Blaupunkt AHDC TY-1.0 Reverse Camera Instruction Manual
- June 14, 2024
- Blaupunkt
Table of Contents
Blaupunkt AHDC TY-1.0 Reverse Camera
CAUTIONS
Safety Notes
This vehicle security system has been manufactured according to established safety guidelines. However, dangers may still occur if the safety notes in this manual is not observed. This manual is intended to familiarize the user with the reverse camera important functions. Read this carefully, prior to using the reverse camera. Keep this manual in an easily accessible location. In addition, do observe the instructions of the devices used in conjunction with this reverse
Road Safety
- Assign a mounting location that will not obstruct driver in any circumstances. Or cause injuries to drives and passengers in case of emergency brake or accidents.
- Ensure all wires are connected properly, and that the unit is functioning well before fitting the unit into the mount.
- Any unauthorized installation, disassembly or modification may cause malfunction to the unit and void warranty of the unit.
- Always use only the parts that are included with the units only.
- Do not damage vehicle components when drilling holes for the mount.
- Vehicle may differ from the description provided here. Consult an authorized Blaupunkt dealer or vehicle’s manufacturer if the information provided here does not fit your specific installation requirement.
- This unit is applicable for front and reverse AH□ or CVBS camera use. Consult an authorized Blaupunkt dealer during installation.
- Unit does not record video.
- Avoid automatic car wash or high-pressure water to prevent water and pressure from damaging the camera or causing it to fall off.
- Do not install this unit near heater outlet.
This manual may be updated from time to time without any notice. Visit ww.blaupunkt.com for more info.
Disclaimer
In no event shall Blaupunkt be liable for any direct, indirect, punitive,
incidental, special consequential damages to property or life and whatsoever
arising out of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in the United States and
canada. If purchased in the U.S. or Canada, this product is purchased on as-is
basis. No warranty, whether expressed or implied is provided in the U.S. or
Canada.
SPECIFICATIONS
| Features | AHDCTY – 1.0 |
|---|---|
| CMOS Image Sensor | |
| PAL TV System | |
| Effective Pixels | 192D(H)x 1080(V) |
| 750TVL Image Resolution | |
| 25 Frame Per Second | |
| Exposure & Gain Control | |
| 1/60~1/100000sec Electronic Shutter | |
| Auto White Balance | |
| Illumination Min. | 0.1 Lux/F |
| Horizontal View | 120 °H |
| Vertical View | 1000’\J |
| Diagonal View | 150°D |
| DC12V Voltage | |
| Current | 160mA-180mA |
| OC9-16V Operating Voltage Range | |
| Operating Temperature | -20~+70 °( |
| Storage Temperature | -30~+75°( |
| Protection Grade | IP68 |
| RCN4 PIN DIN | |
| Lens | 4glasses |
INSTALLATION DIAGRAM
-
Reverse Camera
Reverse Trigger
Ground the wire through the exterior body of the vehicle and keep the connection intact. -
Front Camera
Ground the wire through the exterior body of the vehicle and keep the connection intact.
FRONT/ REVERSE CAMERA INSTALLATION
- FRONT/REAR VIEW DISPLAY Default: Reverse Camera Setup
- Flip View & Remove Parking Line: Front Camera Setup
INSTALLATION LOCATION
Remarks:
- Pictures are for illustration purpose only, see actual vehicle for accurate installation location.
- Ensure diameter of hole size is correct before drilling.
- Ensure drilling process does not harm the component of the vehicle.
- Assign mounting location that will not obstruct camera view.
- Reverse Camera
- Front Camera
Attention
- Remove protective film from camera lens before use.
- Take extra precautions when setting up the connection near petrol tank and wires.
- Connect Red Wire with reverse light.
TROUBLESHOOTING
If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt’s authorized dealer if problem persists.
| Problem | Solution |
|---|
Display monitor / car radio does not
show reverse view when reversing.
| Restart the display monitor/ car radio.
Reverse view does not show even after
restarting the display monitor/ car
radio.
| Examine if the power suppl ies of the reverse light
or the rear car plate light is properly connected.
Reverse view does not show even though power supplies of the reverse light or the rear car plate light is
properly connected.
| Examine if the power supply cables of the reverse light or the rear car plate light is damaged. Repair/replace if the cables are
damaged.
Designed and engineered by Blaupunkt Competence Centre