AVer CAM340 Professional Ultra HD 4K Huddle Room Collaboration USB Cameras User Guide
- June 17, 2024
- AVer
Table of Contents
CAM340 Professional Ultra HD 4K Huddle Room Collaboration USB Cameras
CAM340 Quick Start Guide
Package Contents
Overview
1. Lens
2. Sliding privacy
shutter door
3. IR receiver
4. Status light
5. Microphone
6. Mount clip
7. Kensington slot
8. Tripod screw hole
9. RESET pin
10. Audio to line out
11. USB type‐C connector
12. DC power jack(USB 2.0)
Setup CAM340
1. Install the CAM340 on top of TV or on a tripod.
2. Connect CAM340 to PC with provided USB cable. If you like to use type‐C
connector on newer PC, connect provided adapter to type‐A end of cable,
then connect type‐C side of adapter to PC.
3. If you connect CAM340 to USB2.0 port on PC, status light will blink blue
and PC displays the warning message. Please connect provided power
adapter to CAM340 and wall.
[Note] USB 2.0 warning only stays on for 2 minutes then disappears.
4. Select CAM340 as the camera or video device in your app. If you want to
use CAM340 microphone, please turn on the microphone function
(Default is off) through the AVer PTZApp. Next, select CAM 340 as your
microphone or audio device. For multi‐person conferences, it is
recommended to use an external professional microphone or to use with
the AVer professional speaker microphone device for the best conference
results.
[Note] In AVer PTZApp, please select the USB Data Transfer Mode (Settings) as:
For Mac OS: isochronous mode
For Windows: Bulk mode
Status LED
LED Status
Blinking blue
‐ Power on start‐up usually takes less than 30 seconds
‐ Connecting to PC USB 2.0 port without connecting power adaptor
Solid blue Camera is power on
Amber Not in use
Blinking green Firmware updating
Note:
CAM340 is a Plug‐n‐Play Conference Camera. The system requires no
special drivers. Please visit averusa.com/video‐collaboration for more
information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>