Qilive Q.5674 Blender User Manual

Qilive Q.5674 Blender

SAFETY INSTRUCTIONS

Before using this product, carefully read these instructions and keep the user manual for future reference.

1. Read all instructions. Misuse of appliances may result in personal injury.
2. To protect against the risk of electrical shock, do not put the Blender in water or other liquid.
3. This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return the appliance to the nearest Authorised Service Centre for examination, repair or adjustment.
7. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
8. Do not use outdoors.
9. Do not let the cord hang over the edge of the table or counter.
10. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the Blender. A spatula may be used but must be used only when the Blender is not running.
11. Blades are sharp. Handle carefully. Care should be taken when handling the sharp cutting blades, emptying the blending jar and cleaning.
12. To reduce the risk of injury, never start the appliance without first putting the blending jar properly in place.
13. Be certain the lid is securely locked in place before operating the Blender.
14. Never feed food by hand. Always use the Food Pusher.
15. Do not attempt to defeat the interlock mechanism.
16. Do not fill the blending jar above the marked maximum fill line to avoid the risk of injury due to damage to the lid or blending jar.
17. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
18. Be careful if hot liquid is poured into the Blender as it can be ejected out of the appliance due to a sudden steaming.
19. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
20. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
21. Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
22. This instruction manual contains information about the operating times and speed settings for accessories. Refer to the “Use” section.
23. Refer to the “Maintenance and Cleaning” section for instructions on cleaning the surfaces in contact with food.
24. This appliance is intended to be used in household and similar applications such as:
    • staff kitchen areas in shops, offices and other working environments;
    • farmhouses;
    • by clients in hotels, motels and other residential-type environments;
    • bed and breakfast type environments.
25. Before connecting to the power, re-check the type of supply and the mains voltage match with the details given on the rating label on the appliance.
26. The marking of this device (symbol of a crossed-out dustbin) complies with European Directive 2012/19/EU relating to “used electrical and electronic equipment”. This marking means that this equipment, at the end of its useful life, cannot be disposed of with other household waste. The user is required to deliver it to operators who collect used electrical and electronic equipment. Collection operators, including local collection points, shops and local authorities, create an appropriate system for collecting equipment. Appropriate collection of used electrical and electronic equipment helps avoid harmful impacts on human health and the environment, resulting from the presence of hazardous components, as well as from improper storage and treatment of this equipment.

TECHNICAL SPECIFICATIONS

PRODUCT DESCRIPTION

1. 25ml Measuring cup
2. Lid lock
3. Jar handle
4. Blade (not detachable)
5. Control knob
6. Motor base
7. Blending jar (1.75 L)
8. Jar lid

USE

BEFORE FIRST USE
Before using your Blender for the first time, wash the blending jar, lid and measuring cup in warm, soapy water, then rinse and dry thoroughly.
WARNING: Do not immerse the motor base in water or any other liquid.

1. Remove the jar lid. Turn the lid counterclockwise to unlock, then remove it from the jar.
2. Pull the transparent measuring cup out of the lid.
3. To remove the blending jar, simply lift it off the base.

Note: The blade is mounted in the blending jar and cannot be removed.

ATTACHING THE JAR AND LID
IMPORTANT: Place the Blender on a clean, dry, level surface, such as a countertop or table, with the control knob facing forward. Do not plug in the Blender until it is completely assembled.

1. Attach the blending jar to the base. By aligning the protrusion beneath the jar handle with the recess on the right side of the base top, insert the lower part of the jar into the base, then slightly turn the jar clockwise until it stops. The jar should be flush with the base, and the jar handle should be situated on the right side.
2. Attach the lid to the jar. Align the lid with the jar and turn the lid clockwise until you hear a click to fix it on the jar.
3. Insert the measuring cup into the hole of the lid.

Note: Your Blender will not operate unless the jar lid is fully closed and the jar is properly seated on the base. If there is no food placed inside the blending jar, the Blender will not operate.

OPERATING THE BLENDER
Before operating the Blender, make sure the jar, lid, and measuring cup are properly attached on the base (see “Attaching the jar and lid”).

WARNING| Rotating Blade Hazard

Use the measuring cup as a food pusher. Keep fingers out of openings. Keep away from children. Failure to do so can result in amputation or cuts.

---|---

1. Place the Blender on a clean, dry, level surface. Make sure the jar is properly attached to the base.

2. Place the food to be blended into the jar.

   • Usually, a certain amount of purified water needs to be added for the appliance to run smoothly. The amount of mixture should not exceed the MAX level indicated on the jar.
   • Peel or core the fruit or vegetables and then cut them into small pieces.

3. Attach the lid to the jar. Make sure the measuring cup is in place.

4. Plug the appliance into a power socket.

5. To turn on, turn the control knob to the desired speed position (1-5, lowest to highest).
   The Blender will run continuously.

6. For quick or delicate blending tasks, turn the control knob to the “P” position and keep holding the knob in that position for a few seconds, then release. The Pulse function runs at the highest speed. The Blender will stop when you release the knob.

   • When crushing ice or hard food, keep one hand firmly on the lid.
   • If you want to add ingredients while the blender is working, turn the knob to “0”, remove the measuring cup and add food through the lid opening. Re-attach the measuring cup before operating.

7. When finished, turn the control knob to the “0” position to turn off.

8. Wait until the blade comes to a complete stop.

9. Unplug the appliance.

10. Remove the jar lid. Turn the lid counterclockwise to unlock, then remove it from the jar.

11. Lift the jar off the base to remove food from the jar with a spatula.

Notes

• Do not use the appliance for more than 2 minutes continuously, and wait until the unit is cooled to room temperature before performing the next operation cycles. Allow at least 10 minutes of rest time between two cycles.
• If you want to stop the appliance during operation, turn the knob to the “0” position anytime.
• Be sure to turn off the Blender before removing the jar lid, or before unplugging the Blender.
• Never use boiling liquids or run the appliance empty.

Recommended Usage Chart

Food| Processing size| Weight| Processing time| Speed
---|---|---|---|---
Carrot, apple, pear etc.| Cut into 151515 mm| Carrot: 600g Water: 900g| seconds| High speed
Ice crush| Cut into 252525 mm| 100g| seconds| Pulse

MAINTENANCE AND CLEANING

WARNING! Always switch off and unplug the appliance before cleaning.

• Never immerse the power cord, plug or motor base in water or any other liquid.
• Do not use any abrasive detergents or scouring pads.
• Clean the housing of the motor base with a soft damp cloth and then wipe dry.
• Parts that have come into contact with food can be cleaned in soapy water.
• Allow the parts to dry thoroughly before reassembling the appliance.
• Store the blender in a cool dry place out of the reach of children.

CAUTION: Be careful when handling the cutting accessories as they are very sharp.
The blade is mounted in the jar and cannot be removed. Use extreme caution when cleaning the inside of the jar as the blade is extremely sharp. Always use a suitable cleaning tool, not your hands, to clean the inside of the jar.

CONTACT

• SAS OIA, 200, rue de la Recherche, Le Colibri
• BP 169, 59650 Villeneuve d’Ascq, France
• www.auchan-retail.com/contact

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>