GE Appliances RPWFE Water Filter Cartridge User Manual

GE Appliances RPWFE Water Filter Cartridge User Manual

WHEN TO REPLACE YOUR FILTER
The filter cartridge should be replaced every six months or earlier if 170 gallons of water has been dispensed or the flow of water to the dispenser or icemaker decreases.

IF YOU HAVE A GREY FILTER HOLDER

DO NOT TWIST CARTRIDGE!
Twisting may damage the refrigerator or filter.

REMOVING THE FILTER CARTRIDGE

1. Remove the old cartridge by opening the filter door and pulling on the bottom of the cartridge to allow it to swing outward.

2. When the cartridge can no longer swing, gently pull to unseat from the cartridge holder. A small amount of water may drip out. DO NOT TWIST CARTRIDGE! INSTALLING THE FILTER CARTRIDGE:

3. Centre the cartridge with a cartridge holder with the word FRONT facing outward. Push the cartridge inward until it is fully seated. The FRONT should be centred with the cartridge holder for proper installation. The RED indicators should not be visible.

4. While continuing to ensure the cartridge is fully seated in the holder, gently swing the filter inward until it is in position. If the filter will not swing easily, check to ensure the filter is properly aligned and fully seated within the cartridge holder.

5. BOTH MODEL TYPES For dispenser models – Run 2 gallons of water through the cold water dispenser (about 5 minutes) to remove air from the system. A newly installed filter cartridge will cause water to sprout from the dispenser. Use a large pitcher or sports bottle to catch the water spray.
   NOTE: It is normal for water to appear discoloured during the initial system flush. Watercolour will return to normal after the first few minutes of dispensing. For icemaker-only models – Discard the first bin of ice to allow air to be purged from the system. A newly installed filter cartridge will cause water to spurt into the icemaker body, which could lead to ice droplets around the icemaker area.
   NOTE: It is normal for these droplets and initial ice production to appear discoloured during the initial system flush. Ice colour will return to normal after the first bin of ice production DO NOT use the hot water dispenser or Autofill function until all air is removed from the system.

6. Reset the Filter status message (non-touch screen models).

IF YOU HAVE A BLACK FILTER HOLDER

REMOVING THE FILTER CARTRIDGE

1. Remove the old cartridge by opening the filter door and pulling on the bottom of the cartridge to disengage it from the filter clips. Swing the cartridge outward until you hear the ‘click’ of the cartridge holder engaging with the bracket.

2. Twist the cartridge one-quarter and turn counter-clockwise. After twisting, remove the cartridge by pulling it away from the cartridge holder. A small amount of water may drip out.
   INSTALLING THE FILTER CARTRIDGE

3. Align the filter cartridge with the cartridge holder with the word “FRONT” facing the top of the unit. Push the cartridge toward the rear of the unit until it is fully seated. Twist the filter cartridge clockwise one-quarter turn, until
   the word “FRONT” is facing outward.

4. While continuing to ensure the cartridge is fully seated in the holder, gently swing the filter inward until it is in position. If the filter will not swing easily, check to ensure the filter is properly aligned and fully seated within the cartridge holder. The RED indicators should not be visible.

WARNING
To reduce the risk associated with choking, do not allow children under 3 years of age to have access to small parts during the installation of this product. The disposable filter cartridge should be replaced every 6 months at the rated capacity, or sooner if a noticeable reduction in flow rate occurs. For the maximum benefit of your filtration system, GE Appliances recommends the use of GE Appliances-branded filters only. Using GE Appliances-branded filters in GE Appliances and Hotpoint® refrigerators provides optimal performance and reliability.

GE Appliances filters meet rigorous industry standards for safety and quality that are important for products that are filtering your water. GE Appliances has not qualified non-GE Appliances-branded filters for use in GE Appliances and Hotpoint refrigerators and there is no assurance that non-GE Appliances- branded filters meet GE Appliances standards for quality, performance and reliability. If you have questions, or to order additional filter cartridges, visit our website at gewaterfilters.com or call GE Appliances Parts and Accessories, at 877.959.8688. In Canada, call 800.661.1616.

SCALDING HAZARD
Use of the hot water dispenser before purging air from the system may result in the spurting of hot water and lead to hot water scalding. Follow the instructions above to purge all air from the system through the cold water dispenser before
using the hot water dispenser.

NOTICE
To reduce the risk associated with the ingestion of contaminants: Do not use water that is microbiologically unsafe or of unknown quality without adequate disinfection before and after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.

NOTICE
To reduce the risk of water leakage or flooding, and to ensure optimal filter performance:

• Read and follow use instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Do not install if water pressure exceeds 120 psi (827 kPa). If your water pressure exceeds 80 psi, you must install a pressure-limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.
• Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100°F (38°C).
• Protect the filter from freezing. Drain filter when temperatures drop below 33°F (0.6°C).
• Failure to replace the disposable filter cartridge at recommended intervals may lead to reduced filter performance and cracks in the filter housing, causing water leakage or flooding.
• Tested and certified by IAPMO R&T against NSF/ANSI 42, 53, 401, and P473 for reduction of the claims specified on the Performance Data Sheet and iapmort.org.

FILTER BYPASS PLUG

To reduce the risk of property damage due to water leakage, you MUST use the filter bypass plug when a replacement filter cartridge is not available. Some models do not come equipped with the filter bypass plug. To obtain a free bypass plug, call 800-GECARES. In Canada, call 800.561.3344. The dispenser and icemaker will not operate without either the filter or bypass plug installed. The bypass plug is installed in the same way as a filter cartridge.

FCC STATEMENT

FCCID: ZKJ-EBX1532P001
ICID: 10229A-EBX1532P001
“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” “This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”

Download PDF:GE Appliances RPWFE Water Filter Cartridge User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>