APANTAC EVS-1-E-III EVS Extenders User Manual
- June 6, 2024
- APANTAC
Table of Contents
EVS EXTENDERS
(Third Generation)
EVS-1-E-III EVS-1-R-III
USER MANUAL V1.0
Overview
The extension of DVI or VGA, USB keyboard, and 4 x RS422 signal up to 100/150 meters away by using the EVS-SET-1-III Extender and one CAT-5e or better LAN cable.
Package Contents
- EVS Extender Local Unit x 1
- EVS Extender Remote Unit x 1
- User manual x 1
- Power adapter DC 12V with lock x 2
Features
-
Supports 4K@24/25/30Hz (4:4:4) and 4K/60 (4:2:0) and 1080p (12bit) up to 100 meters.
-
VGA resolution from 800×600 to 1080P.
(Need a passive DVI-to-VGA adapter or DVI-A Cable) -
Supports DVI-D (Single Link) and DVI-A
-
Supports RS-232(Bi-direction transfer) baud rate up to 115200 bps.
-
Supports Long Reach Mode (Video Resolution Max. 1920x1080p@60Hz / 8bit, Cable Distance Max. 150 Meters)
-
Support USB 1.0/1.1 EVS keyboard.
-
Support USB (only keyboard) connection to EVS XT-3.
-
Local console port (Monitor + USB keyboard)
-
Auto console selection between Local and Remote.
-
RS422 support full-duplex data communication with baud rate up to 19200 bps.
-
Support RS422 pin: Tx, Rx, RESET.
-
RS422 pin: “RESET”, keeps High when EVS-extender power off to prevent EVS-extender reset EVS in power off status and disconnect status.
Specifications
Function
| EVS-1-E-III|
EVS-1-R-III
---|---|---
HDMI Connector|
HDMI A-Type Female x 1
DVI Connector| DVI-I(24+5P) Female x 1| None
RJ45 Connector|
RJ-45 Jack x 1
USB Connector| USB A Type Female x 2
USB B Type Female x 1| USB A Type Female x 2
RS422 Connector|
DB9 Female x 4
RS232 Connector|
DB9 Female x 1
DIP SW|
4 Pin x 1
LED|
LED(G) x 6, LED(Y) x 4
DC Jack|
V
|
V
Max. Resolution|
4K@30Hz / 1080p@60Hz
Cable Distance|
100/150 m (Max.)
Patching Distances|
5m + 90m + 5 m
Power Adapter|
DC 12V with lock
Enclosure|
Metal
Weight|
1148g
|
1125g
Dimensions (LxWxH)|
181x138x44 mm
Local Front View
| No | Component | Description |
|---|---|---|
| 1 | DB9 Connector | RS-232 Extender or FW Upgrade. |
| 2 | DIP Switch | Mode Select |
| 3 | Power LED | On when the unit power on. |
Off when the unit has no power.
4| Link LED| On when links successfully.
Off when no link to Remote unit.
5| Tx1/Rx1 LED| Indicate RS-422(1)
Tx1(G) SEND / Rx1(Y) Receive
6| Tx2/Rx2 LED| Indicate RS-422(2)
Tx2(G) SEND / Rx2(Y) Receive
7| Tx3/Rx3 LED| Indicate RS-422(3)
Tx3(G) SEND / Rx3(Y) Receive
8| Tx4/Rx4 LED| Indicate RS-422(4)
Tx4(G) SEND / Rx4(Y) Receive
DIP SW
Pin1 - OFF : HDBT Mode / ON : Long Reach Mode
Pin2 - OFF : DEFAULT(RS232 Extender)
ON : F/W UPGRADE Mode
Pin3 - OFF : Valens F/W Upgrade / ON : MCU TX F/W Upgrade
Pin4 - OFF : EDID Bypass(Remote or Local)
ON : EDID DVI 1080P
Local Rear View
| No | Component | Description |
|---|---|---|
| 1 | RS422 Connector #1 to EVS | The DB9 cable to EVS plugs here. |
| 2 | RS422 Connector #2 to EVS | The DB9 cable to EVS plugs here. |
| 3 | RS422 Connector #3 to EVS | The DB9 cable to EVS plugs here. |
| 4 | RS422 Connector #4 to EVS | The DB9 cable to EVS plugs here. |
| 5 | Power Jack | The power adaptor plugs in here. |
| 6 | CAT.5 Connector | Plugs the CAT5 cable into this connector. |
| 7 | Monitor Connector | The HDMI cable connects to the monitor plugs in here. |
| 8 | DVI-I Connector to EVS | DVI : The DVI-D(Single Link) cable to EVS plugs |
here.
VGA : The DVI-A cable to EVS plugs here.
9| USB B Type Connector| The USB cable to EVS plugs here.
10| USB A Type Connector| The USB Keyboard plugs here.
Remote Front View
| No | Component | Description |
|---|---|---|
| 1 | DB9 Connector | RS-232 Extender or FW Upgrade. |
| 2 | DIP Switch | Mode Select |
| 3 | Power LED | On when the unit power on. |
Off when the unit has no power.
4| Link LED| On when links successfully.
Off when no link to Local unit.
5| Tx1/Rx1 LED| Indicate RS-422(1)
Tx1(G) SEND / Rx1(Y) Receive
6| Tx2/Rx2 LED| Indicate RS-422(2)
Tx2(G) SEND / Rx2(Y) Receive
7| Tx3/Rx3 LED| Indicate RS-422(3)
Tx3(G) SEND / Rx3(Y) Receive
8| Tx4/Rx4 LED| Indicate RS-422(4)
Tx4(G) SEND / Rx4(Y) Receive
DIP SW
Pin1 - OFF : HDBT Mode / ON : Long Reach Mode
Pin2 - OFF : DEFAULT(RS232 Extender)
ON : Valens RX F/W UPGRADE Mode
Pin3,4 - Reserved
Remote Rear View
| No | Component | Description |
|---|---|---|
| 1 | RS422 Connector #1 to EVS | The DB9 cable to “EVS Controller” plugs here. |
| 2 | RS422 Connector #2 to EVS | The DB9 cable to “EVS Controller” plugs here. |
| 3 | RS422 Connector #3 to EVS | The DB9 cable to “EVS Controller” plugs here. |
| 4 | RS422 Connector #4 to EVS | The DB9 cable to “EVS Controller” plugs here. |
| 5 | Power Jack | The power adaptor plugs in here. |
| 6 | CAT.5 Connector | Plugs the CAT5 cable into this connector. |
| 7 | Monitor Connector | The HDMI cable connects to the monitor plugs in here. |
| 8 | USB A Type Connector | The USB Keyboard plugs here. |
Installation
© 2021 APANTAC LLC, All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000, FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice