Qilive Q.5206 Juice Extractor User Manual
- June 9, 2024
- Qilive
Table of Contents
Qilive Q.5206 Juice Extractor User Manual
SAFETY INFORMATION
Before using this electrical appliance, read the instructions below and keep them for future use:
-
Turn off the appliance and wait for the filter to come to a complete stop before releasing the latch.
-
Do not operate the appliance continuously for more than 40 seconds if it is heavily loaded.
Wait until it has cooled down sufficiently before reusing it. -
Do not remove the container while the appliance is operating.
-
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
-
Do not submerge the motor unit, mains cable or plug in water or any other liquid.
-
Before first use, wash all accessories in warm, soapy water.
Carefully rinse and dry. -
Turn off the appliance and unplug it before changing the attachments or touching any parts that move during the operation of the appliance.
-
Do not use the appliance if the rotating screen is damaged.
-
Do not insert your fingers or any other object into the feeding tube while operating the appliance.
Use only the pusher provided for this purpose. -
Before connecting the appliance to a wall socket, ensure that the local electrical current matches the one specified on the appliance’s nameplate.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with appliance.
This appliance shall not be used by children.
Keep the appliance and its cord out of reach of children. -
Do not use the appliance for any purpose other than that for which it was designed.
-
Electrical and electronic equipment must be disposed of through a separate waste collection.
Do not dispose of electrical and electronic equipment alongside household waste.
Dispose of them at the appropriate disposal and waste recycling sites. -
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling, or cleaning.
-
WARNING: Improper use of this appliance could result in injury.
-
Details of how to clean surfaces that are in contact with food are given in the “MAINTENANCE AND CLEANING” section.
TECHNICAL DATA
| Operating voltage | 220-240 V~, 50-60 Hz |
|---|---|
| Energy consumption | 600 W |
| Capacity | 500 ml |
| Safety class | Class II |
DESCRIPTION
- Pusher
- Feeding tube
- Filter/grater
- Juice collector
- Jug lid
- Jug
- Pulp container
- Motor unit
- Latch
- Speed control knob
- Spout
INSTALLATION
-
Remove the cable from its compartment at the rear of the appliance. Insert the juice collector (4) into the appliance.
To install the pulp container (7), tilt it forwards slightly.
Insert the top of the container first, and then the bottom. -
Do not empty the pulp container (7) while the appliance is operating.
First turn off the appliance, then gently pull out the pulp container (7).
Note: After emptying the pulp container (7), put it back in place before continuing to use the appliance. -
Place the filter (3) in the juice collector (4).
Hold the feeding tube (2) above the filter (3), and then slot it in from the top. -
Ensure that the filter (3) and the juice collector (4) fit securely on the motor shaft (you should hear a click).
-
Pass the latch (9) over the feeding tube (2) and lock it in the closed position (you should hear a click).
Insert the pusher (1) in the feeding tube (2), ensuring that the groove is aligned with the protrusion on the tube wall (2). -
Close the jug (6) with its lid (5) to avoid splashing; the lid (5) can also be used when storing juice in the refrigerator.
-
Place the jug (6) beneath the spout (11).
USE
The appliance can only be operated if all parts are properly installed and the feeding tube (2) is locked with the latch (9) (see figure on page 2).
-
Wash the fruit and/or vegetables and cut them into pieces small enough to fit into the feeding tube (2).
-
Place the jug (6) beneath the spout (11).
-
Turn on the appliance by turning the knob (10) to I (normal speed) or II (high speed).
Note that the appliance can only be operated if the safety mechanism (latch) is properly locked on the appliance.- Speed I is suitable for soft fruit and vegetables (watermelons, grapes, tomatoes, cucumbers, raspberries, etc.).
- Speed II is suitable for all types of fruit and vegetables. Allow the appliance to run empty for 5 seconds before inserting fruit or vegetables.
-
Place the pre-cut pieces in the feeding tube (2) and press them slowly against the rotating filter (3) using the pusher (1).
-
Avoid pushing the pusher (1) too hard as you could block the filter (3) and affect the quality of the juice.
-
Never put your fingers or any other object in the feeding tube (2). Always use the pusher (1) for this purpose.
-
Once all of the ingredients have been used and the juice has all run out, turn off the appliance and wait until the filter (3) has come to a complete stop.
Warning: The appliance should not be operated continuously for more than
1 minute, after which it should be left idle for 1 minute.
After three consecutive cycles, allow the motor to cool for 15 minutes.
TIPS
-
Preferably use fresh fruit and vegetables, as they are juicier.
This appliance is particularly suitable for pineapples, beetroot, celery, apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes. -
Fruit does not necessarily need to be peeled, except for thick-skinned fruit (oranges, pineapples, raw beetroot, etc.).
Also remove seeds and stones as they give the juice a bitter taste and can damage the filter (3) or grater (3). -
For apple juice, note that the thickness of the juice depends on the type of apple used.
A juicier apple will give a more liquid juice.
Choose a type of apple that matches your preferred juice texture.
Also note that apple juice oxidizes very quickly.
To slow down the process, add a few drops of lemon juice. -
Starchy fruit (bananas, papayas, avocados, figs, mangoes, etc.) cannot be processed with this appliance.
Use a blender, food processor or hand blender for this type of fruit. -
This appliance can also be used to process leaves and stems (e.g. lettuce).
-
Drink the juice immediately after extracting it.
When exposed to the air, the juice gradually loses its taste and nutritional values. -
To extract as much juice as possible each time, always push the pusher (1) down slowly.
-
This device is not suitable for hard and/or fibrous and/or starchy fruit and vegetables (e.g. sugar cane).
MAINTENANCE AND CLEANING
Never use scouring pads, abrasive cleaning products or other abrasive or
corrosive liquids (alcohol, petrol, acetone, etc.) to clean the appliance.
The appliance is easy to clean if you get into the habit of doing so
immediately after each use.
-
Turn off the appliance. Unplug the appliance and wait for the filter (3) to come to a complete stop.
-
Remove dirt from the motor unit (8).
Disassemble the appliance in the following order:- Remove the pulp container (7).
- Remove the pusher (1).
- Open the latch (9).
- Remove the feeding tube (2).
-
Remove the juice collector (4) and the filter (3).
-
These parts can be cleaned with a brush in hot water and washing-up liquid. Rinse them under the tap.
-
Wipe the motor unit (8) with a damp cloth.
-
Do not immerse the motor unit (8) in water or rinse it under the tap.
GUARANTEES
Guarantees and limitations of liability
Products are guaranteed for a period of 36 months from the date of purchase,
or from the date of delivery to the customer’s home.
Depending on the country, this guarantee consists of 24 to 36 months of
validity for the legal compliance guarantee.
For countries that only implement a 24-month legal compliance guarantee, a
12-month commercial guarantee is applied at the end of the first guarantee,
and supplements it.
Guarantee Application Procedure
For the legal compliance guarantee
Please consult your retailer for information and/or to refer to their GTCs
(General Terms and Conditions of Sale).
For the commercial guarantee
Please go to the reception desk at your place of purchase with your proof of
purchase (e.g. sales receipt), the product and the accessories it came with,
and its original packaging, for all countries other than France.
It is important to have the date of purchase, the model and the serial number
or IMEI number to hand (this information is usually indicated on the product,
packaging, or on your proof of purchase).
You’ll need to bring back the product with the accessories needed for its
correct functioning (power supply, adapter, etc.).
If your claim is covered by the guarantee, the after-sales service may, within the limits of local law, either:
- Repair or replace faulty parts.
- Exchange the returned product with a product that has, at the least, the same features and that offers equivalent performances.
- Refund the product at the price stated on the proof of purchase.
Repaired or replaced products may include new and/or reconditioned hardware and components.
Commercial guarantee exclusions:
- Damages or problems caused by improper use, accident, tampering/modification or an unsuitable current or voltage connection.
- Use or storage conditions which are detrimental to the good conservation of the appliance (oxidation, corrosion), use of energy, use or installation non-compliant with the manufacturer’s instructions, or negligence or use of peripherals, software or consumables which are unsuitable.
- Professional or collective, industrial or commercial use of the product.
- Products that have been modified, or which have damaged, altered, erased or oxidized guarantee seals or serial numbers.
- Replaceable batteries and accessories are guaranteed for 6 months.
- Battery failure, caused by overcharging or by failure to follow the safety instructions set out in the manual.
- Cosmetic damage, including scratches, bumps or vandalism.
- Damage caused by any servicing operations carried out by non-authorised persons.
- Faults caused by normal wear and tear or the normal ageing of the product: seals, filters, accessories, vacuum cleaner brush and hose, lamps, overhead projector lamps, washing machine paddles, etc.
- Software updates as a consequence of changes to network settings.
- Damage caused by elements external to the appliance (foreign bodies, insects, etc.).
- The contents of the devices – freezer, washing machine, etc. (food, clothing, etc.)
- Product failure caused by the use of third-party software to modify, change, adapt or alter the product as is.
- Product failure resulting from its use without the accessories supplied with the product or approved by the Manufacturer.
- Parts for normal wear and tear or damage from use: type, inner tube, brake, etc.
The customer is responsible for regularly backing up the data contained on
their hard disk or in the internal memory of their device, and this before any
claim is submitted.
Auchan cannot be held liable for the loss or destruction of stored data, nor
may it be held liable for damage caused to software resulting from, in
particular, a restoration or a breakdown.
Similarly, Auchan is not required to check that SIM/SD cards have been removed
from returned products.
Under no circumstances shall the provisions set out above reduce or eliminate: the legal guarantee referred to above, and the manufacturer’s commercial guarantee, if applicable (see guarantee form).
CUSTOMER SUPPORT
SAS OIA, 200, rue de la Recherche, Le Colibri
BP 169, 59650 Villeneuve d’Ascq, France
www.auchan-retail.com/contact
