1Mii B06 Plus Wireless Audio Adapter User Manual
- June 15, 2024
- 1Mii
Table of Contents
1Mii B06 Plus Wireless Audio Adapter User Manual
In The Box
Basic Operation
-
Plug
-
Pairing and connect
-
Enjoy
Instructions for operation
- Connect the B06S+ to the audio input port of the power amplifier or active audio with an audio cable.
- Connect the B06S+ to the power supply, the device will automatically power on.
- Pairing – Pair B06S+ with your Bluetooth-enabled phone/computer/tab- let and other devices.
- First time use: B06S+ will automatically enter pairing mode after power on (LED light flashes red and blue).
- Activate Bluetooth on your phone or another device and click “B06S+” to connect.
- Wait for the connection to be successful, adjust the appropriate volume, and enjoy the music.
How to enter pairing mode?
Press and hold the / for 2 seconds after powered on,B06S+ will enter the pairing mode (LED light flashes red and blue).
How to reset the device?
If B06S+ cannot be connected or does not work normally, please refer to the following methods to reset the device: Turn on B06S+, and long press / for 10 seconds to clear the paired devices, the indicator light flashes purple quickly 3 times and soon enter pairing mode automatically.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by IMii Ltd. is under license. Other trademarks and trade names are those of their respective owners.
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by IMii Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radiofrequency electromagnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
CE
IMii Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.Imii.com
In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.
Shenzhen IMii Technologies Limited Baoan District, Shenzhen 518100 China
EU Importer: eVatmaster Consulting GmbH Bettina. 30,60325 Frankfurt am Main, Germany
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping. repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the
used appliance together with household waste.
EC REP
eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com
Scan the code to get more information.
Operator: ANKBIT INTERNATIONAL LIMITED
Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA
TSUI, KOWLOON, HONG KONG
Manufacturer: ShenZhen Ankbit Electronics Limited
Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St.,
Baoan Dist., Shenzhen, China
We hope you never have the need, but if you do, our service is friendly and hassle-free.
support@lmii.com
web: www.lmii.com
FCC ID: 2AJU3RT615
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>