mifa F60 40W Output Power Bluetooth Speaker with Class D Amplifier User Manual
- June 5, 2024
- MiFa
Table of Contents
mifa F60 40W Output Power Bluetooth Speaker with Class D Amplifier
Warning
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended.
- Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damages.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product.
- Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not dissemble the product, or make any modifications to the structure or any parts of it.
- Keep the product out of children’s reach.
- If the battery is not properly replaced, there will be an explosion accident, which can only be replaced with the same type of battery.
- Batteries (battery packs) can not be exposed to such conditions as sunshine, fire or similar overheating conditions.
Packing list
Keys Functions
Power Button: Press and hold the button for 2 seconds to turn on or turn
oft; short press to play or pause
CallAnswer Button: Short press to answeror hang up; long press to
reject
Ports Functions
Bluetooth Connection
Turn on the speaker
Press and hold the power button for 2 seconds to turn on the speaker with a
prompt sound. And the white LED light flashes indicating it is in the pairing
mode.
Connect it to your device
Turn on the Bluetooth of yourdevice and select Mifa_F60. Once the connection
is completed, it will beep and the white LED light will stay on. The speaker
will connect to the last-connected device automatically once the device’s
Bluetooth is turned on.
Other Instructions
To connect to another device, press and hold the button M for 2 seconds to
disconnect the paired one and the speaker will enter the pairing mode.
True Wireless Stereo Function
-
Set up the TWS system
Turn on two F60 speakers and make sure no device connects with either of them. Short press one speaker’s “-” and”+” buttons simultaneously and there will be a beep sound to indicate pairing is taking place. Once pairing is complete, there will be another beep sound. -
Pair two TWS speakers with a Bluetooth device
Select Mifa_F60 in the Bluetooth settings menu of the Bluetooth device. There will be a sound indicatinga successful connection and the LED indicator keeps on. -
Stop the TWS
Short press either speaker’s “.” and “+” buttons simultaneously to disconnect it with the other one.
Tips:
- For the first time of setting up the TWS system, the speaker which you press the “-” and “+” button will work as the main speaker and the other one as the dependent speaker.
- After the first connection, the main speaker will keep working as the main speaker and the dependent one will keep working as the dependent one in the future connection. And they will connect with each other automatically once they power on.
- After setting up the TWS system, the dependent speaker’s blue LED indicator stays on and the main one’s LED indicates your operation.
- The true wireless stereo function supports only 2 speakers.
- After the TWS system is set up successfully, you just need to operate either speaker. The other one will do the same operation simultaneously.
Specifications
Size: 215*112.5 68.5 mm
Weight: 970g (including the built-in Lithium battery)
Trouble Shooting
MIFA INNOVATIONS LLC
www.mifa.net Designed in US Made in China
Copyright O MIFA. All rights reserved.
MIFA, the MIFA logo and other MIFA marks are all owned and registered by MIFA
INNOVATIONS LLC. All other trademarks are the property of their respective
owners. The information contained here is subject to change without prior
notice.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
cOuld void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interterence will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV tech nician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction FCC ID: 2AXOX-F60
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>