iskydance PBL-60-12 Constant Voltage LED Driver Owner’s Manual
- June 15, 2024
- iskydance
Table of Contents
Constant Voltage LED Driver
Model No.: PBL-60-12, PBL-60-24
Features
- 100-240VAC Input
- 1 channel constant voltage output, Max. total output power 60W
- Ultra-thin design, light weight and high ef
- Over-load / Short circuit protection
- Suitable for indoor LED lighting application
- 5 Year, 50,000hr warranty
Applications
- Suitable for cabinet LED strip.
Technical Parameters
| Model | PBL-60-12 | PBL-60-24 |
|---|---|---|
| Output | Output Voltage | 12VDC |
| Output Current | Max. 5.0A | Max. 2.5A |
| Output Power | Max. 60W | |
| Startup time | 1S/230VAC,2S/115VAC | |
| Dimming Range | 0～100％ | |
| Ripple & Noise | 600mVp-p | |
| Input | Input Voltage Range | 100～240VAC |
| Frequency Range | 50/60Hz | |
| Efficiency | 88% | |
| Alternating Current | 1.0A/100VAC, 0.5A/230VAC | |
| Power Factor | 0.5 | |
| No Load Power | 0.3W | |
| Inrush Current | Cold start 38A | |
| Anti Surge | L-N:1KV | |
| Leakage Current | ＜0.75mA | |
| Protection | Over Load | Shut down the output Voltage, when the |
load>=110％～14,0％, auto recovers.
Short Circuit| Shut down the output Voltage, auto recovers
Environment| Woking Temperature| -20℃～45℃
T-case Max| 75℃
Working Humidity| 20％～90％RH, non-condensing
Storage Temperature/Humidity| -40℃～80℃, 10％～95％RH
Temperature Coefficient| ±0.03％/℃ (0-50％)
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| IP20
Safety&EMC| Security Specifications| IEC/EN61347-1, IEC/EN61347-2-13,
GB19510.14
Withstand Voltage| I/P-O/P: 3750VAC
Insulation Resistance| I/P-O/P: 100MΩ/500VDC/25℃/70％RH
EMC Emission| EN61000-3-2 Class C, IEC61000-3-3
EMC Immunity| EN61000-4-2.3.4.5.6.8.11, EN61547
Certications| CE
Others| Net weight| 150g
Gross weight| 170g
Size| 164x55x18mm
NOTE| All parameters NOT specially mentioned are measured at 230VAC input,
rate current and 25 ℃ of ambient temperature.
Mechanical Structures and Installations
Wiring Diagram
- Without dimming
- With dimming
Output Load VS Temperature
Static characteristic
Installation precautions
Please do not stack the products.
The distance between two products should be ≥0.5m, so as not to affect heat
dissipation and lifespan of the products.
Packing List
User Manual Ver 1.0.0