OPT7 Tailgate Warning LED Light Bar Instruction Manual

WARNING
LIGHT BAR
INSTALLATION GUIDE
Tailgate

What’s included

INSTALLATION

Example
Recommendation for methods and location HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
– Connect the Red wire (+) of power harness to the vehicle battery’s positive terminal.
– Connect the Black wire (-) of power harness to the vehicle battery’s negative terminal or an unpainted area on your vehicle’s frame.
WARNING

1. Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10AMPs or less!!
2. Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.

IMPORTANT
BE SURE TO CONFIRM THE CORRECT DIRECTION OF THE ARROW!!
TO AVOID PRODUCT DAMAGE DUE TO INCORRECT INSTALLATION. STEP1
Test the Light Bar by attaching the wires to the battery before installing onto the vehicle.
STEP2
The Tailgate Light Bar requires a flat surface for installation.
*Recommend making necessary measurements prior to the installation.
STEP3
Thoroughly clean the area where the LED Bar will be mounted. STEP4
OPTION 1
Apply the Adhesive Booster to the cleaned area.
STEP5

1. Peel the back off of adhesive on each end of the LED bar.
2. When this is all done, hold the LED bar with both hands and apply firmly to the cleaned area.

STEP4
OPTION 2
For optimal installation of the LED Bar, carefully plan and mark the desired bracket mounting locations, taking placement into consideration to ensure a straight application.
STEP5
Securely mount the LED Bar to your vehicle using the provided screws and clips to ensure a solid installation.

HOW TO USE

THE WARNING MODE LIGHTING FUNCTIONS
Press the “A” button to enable the warning light function. You may easily switch between modes using the B,C,D on the RF remote. A Power ON/OFF
B Speed Adjust (5 Speed Option)
C Mode Up (12 Level)
D Mode Down (12 Level)
NOTES

1. When you use this product, keep it within 10m/33ft as much as possible.
2. When the warning light is turned on, the vehicle signals reception will be temporarily disabled. It won’t be restored until you turn it off.

DISCLAIMER

OPT7 Lighting is not liable for damages, injuries, or death while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.
1 YEAR WARRANTY

Documents / Resources

| OPT7 Tailgate Warning LED Light Bar [pdf] Instruction Manual
Tailgate Warning LED Light Bar, Tailgate, Warning LED Light Bar, LED Light Bar, Light Bar, Bar
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>