FORTIN WRX 2022 Regular Key Remote Starters and Alarm Systems Instruction Manual

June 16, 2024
FORTIN

REV.: 20231227
GUIDE # 112761

Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems

Vehicle functions supported in this diagram (functional if equipped)

VEHICLE| YEARS| Immobilizer bypass
Contournement| Lock| Unlock| Arm| Disarm| AutoLights Off| Horn| Trunk (open)| Parking Lights| Tachometer| Door Status| Trunk Status| Hand-Brake Status| Foot-Brake Status| OEM Remote monitoring| R.S. OEM remote Stand Alone
compatible
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
WRX| 2022-2023| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •| •

BYPASS FIRMWARE VERSION
VERSION LOGICIELLE CONTOURNEMENT
84.[11] MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.

| UNIT OPTION
OPTION UNITE| DESCRIPTION
---|---|---
Program bypass option:| C1| OEM Remote status (Lock/Unlock)
monitoring
Program bypass option
(If equiped with OEM alarm):| D2| Unlock before / Lock after (Disarm OEM alarm)
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:| A11| Hood trigger (Output Status).
Program bypass option:| A3| Key Bypass

MANDATORY INSTALL

*HOOD PIN

HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)
MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.

A11

Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

DESCRIPTION

FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems -
Figure 2

AUTOMATIC TRANSMISSION WIRING CONNECTION

FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems -
Figure 3

PROGRAMMING PROCEDURE

Press and hold the programming button:
Insert the 6-Pin Main connector.
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.

Release the programming button when the BLUE LED is ON.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm
Systems - Figure 6

Insert the required remaining connectors.

FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems -
Figure 7

Turn the Ignition to the ON/RUN position.
The BLUE LED will flash rapidly.

FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems -
Figure 8

Turn the Ignition to the OFF position.
The BLUE LED will turn off.

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.

REMOTE STARTER FUNCTIONALITY

FORTIN Subaru WRX 2022 Regular Key Remote Starters and Alarm Systems -
Figure 10

All doors must
be closed.| Remote start the
vehicle.| Unlock the doors with the remote- starter remote or  the OEM remote.| Insert and Turnthe key to the
Ignition ON/RUN
position.| Press
the brake pedal.| The vehicle can
now be put in to
gear and driven.

Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this  product.

WARNING
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no  liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind  indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction  guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

FORTIN User Manuals

Related Manuals