HUAWEI Eyewear 2 Smart Glasses User Guide
- June 17, 2024
- Huawei
Table of Contents
HUAWEI Eyewear 2 Smart Glasses
Product Specifications
- Model: Eyewear 2
- Model Number: LFT-G00
- Features: Adjustable frame, demo lens, nose pad, frame hinge, temple hinge, indicator, anti-sound leakage hole, speaker hole, microphone, noise cancellation microphone
Appearance
- Frame
- Demo lens
- Nose pad
- Frame hinge
- Temple hinge
- Indicator
- Anti-sound leakage hole
- Speaker hole
- Microphone
- Noise cancellation microphone
INFO: The eyewear is sold with decorative lenses. Avoid wearing these lenses for extended periods of time.
Downloading and installing the app
Scan the QR code to download and install the HUAWEI AI Life app, where you can try more features and customize the device settings.
Charging
- Connect one end of the charging converter with the charging port to a USB-C charging cable.
- Connect the other end of the charging converter to the two arms to charge the eyewear. Make sure that the indicators on the arms are on.
- Do not charge the eyewear while you are wearing it. Do not excessively bend or pull the charging converter.
- The eyewear will enter low power mode if left idle for more than 3 minutes. The eyewear will automatically exit low-power mode when you put it on or charge it.
Pairing
Method 1:
- While the eyewear is being charged, press and hold the button on the charging converter for 4 seconds and then release. Wait for the indicators on the arms to flash white, which indicates that the eyewear has entered Pairing mode.
- Go to your phone’s Bluetooth settings, search for the eyewear, and connect to it.
INFO: The eyewear will automatically enter Pairing mode when charged for the first time.
Method 2:
- While wearing the eyewear, press and hold the middle part of the outside of both arms at the same time for at least 4 seconds, until you hear a long beep, which indicates that the eyewear has entered Pairing mode.
- Go to your phone’s Bluetooth settings, search for the eyewear, and connect to it.
INFO: If no sound plays when you press and hold the arms with both hands, press and hold another position or check whether the eyewear has sufficient power.
Factory reset
Make sure that the eyewear is charging. Press and hold the button on the charging converter for 10 seconds and then release. Wait for the indicators on the arms to flash red, which indicates that the eyewear has been restored to its factory settings.
Gesture controls
Volume adjustments: Swipe along either arm.
INFO: To sync the volume adjustment between your eyewear and phone,
you’ll need to toggle on the switch to sync Bluetooth volume on certain phone
models. Rejecting a call : Press and hold either arm for 2 seconds.
Play/Pause: Double-tap either arm.
Answering/Ending a call: Double-tap either arm.
INFO: You can customize what the double-tap and swipe gestures do in the HUAWEI AI Life app, by touching the eyewear card and then Gestures. From there you can select voice assistant wakeup, skipping to the previous/next track, or other operations. Actual interface may vary.
All contents in the documents included in the packaging box, including but not limited to information about and portrayals of the appearance, color, size, and supported features of the product (updated features will come with software updates), are for reference only. The actual product may vary.
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of this mark by
- Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.
Safety Information
- To protect your hearing, do not listen to audio at a high volume for a long period.
- Do not heat or bend the glass’s arms to avoid damage, functional failures, and fire hazards.
- This device strictly complies with standard EN ISO 12870: 2016 for ophthalmic optics spectacle frames.
- Wearing this device will not protect your eyes from injury if you look directly at the sun or other strong light sources, or from physical trauma (applicable to optical glasses).
- Use the microfiber cloth that comes with your glasses or a clean and soft cloth to clean your glasses. Do not clean your glasses with anything sharp or abrasive. Use a neutral cleanser to clean your glasses. To avoid lens damage, deformation, and discoloration, do not use abrasive cleansers or sprays, high-concentration cleaners, chemical cleaning fluid, alcohol, or acetone solvent to clean your glasses.
- Wearing the glasses during intense exercise poses a risk of facial injury as the glasses may get damaged.
- Clean the glass’s arms and frames regularly to avoid skin irritation.
- Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for more information.
- Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
- When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers. Do not charge the glasses when you are wearing them.
- Comply with regional or national regulations. Exercise caution when using the device while driving.
- Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and its accessories by mistake, or swallow the small components, which may cause choking.
- This device is rated IPX4 under IEC 60529. It was tested under controlled laboratory conditions and determined to be splash-resistant. Splash resistance is not permanent, and performance may deteriorate with daily wear and tear. Therefore, do not expose this device or its accessories to rain or moisture.
- If this device or its accessories get wet, wipe them as soon as possible and place them in a cool, ventilated place for them to dry. Do not re-use or charge until completely dry.
- Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
- Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injuries.
- Do not leave the battery in any extremely low-pressure environments, to avoid explosions or leakage of flammable liquids or gases.
- Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory warranty.
- Stop using this device and disconnect all connected devices before performing cleaning and maintenance on this device.
- The charging converter is not water-resistant. Before charging, clean the charging contact points on the glasses and springs on the charging converter. If there is any moisture, wipe it dry promptly to avoid short circuits.
- Do not rinse the arms or perform ultrasonic cleaning on your glasses.
- If you experience skin discomfort when wearing this device, take it off and consult a doctor.
- This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a previously paired Huawei device, and WiFi or mobile data is enabled. You can disable automatic firmware updates in Settings.
Disposal and recycling information
This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service, or visit the website https://consumer.huawei.com/en/
EU Regulatory Conformance
Hereby, Huawei Device Co., Ltd. declares that this device LFT-G00 is in
compliance with the following Directive RED 2014/53/EU,
RoHS 2011/65/EU, EU REACH regulation, and Batteries (where included)
directive.
The full text of the EU Declaration of Conformity and the most recent
information about accessories & software are available at the following
internet address: https://consumer.huawei.com/certification.
Frequency Bands and Power
Bluetooth: 2.4 GHz 14 dBm.
RF Exposure Information
For the countries that adopt the SAR limit of 2.0 W/kg over 10 grams of
tissue. The device complies with RF specifications when used near your head.
The highest reported SAR value: head SAR: 0.658 W/kg.
Legal Notice
Copyright © Huawei Device Co., Ltd. 2023. All rights reserved.
All contents in the documents in the packaging box, including but not limited
to information about and portrayals of the appearance, color, size, and
supported features of the product (the latest features will come with software
updates), are for reference only. The actual product may vary.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co., Ltd.
is under license. Huawei Device Co., Ltd. is an affiliate of Huawei
Technologies Co., Ltd.
Privacy Protection
To better understand how we protect your personal information, please see the
privacy policy at
https://consumer.huawei.com/privacy-policy, or read the privacy policy and
service terms using the corresponding app.
Software License Agreement
Please read the software license agreement carefully before using this device.
By using the device, you indicate that you agree to be bound by the license
agreement. To read the agreement, please visit the following website:
https://consumer.huawei.com/en/legal/eula/.
FAQ
Frequently Asked Questions
- Q: Can I wear the decorative lenses for extended periods?
- A: It is recommended to avoid wearing these lenses for long periods as they are sold as decorative accessories.
- Q: How do I download and install the app for additional features?
- A: Scan the provided QR code to download and install the HUAWEI AI Life app. This app allows you to access more features and customize device settings.
References
- Huawei - Building a Fully Connected, Intelligent World
- Huawei Türkiye
- Certification | Legal | HUAWEI Global
- 最终用户软件许可协议 - 华为官网
- 华为消费者业务隐私声明 - 华为官网
- HUAWEI Global
- Software License - HUAWEI Global
- HUAWEI Support - Official Consumer Site
- HUAWEI Polska
- banner
- 華為 - 消費者業務官網
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>