FORTIN 2023 Push To Start Remote Starters and Alarm Systems Installation Guide
- June 15, 2024
- FORTIN
Table of Contents
- FORTIN 2023 Push To Start Remote Starters and Alarm Systems
- INSTALLATION STAND ALONE
- MANDATORY INSTALL
- Parts required (Not included)
- KEY CONTROL
- DESCRIPTION
- AUTOMATIC TRANSMISSION WIRING CONNECTION
- REMOTE STARTER FUNCTIONALITY
- CONTACT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FORTIN 2023 Push To Start Remote Starters and Alarm Systems
INSTALLATION STAND ALONE
- ONLY COMPATIBLE WITH AUTOMATIC TRANSMISSION VEHICLES
MANDATORY INSTALL
NOTES
TO COMPLETE THE INSTALLATION EITHER USE ONE OF THE EXISTING KEYS OR ORDER A NEW KEY.
Parts required (Not included)
- 1X Vehicle key
- 1X Fuse
- 2X 1 Amp Diode
- 1X Relay
- 1X Relay for Advanced keyless entry
This guide may change without notice. See www.fortin.ca for the latest version.
PARTS REQUIRED (NOT INCLUDED)
Notice: the installation of safety elements are mandatory. The hood pin and the valet switch are essential security elements and must be installed.
STAND ALONE CONFIGURATION
REMOTE STARTER FUNCTIONALITY
REMOTE STARTER WARNING CARD
- CUT THIS WARNING CARD AND STICK IT ON A VISIBLE PLACE: or use the package RSPB, Sold separately.
WARNING
THE VEHICLE CAN BE STARTED BY EITHER: PRESSING THE LOCK BUTTON ON THE OEM REMOTE 3 TIMES CONSECUTIVELY OR BY A SMARTPHONE. TURN ON THE SAFETY SWITCH LOCATED UNDER THE DASHBOARD BEFORE WORKING ON THE VEHICLE.
KEY CONTROL
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
DECRYPTOR PROGRAMMING PROCEDURE
-
Press and hold the programming button: Connect the 4-pin Data-link connector.
-
The BLUE, RED, YELLOW and BLUE & RED LEDs will alternatively illuminate.
-
Release the programming button when the LED is BLUE.
-
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1.
-
Insert the required remaining connectors.
-
Do not press the brake pedal.
-
Press the Push-to-Start button twice to turn on the ignition.
-
Press and release the programming button once (1x).
-
The BLUE LED will turn off.
Wait,
-
The BLUE LED will flash rapidly.
-
Press the Push-to-Start button once to turn off the ignition.
-
The BLUE LED will flash rapidly.
KEY BYPASS PROGRAMMING PROCEDURE 2/2
- Unlock the doors with the OEM remote.
- The BLUE LED will turn off.
Wait,
-
The RED and YELLOW LEDs will alternated.
-
Disconnect all the connectors and after the Data-Link (4-pins) connector.
Use the tool
- FLASH LINK UPDATER or FLASH LINK MOBILE to visit the DCryptor menu.
- Parts required (not included)
- AFTER DCRYPTOR PROGRAMMING COMPLETED Go back to the vehicle and reconnect the 4-Pin (Data-Link) connector and after, all the remaining connectors.
REMOTE STARTER FUNCTIONALITY
If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our website regularly.
We recommend that you update this module to the latest firmware and download
the latest installation guide(s) before the installation of this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer-safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever for the accuracy or currency of the information
supplied. The installation in every case is the sole responsibility of the
installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no
liability or responsibility whatsoever resulting from any type of
installation, whether performed properly, improperly or in any other way.
Neither the manufacturer nor distributor of this module is responsible for
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by a qualified technician. The information supplied is a
guide only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
CONTACT
- TECH SUPPORT
- Tél: 514-255-HELP (4357)
- 1-877-336-7797
- www.fortinbypass.com