Generic One color Bluetooth Wireless Earbuds User Manual
- June 3, 2024
- Generic
Table of Contents
Generic One color Bluetooth Wireless Earbuds
Specification
- BRAND: Generic
- COLOR: One-color
- FORM FACTOR: In Ear
- CONNECTIVITY TECHNOLOGY: Wireless
- AGE RANGE (DESCRIPTION): Adult
- ITEM WEIGHT: 035 ounces
- BLUETOOTH: 0
- WATERPROOF RATING: IPX5
Introduction
Most Bluetooth devices are supported by Bluetooth V5.0. More music time is provided by the charging box’s ability to fully charge two earbuds five times. There is no longer a need to be concerned about sweat and water with IPX5 waterproof technology. Enjoy the powerful bass performance and authentic 9D strong deep bass music sound. Intelligent touch control features that support song switching, phone calling, and call voice assistance.
WHAT’S IN THE BOX
- Bluetooth Earphones
- Charging Box
- USB Cable
- Ear caps
- User Manual
HOW TO PAIR BOTH EARBUDS
After power on, the Left and right unit will automatically pair. Once paired successfully, you will hear an indication voice “Connected”, the right LED light will flash red and blue alternately, the left LED will flash blue slowly. You just need power on the two units and pairing will be automatic.
HOW TO PAIR WITH A DEVICE
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the “GENERIC” from the list of available Bluetooth devices. If required, enter the password 0000′ to confirm &finalize pairing.
HOW TO CHARGE THE CHARGING CASE
Connect the USB charging cable to a computer USB port and the Micro USB plug to the charging port of the device. The LED light flashes rapidly indicating that the device is charging.
HOW TO CHARGE THE EARBUDS
The Red LED light on the earbuds turns on while the earbuds are charging. Put the earbuds into the charging case. Please make sure to put the “right” unit in the slot with “R” mark, put the “left” unit in the slot with “L” mark for automatic charging.
HOW TO CLEAN
To remove any loose dirt or wax, use a cotton swab. After giving them a thorough rinse in warm water, let them air dry on a lint-free cloth. Before putting them back on the earbuds, they have to be completely dry. Make the mesh cover clean.
FAQs
Why can’t Bluetooth find my devices?
Under Settings > System > Advanced, reset options can be found. Reset Android devices’ Bluetooth, mobile, and Wi-Fi.
Without a case, how do I charge my earbuds?
Using the USB port on your laptop or desktop computer is another way to charge your wireless earbuds without a charger. All you need to do is plug a USB cable into the USB port to start charging your earbuds.
Must I only use my left earbud?
With the right and left earbuds, you can independently make or take calls and listen to music.
Can you use wireless earbuds to place calls?
Nowadays, almost all wireless headphones and earbuds have a microphone built in.
Can I only use one earbud at a time?
Yes, you can take calls and listen to music in mono with the right earbud.
Why is the red blink on my TWS?
Your headphones’ red or amber flashing usually indicates a low battery.
How can I resolve a Bluetooth pairing issue?
Open the Settings app on your phone. Click to access connected devices. Tap “Bluetooth” if you see it. Select it if you see Previously connected devices.
Why are the volume levels on my earbuds so low?
Your battery level may have an impact on the volume of your wireless earbuds. The earbuds automatically lower the volume to save power when the battery is getting low.
Say I misplaced an earbud.
If one of your earbuds is broken or gone, you’ll have to buy a new set.
Why won’t the TWS connect?
If your TWS earbuds are too old, they will stop functioning.
How do I change the TWS volume?
The volume increases when you tap and hold the right earbud; it’s a neat feature. The volume decreases when you tap or hold the Left.
My wireless earbuds won’t connect, why?
It might be necessary to completely unplug and re-plug the earbuds. If you’re still having trouble pairing your earbuds, consult your user manual to see what it suggests. Someearbuds might have a fail-safe hard reset mode.
Why does one TWS earbud work but not the other?
One earbud may not be working for a variety of reasons. Some issues, like Bluetooth pairing issues or devices that simply need to be cleaned or reset, are easy to resolve.
How does the song change on TWS earbuds?
To play the next track, tap and hold the right earbud for two seconds. To play the track before it, tap and hold the left earbud.
Why won’t my TWS pair work?
On your device, Bluetooth ought to be disabled. The earbuds will automatically turn on the moment you remove them from their case. To manually sync them, double-press the left and right earbuds at the same time.