Qilive Q.5472 Flexible Vacuum Cleaner User Manual

Qilive Q.5472 Flexible Vacuum Cleaner

SAFETY INSTRUCTIONS

Before using this product, carefully read these instructions and keep the user manual for future reference.

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

2. Children shall not play with the appliance.

3. Cleaning and user maintenance shall not be made by children without supervision.

4. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

5. The appliance is only to be used with the power supply unit provided with the appliance.

6. WARNING: For the purposes of recharging the battery, only use the detachable supply unit (MC2805B-V) provided with this appliance.

7. WARNING: This battery charger can only charge this particular vacuum cleaner. DO NOT use this battery charger to charge other products!

8. This appliance contains batteries that are only replaceable by skilled persons.

9. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.

10. It is necessary to take precautions during user maintenance.
    Refer to the «MAINTENANCE AND CLEANING» paragraph for maintenance and cleaning the appliance.

11. CAUTION: For domestic, indoor use only! Do not use the appliance in outdoor environments.

12. Switch off the appliance before changing accessories.

13. Do not use the appliance if it has been dropped, if there are any visible signs of damage or if the rechargeable battery is leaking.

14. Keep hair, loose clothing, fingers, and all parts of the body away from openings.

15. WARNING: Never use the appliance without the filter. Optimum dust collection will only be achieved with clean the filter and an empty dust cup.

16. Do not use any accessories other than those attached by the manufacturer, to avoid damaging the appliance and/or causing injuries.

17. Refer to the 5.1. CHARGING for information regarding charging.

18. Refer to the 2. TECHNICAL SPECIFICATIONS section for the type reference of the batteries.

19. Always ensure that hands are dry before handling the plug or switching on the appliance.

20. Never handle the hand-stick vacuum cleaner and its charging dock with damp or wet hands.

21. Do not use a damaged supply cord, plug, or a loose power outlet.

22. Fully unwind the supply cord before use. Do not charge the appliance while the supply cord is coiled as this may cause overheating. Do not bend, stretch or pull the supply cord in order to avoid electric shock.

23. Do not route the supply cord over sharp edges.

24. Do not let the supply cord hang over the edge, touch hot surfaces, or become knotted. Do not place a heavy object on the supply cord that could break it.

25. Never pull the power plug out of sockets using the supply cord, or pull on the supply cord to maneuver the appliance.

26. Before plugging into the socket-outlet, ensure there is not any dust or water on the power plug.

27. Connect the supply cord’s plug to an easily accessible socket, in order to quickly disconnect the appliance from the mains supply in an emergency.

28. For safety reasons, it is recommended to plug the appliance directly into its own electrical outlet on a dedicated circuit separate from other appliances. If the electrical circuit is overloaded with other appliances, your appliance may not function properly. Using in conjunction with a power strip or extension cord is not recommended.

29. Do not leave the supply cord lying exposed on the floor.

30. Always position the supply cord so that nobody can trip over or become entangled in it.

31. Do not immerse the appliance in water. Do not use near water.

32. Do not use the appliance if it has fallen into water or any other liquid. Have it checked by a qualified repair technician.

33. Do not expose to rain, wet and damp conditions.

34. Do no place the appliance in direct sunlight or enclosed space where ventilation is restricted, or where there are other heat sources.

35. Do not operate the appliance if it is visibly damaged.

36. It is recommended to regularly inspect the appliance.

37. Remove and safely discard any packaging material and promotional labels before using the appliance for the first time. Do not remove rating labels and safety information!

38. Store and operate this vacuum cleaner in room temperature environments only. It is forbidden to use the product at extremely low (below 0 °C) or high (above 40 °C) temperatures.

39. Never use to collect anything that is smoking or burning, such as cigarettes, hot aches, or matches.

40. Never use to collect flammable or combustible liquids, such as methylated spirits, petrol, acetone, etc., nor use on the area where they may be present.

41. Never use to collect sharp and hard objects, such as glass pieces, metaling shavings, coins, nails, screws, etc.

42. Never use to collect corrosive or toxic materials, such as mineral acids, alkali solutions, oxidizer, drain cleaner, chlorine bleach, ammonia, etc.

43. Never use in an enclosed space filled with vapours given off by oil-based paint, moth proofing substances, paint thinner, flammable dust, or other toxic or explosive vapours.

44. Do not use the appliance to vacuum up any water, liquids or wet dirt.

45. Avoid using the vacuum cleaner in locations with desk lamps and candles as well as locations with gasoline, distilled alcohol, thinner, ashtrays with burning cigarettes, etc.

46. Never short-circuit the charge pins with metal objects such as screwdrivers, etc.

47. CAUTION: Do not open the housing under any circumstances.
    Never insert fingers or any foreign objects in any opening of the appliance and do not obstruct the air vents. The ventilation slots shall be kept clear for the appliance to work properly and prevent dangerous overheating. Do not cover the appliance.

48. Before each use, ensure the openings are free of dust, hair, lint and anything that can reduce the flow.

49. Repairs must only be performed by authorized technicians. Users or other unauthorized persons shall not attempt to repair or disassemble the product. Improper repairs can lead to considerable hazards.

50. The supply voltage shall be the same as that indicated in the technical specifications and the appliance rating plate.

51. Check the vacuum cleaner is intact. DO NOT use if broken.

52. If the pins of the plug parts are damaged, the plug-in power supply shall be scrapped.
    BATTERY SAFETY INSTRUCTIONS

53. WARNINGS: The hand-stick vacuum cleaner contains non-replaceable batteries. Used batteries must not be disposed of in the household rubbish. The batteries must be removed from the appliance before it is scrapped. To remove the batteries, take the appliance to a designated disposal/collection site. For your safety, do not attempt to remove the batteries yourself. If the batteries are not properly removed, they may lead to damage to the batteries and device, cause personal injury, and/ or result in the device being unsafe.

54. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.

55. A battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

56. Should battery fluid leak and contact your eyes, skin or clothing immediately rinse with plenty of clean water. Immediately contact your physician in case of eye or skin contact.

57. The batteries are a sealed unit and under normal circumstances poses no safety concerns. In the unlikely event that liquid leaks from the battery do not touch the liquid and observe the following precautions:

    • Skin contact: can cause irritation. Wash with soap and water.
    • Inhalation: can cause respiratory irritation. Expose to fresh air and seek medical advice.
    • Eye contact: can cause irritation. Immediately flush eyes thoroughly with water for at least 15 minutes. Seek medical attention.
    • Disposal: wear gloves to handle the battery and dispose of it immediately, following local ordinances or regulations.

58. WARNINGS: During charging, the product must be placed in a well ventilated area.

59. The marking of this device (symbol of a crossed-out dustbin) complies with European Directive 2012/19/EU relating to “used electrical and electronic equipment”. This marking means that this equipment, at the end of its useful life, cannot be disposed of with other household waste. The user is required to deliver it to operators who collect used electrical and electronic equipment. Collection operators, including local collection points, shops and local authorities, create an appropriate system for collecting equipment. Appropriate collection of used electrical and electronic equipment helps avoid harmful impacts on human health and the environment, resulting from the presence of hazardous components, as well as from improper storage and treatment of this equipment.

60. Batteries must not be disposed of with normal household waste.
    Recycle them at the collection points provided for this purpose. Contact the local authorities or your dealer for recycling advice. Correct disposal of old batteries helps protect the environment and human health.

TECHNICAL SPECIFICATIONS

MAIN UNIT

AC ADAPTER

Manufacturer’s name or trade mark, commercial registration number and address| Jiangsu Midea Cleaning Appliances Co., Ltd No.39 Caohu Avenue, Xiangcheng Economic Development Zone, Suzhou, Jiangsu|
---|---|---
Model identifier| MC2805B-V| –
Input voltage| 100-240| V~
Input AC frequency| 50-60| Hz
Output voltage| 25.0, 29.0| V
Output current| 0.5| A
Output power| 12.5, 14.5| W
Average active efficiency| 86.9| %
Efficiency at low load (10 %)| 73.1| %
No-load power consumption| 0.08| W

PRODUCT DESCRIPTION

1. Power button
2. Low/High suction button
3. Tube release button
4. Foldable release
5. Floor nozzle release button
6. Floor nozzle
7. LED light
8. Handle
9. Charging slot
10. Dust cup
11. Dust cup release button
12. Indicator lights
13. Ventilation openings
14. Main body
15. Filter
16. Crevice nozzle
17. 2-in-1 round brush nozzle
18. Adapter
19. Wall mounting bracket
20. Cord holder
21. Motorised pet tool
    

INSTALLATION

MOUNTING THE WALL MOUNTING BRACKET

The product is designed to sit in the wall mounting bracket vertically.

1. Select an installation position located in the proximity of the electrical outlet.
2. Fit plastic toggle anchors in the holes (not in set).
3. Fix the wall mounting bracket to the wall and tighten two M4x20 screws (not in set).

Note: Do not drill into pipes or main cables beneath the surface during preparation for mounting holes. The fixing points must be capable of supporting the product’s total weight.

ASSEMBLING THE HAND-STICK VACUUM CLEANER

1. Insert the tube into the floor nozzle connector by pressing it in until it clicks securely into place.
2. Insert the main body into the top of the tube by pressing it in until it clicks securely into place.
3. Ensure all connections click securely into place.
   

Fitting and removing accessories

CAUTION: Before changing accessories, always switch the vacuum cleaner off first.
CAUTION: Risk of injury! Never hold the crevice nozzle close to the body, or it may stick to the skin. If the nozzle does get stuck, switch off the appliance immediately.

• To use 2-in-1 round brush nozzle, press the release button to unlatch and slide the brush up or down until it locks in place.
• All four accessories: crevice nozzle, motorised pet tool, 2-in-1 round brush nozzle, and floor nozzle can be connected to the tube and directly to the main body
  

FOLDING THE TUBE

To easily access hard-to-reach areas under furniture, pull the release lever up to position the tube to a lower angle.

USING THE PRODUCT

CHARGING

Notes:

• The appliance cannot be used while charging.
• Charge the appliance when the battery power indicator is blinking.
  1. Hang the appliance on its wall mounting bracket. Plug the charger tip into the charging port on the top of the handle.
  2. Plug the charger into a wall socket.
  3. During charging, the indicator light bars on the handle will illuminate in order of charge state and will blink, indicating the battery is charging. All the lights will be OFF when fully charged.
     

OPERATING THE VACUUM CLEANER

1. Insert the desired accessory into the tube suction opening or directly to the main body.

2. Press the power button to turn the appliance on.

3. This appliance has low and high suction power.
   To regulate the suction power, press the Low/ High suction button. The LED will be lit white at High speed.
   Note: After turning on the vacuum cleaner, the default suction power is set to high.

4. After vacuuming is finished, press the power button again to turn the appliance off.

5. Empty and clean the dust cup. Hang the appliance on its wall mounting bracket.
   

MAINTENANCE AND CLEANING

Note: Always switch off, and disconnect the appliance from the power supply (if charging) before changing accessories, cleaning or maintenance.

1. Do not submerge the appliance, its supply cord, and adapter in water or other liquids.
2. Avoid corrosive liquids and materials. Do not use any abrasive cleaners, chemicals, glass cleaners, universal cleaners, disinfecting agents or oil-based maintenance agents! Those products may damage the appliance.

CLEANING THE MAIN BODY AND ACCESSORIES

1. Use a soft damp cloth to wipe off any dirt from the main body. Pay attention to not allow water to get inside the appliance. Let it dry completely before use.
2. Wipe the accessories with a soft damp cloth and, if necessary, a little mild detergent. Let them dry completely.

CLEANING THE DUST CONTAINER

1. Under the bin, unhook the latch, and the lid will swing open. Empty the contents.

2. Gently pull the filter and its protection from the duct container under the dustbin. Empty the contents of the dust cup into a dustbin and clean it with a damp cloth, with a soft brush or rinse with cold water if necessary. Ensure the dust cup is completely dry before replacing it.

3. Remove the filter from the filter protection by turning it anti-clockwise and lifting it upwards.
   Clean the filter with a dry cloth or a soft brush. Run cold water over the outside of the filter and filter protection until the water runs clear, if necessary. Wash the filter regularly or as required. Lay the filter, and filter protection on its side to dry completely.

4. When completely dry, reinstall the filter protection into the duct container first. Put it in the filter protection and lock it into place by turning it clockwise. Make sure it is fitted properly. Then, fit the filter into the filter protection.

5. Reattach the dust cup in the main body
   

MAINTAINING THE FLOOR NOZZLE

Note: If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the roller brush.

1. Pull down the lever on top of the removable plate and take out the plate. Then take out the roller brush.
2. Clean the roller brush and remove any stubborn dirt. Cut any threads or hairs that have wound themselves around the roller brush with a pair of scissors. Wipe the roller brush compartment with a soft, damp cloth. Let it dry completely.
3. Reinsert the roller brush. To replace the removable plate, insert the bottom of it into the hole, then push the top of it until it clicks into place.
   

MAINTAINING THE MOTORISED PET TOOL

Note: If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the roller brush.

1. To remove the roller brush from the motorized pet tool, slide the locking plate from to .
   Gently pull the roller brush out from the side.

2. Clean the roller brush and remove any stubborn dirt. Cut any threads or hairs that have wound themselves around the roller brush with a pair of scissors. Wipe the roller brush compartment with a soft, damp cloth. Let it dry completely.

3. Replace the roller brush into its compartment until it locks securely in place. Slide the locking plate from to .

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>