APANTAC HDBT-SET-13 4K/UHD HDBT Extenders Receiver User Manual

4K/UHD HDBaseT
Extenders (4K@60, 4:4:4)
with Bi-directional POE
Supports up to 35/40m in UHD
Support up to 70m in 1080P HDBT-SET-13
USER MANUAL v.1.0

Overview

HDBT-SET-13 uses the HDBaseT™ technology to extend HDMI 2.0 UHD signals up to 35/40 meters or HDMI 1.4 1080P signals up to 70 meters over a single CATx cable. The HDBT-SET-13 uses the BDP™ technology that support bi-directional POE to allow the power to be inserted on either the transmitter or receiver.

Package Contents

• 1 x HDBT-1-Es-UHD-POE (Transmitter)
• 1 x HDBT-1-Rs-UHD-POE (Receiver)
• 1 x User manual
• 1 x Power adapter DC48V with lock
• 1 x IR Receiver
• 1 x IR Blaster
• 2 x mounting plates

Features

• Supports 4K@60Hz(4:4:4) up to 35/40 meters
• Supports 4K@24/25/30Hz(4:4:4) and 4K@60Hz(4:2:0) and 1080P(12bit) up to 70 meters
• Supports up to HDMI 2.0
• HDCP 1.4/2.2 compliant
• Supports 3D and CEC pass-through
• Supports RS232 bi-directional transfer
• Supports all frequency of IR control
• Supports all digital audio modes
• Supports bi-directional POE (BDP™)

Specifications

Transmitter/Receiver

FRONT VIEW

1. DIP SW
   a) PIN 1 – OFF: Default
   ON: F/W Upgrade Mode
   b) PIN 2 – Reserved
   c) PIN 3 – OFF: Auto Mode
   ON: Manual Mode

2. IR OUT – For IR blaster cable

3. IR In – For IR receiver cable

4. LED Status – Top to bottom: Power/HDCP/LINK/MODE

REAR VIEW

1. Power jack 48 DC (BDP™) – Can be inserted on either transmitter or receiver
2. HDBaseT Transmitter LINK Out or Receiver LINK In
3. HDMI Tranmsitter Input or Recevier Output
4. RS-232

Installation

1. Turn off source and display
2. Connect the HDMI cable between the source and the transmitter
3. Connect the HDMI cable between the display and the receiver
4. Connect the LAN (RJ45) cable between the transmitter and receiver
5. Connect the power to either the transmitter or the receiver
6. Power on the source and display

HDCP LED Status

• Off: No video
• Blinking: Video on, HDCP On or Off

IR Blaster Cable:
Connect the IR blaster cable to port

IR Receiver Cable:
Connect the IR blaster cable to port

The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administration.

© 2020 APANTAC LLC.
All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921

Documents / Resources

| APANTAC HDBT-SET-13 4K/UHD HDBT Extenders Receiver [pdf] User Manual
HDBT-SET-13 4K UHD HDBT Extenders Receiver, HDBT-SET-13, 4K UHD HDBT Extenders Receiver, UHD HDBT Extenders Receiver, HDBT Extenders Receiver, Extenders Receiver, Receiver
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>