Qilive Q.3442 Gaming Pad User Guide

June 15, 2024
Qilive

Qilive Q.3442 Gaming Pad

SAFETY INFORMATION

Before using this product, carefully read these instructions and keep the user manual for future reference.

  1. Use this product in moderate climates only.
  2. Batteries must not be disposed of with normal household waste. Recycle them at the collection points provided for this purpose. Contact the local authorities or your dealer for recycling advice. Correct disposal of old batteries helps protect the environment and human health.
  3. Observe the safety and operating instructions of any other devices which are connected to the product.
  4. Risk of fire or explosion! The built-in battery must not be removed, disassembled, squeezed, heated or burned.
  5. The battery capacity varies with temperature change. The battery life can decline at a low temperature or below 0°C.
  6. The marking of this device (symbol of a crossed-out dustbin) complies with European Directive 2012/19/EU relating to “used electrical and electronic equipment”. This marking means that this equipment, at the end of its useful life, cannot be disposed of with other household waste. The user is required to deliver it to operators who collect used electrical and electronic equipment. Collection operators, including local collection points, shops and local authorities, create an appropriate system for collecting equipment. Appropriate collection of used electrical and electronic equipment helps avoid harmful impacts on human health and the environment, resulting from the presence of hazardous components, as well as from improper storage and treatment of this equipment.
  7. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

TECHNICAL DATA

Charging input 5 V DC 500 mA
Built-in battery DC 3.7 V / 600 mAh
Bluetooth Bluetooth version: 5.0
Charging time Approx. 2 hours
Battery life 8 hours for constant running
Delivery contents 1x Gaming pad – 1x USB-C cable

DESCRIPTION

  1. D-Pad
  2. SHARE
  3. L3 button
  4. PS button
  5. OPTIONS
  6. R3 button
  7. LT button
  8. LB button
  9. USB-C port
  10. RT button
  11. RB button
  12. TURBO button
  13. RESETQilive-Q.3442-Gaming-Pad-FIG-1

USE

Charge the gamepad

When the controller connecting to the console or charging, the RGB LED will display, light will be off after full charging. Press PS button more than 1 second to check the remaining battery.

Power control

  • Long press PS for 10 seconds to shut down.
  • The controller will sleep when the console sleeps or press the reset button.

Use with PC Bluetooth mode

  • X-put mode: When the controller is off, press R1+HOME enter Bluetooth pairing.
  • D-put mode: When the controller is off, press share+ HOME enter Bluetooth pairing. Turn on Bluetooth on the computer to pairing, and the channel light is steady on, the connection is successful.

Use with PC through the USB cable

Connect the USB-C cable to PC machine for using. The default mode is X-input, holding down SHARE+OPTIONS for 5 seconds to switch to D-input mode.

Use with PS4 console through the USB cable

Connect the USB-C cable to the PS4 console for the first time, press the PS button for wireless connection. A maximum of four controllers can be used at the same time. RGB lights are lit in the order of blue, red, green, and pink to configure each controller.

Program buttons as the turbo function

  • Press T + corresponding function key to achieve Manual Turbo function; Press same button again to achieve Automatic Turbo; Press the same thirdly to cancel Turbo; Long press T + SHARE key for 5 seconds to clear Turbo, the controller vibrates, indicating already clear

  • The available buttons for Turbo setting including ○, □, X, ▲, L1, L2, R1, R2. When the Turbo function is triggered, the channel indicator flash quickly.

  • Press T+ right joystick UP/DOWN to adjust Turbo speed, the motor shock 1 second for successful setting. The speed ranges from 5-12-20 Hz. The default value is 12 Hz and the controller has memory function after shutdown.

  • Operation Frequency: 2402MHz-2480MHz

  • maximum output power: 4.76 dBm

SAS OIA, 200, rue de la Recherche, Le Colibri BP 169, 59650 Villeneuve d’Asca, France www.auchan-retail.com/contact Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals