PERLEGEAR PGLF8 Full Motion TV Wall Mount User Manual

June 14, 2024
Perlegear

PGLF8 Full Motion TV Wall Mount
User Manual

FREQUENTLY ASKED QUESTIONS

QUESTION 1 What should I do if my stud spacing is greater than 16⊠ or if I can’t center the mount on the wood studs?
OPTION A: HARDWOOD BOARDS

  1. Buy two hardwood boards long enough to cover the gap between two wood studs and firmly attach them.
  2. Securely attach the TV Wall Mount to the boards.

OPTION B: EXTENSION BRACKET

  1. Attach extension brackets to the TV Wall Mount. If you have any questions about obtaining extension brackets, please contact customer service for more information.

(US/CA) 1-800-456-5231
(UK) 44-808-196-4165
[email protected]

  1. Install the TV Wall Mount in the wood studs using the extension brackets.

QUESTION 2 How do I find the right height for mounting the TV?
The simplest method is to position the TV so that the center is the same height as your eye level while viewing. Scan the QR code to watch the mounting video, which covers this in more detail.

https://youtu.be/7KpOapBWbAU

QUESTION 3 How can I raise/lower the TV if the TV Wall Mount is already fixed on the wall?
NOTE: This answer is only suitable for TVs with VESA pattern measurements smaller than 400mm (16⊠).

  1. Remove the TV from the TV Wall Mount.
  2. Remove the TV brackets from the TV and reattach according to instructions A or Bin the picture below (A for lifting up the TV or B for lowering the TV).
  3. Hang the TV on the TV Wall Mount and secure.

A. Toraise the TV by a few inches, reattach the TV brackets using the upper holes in the brackets.
B. To lower the TV by a few inches, reattach the TV brackets using the lower holes in the brackets. PERLEGEAR PGLF8 Full Motion TV Wall Mount - Wall
MountQUESTION 4 It’s too hard to adjust the swivel angle or extension of the TV Wall Mount.

  1. Mount the TV and Wall Mount on the wall before trying to move the arms. Only move the TV by the left and right edges. Do not push on the screen of the TV.
  2. If you have tried Option 1 but adjustment is still too hard, try lubricating the arm joints with a few drops of machine oil.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Perlegear User Manuals

Related Manuals