatible.
**1 Is ****the ****VESA ****pattern of your TV 100 x 100mm (3.9 x 3.9″) to**
400 x 400mm (15.7 x
15.7″) ?
| **Yes – Perfect!**
**No – This stand is NOT compatible.**
**2 Does your TV (including accessories) weigh less than 88 lbs (40
kg) ?| ****Yes – Perfect! ****No -This stand is NOT compatible.
****3 Tools Needed (NOT included)| **
Phillips Screwdriver
**4 Important Safety Information| NOTE**
- Please carefully read all instructions before attempting installation. If you DO NOT understand the instructions or have any questions or concerns, please contact our technical support line at 1-800-456-5231 (US/CA) / 44-808-196-4165 (UK) or customer service at [email protected].
- Not all hardware included in this package will be used.
CAUTION
- Avoid potential injuries and property damage!
- DO NOT use this product for any purpose that is NOT explicitly specified in this manual. DO NOT exceed weight capacity. We are NOT liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
- Before starting assembly, verify all parts are included and undamaged. DO NOT use damaged or defective parts. lf you require replacement parts, please contact our technical support line at 1-800-456-5231 (US/CA) / 44-808-196-4165 (UK) or customer service at [email protected].
WARNING
This package contains small parts that could pose a choking hazard.
Contents
TV Bolts
Attach TV Brackets to TV
Select TV Bolts
Hand thread bolts into the threaded inserts on the back of your TV to
determine which bolt (M4, M6 or M8) to use. A minimum of 4-5 turns into the
threading is required. Do not turn past the bottom of the hole.
Spacer and Bolt Configurations
Attach the TV Brackets to Your TV
Option A
Option A : For Flat Back TVs
EN Add spacers if needed to fit the bolt length and TV back
Option B
Option B : For Curved TVs
Spacers must be tall enough so that the curved back of the TV does not
interfere with the mounting plate.
Option C
Option C : For TVs with a Bump
The TV brackets must be flush on the bump and leveled by spacers on the gap.
Option D
Option D: For TVs with Protruding Cables
Use spacers [TV8], [TV9] or [TV10] to create extra space between the TV and TV
brackets
Option E
Option E: For TVs with Recessed Holes
Spacers [TV8], [TV9] or [TV10] need to fill in the recessed holes on the back
of the TV, while keeping the TV brackets as close to the TV as possible
Assemble the Base
Attach the foot pads [F] to the frosted side of the tempered glass base [02]
in the corners.
TIP : Leave a small gap between the edge of the glass and the foot pads.
Attach the support pillar [03] to tempered glass base [02] using plastic cover [04], plastic washers [C], steel washers [B], bolts [A] and Allen key [H].
Connect the TV Plate [06] to Support Pillar [03]
The support pillar has two height options. Choose the best height position for your TV before moving on to attach the TV plate [05] to the support pillar [03].
Connect the TV plate [05] to the front of the support pillar [03].
Hang TV on the TV Plate
The TV brackets have three sets of hooks. Choose the appropriate hooks
before moving on to attach your TV. The #1 hooks will position your TV lower;
the #2 hooks will add extra height and the #3 hooks will position your TV the
highest
Insert the safety locks [E] into the upward-facing hooks located directly below the horizontal TV plate. Tighten the bolts until the bolts touch the TV plate.
Cable Management
Adjust the Tilt Angle of the TV
Directly tilt your TV to your desired angle. If it is difficult to tilt the
TV, you can slightly loosen the tilt bolts [D], then adjust your TV.
Retighten the bolts to lock the tilt angle.
Swivel Adjustment
The TV can be swiveled manually. Only swivel the TV by the TV edges. Do not
press on the screen.
-
(US/CA) 1- 800-456-5231
(UK) 44-808-196-4165