APANTAC HDBT-SET-11 4K UHD HD BaseT Extenders User Manual
- May 15, 2024
- APANTAC
Table of Contents
4K/UHD HDBaseT
Extenders (4K@60, 4:4:4)
Supports up to 70m in UHD
Support up to 100m in 1080P
HDBT-SET-11
USER MANUAL v.3.0
Overview
HDBT-SET-13 uses the HDBaseT™ technology to extend HDMI 2.0 UHD signals up to 70 meters or HDMI 1.4 1080P signals up to 100 meters over a single CATx cable.
Package Contents
- 1 x HDBT-1-E-UHD (Transmitter)
- 1 x HDBT-1-R-UHD (Receiver)
- 1 x User manual
- 2 x Power adapter DC12V with lock
- 2 x mounting plates
Features
- Supports 4K@60Hz (4:4:4) up to 70 meters
- Supports 4K@24/25/30Hz (4:4:4) and 4K@60Hz(4:2:0) and 1080P(12bit) up to 100 meters
- Supports up to HDMI 2.0
- HDCP 1.4/2.2 compliant
- Supports 3D and CEC pass-through
- Supports RS232 bi-directional transfer
- Supports all frequency of IR control
- Supports all digital audio modes
Specifications
| Function | HDBT-1-E-UHD | HDBT-1-R-UHD |
|---|---|---|
| HDMI Connectors | 1 x HDMI Type A Female | |
| RJ45 Connectors | 1 x RJ45 for HDBaseT | |
| RS232 Connectors | 1 x DB9 Female | |
| IR Input | 1 x 3.5 mm phone jack | |
| IR Output | 1 x 3.5 mm phone jack | |
| DIP Switch | 1 x 3 pin Dip Switch | |
| LED | 1 x 4×1 LED | |
| Max Resolution | 4K/UHD@60Hz (4:4:4) | |
| Max Distance | 35 meters – UHD, 40 meters – UHD w/ CAT7, 70 meters – |
1080P
Power Adapter| Locking 48V DC
Weight| 400g| 400g
Dimensions| 152 x 115x 30 mm
FRONT VIEW (Transmitter/Receiver)
-
DIP SW
a) PIN 1 – OFF: Default
ON: F/W Upgrade Mode
b) PIN 2 – OFF: Long Reach Mode (up to 150 meters in 8 bit)
ON: HDBT Mode
c) PIN 3 – OFF: Auto Power Saving Mode
ON: Manual Power Mode Mode (power always on) -
IR OUT – For IR blaster cable
-
IR In – For IR receiver cable
REAR VIEW (Transmitter)
REAR VIEW (Receiver) 
- Power 12V
- LINK (RJ-45 Connector)
- HDMI Out
- RS-232
Installation
- Turn off source and display
- Connect the HDMI cable between the source and the transmitter
- Connect the HDMI cable between the display and the receiver
- Connect the LAN (RJ45) cable between the transmitter and receiver
- Connect the power to either the transmitter or the receiver
- Power on the source and display
IR Blaster Cable:
Connect the IR blaster cable to
- Tip : Anode(+)
- Sleeve : Cathode(-)
IR Receiver Cable:
Connect the IR blaster cable to
- Tip : Signal
- Ring : QD
- Sleeve : Power
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice
© 2023 APANTAC LLC. All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>