APANTAC SDM-SDI-HDTV-UHD Intel SDM Based 12G SDI Receiver User Manual
- June 12, 2024
- APANTAC
Table of Contents
APANTAC SDM-SDI-HDTV-UHD Intel SDM Based 12G SDI Receiver User Manual
Overview
The SDM-SDI-HDTV-UHD can be installed in any display that is equipped with Intel SDM-S or SDM-L slot. The SDM-SDI-HDTV-UHD can accept 12G/6G/3GHD-SDI signals
Package Contents
- 1 x SDM-SDI-HDTV-UHD
- 1 x User manual
- 1 x SDM-S mounting bracket
Features
- Supports 12G/6G/3G/HD-SDI signals
- Built-in SDI loop out
- Outputs HDM 2.0 RGB 4:4:4@ 60Hz via the SDM connectors
- Maximum Power Consumption 9.5W
Specifications
| Function | SDM-SDI-HDTV-UHD |
|---|---|
| SDM Edge Connector | Intel SDM PCIex8(98pin) x1 |
| SDI In | BNC |
| SDI Out | BNC |
| Status LEDs | 4 in 1 LED |
| Max Resolution | 3840×2160@60Hz |
| Cable Reach | 12G – 70m, 3G – 190m, 1.5G – 260m |
| Mounting Brackets | SDM-S, SDM-L |
| Environment | Operating temperature – 0C ~ 55C Humidity: 20% ~ 90% / non- |
condensing
Weight| 230g without packaging
Dimensions (LxWxH)| Board -60x110x20, SDM-S – 80x124x25
FRONT VIEW
- SDI input
- Status LED – Power, HDCP, LINK, MODE
- POWER – Green = On
- STATE – Green = System booted properly
- INPUT – Green = SDI input detected properly
- LOOP – Flashing = Loop out working properly
- SDI loopout
- Audio pair selection
SDM-S Mounting Bracket
Assembly
SUPPORTED FORMATS
SUPPORTED SIGNAL TYPE/FORMATS
12G-SDI| REC 709/2020 output follows input
| 3840×2160| YCbCr 4:2:2 60p/59.94p/50p 10 bit
| YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit
| RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit
| 4096×2160| YCbCr 4:2:2 60p/59.94p/50p 10 bit
| YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit
| RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit
6G-SDI| REC 709/2020 output follows input
| 3840×2160| YCbCr 4:2:2 30p/29.97p/25p, 24p/23.98p
3G-SDI Level A| REC 709/2020 output follows input
| 1920×1080| YCbCr 4:2:2 60p/59.94p/50p 10 bit
| YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit
| RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit
| 2048×1080| YCbCr 4:2:2 60p/59.94p/50p 10 bit
| YCbCr 4:4:4 30P/29.97p, 25p, 24p/23.98p 10 bit
| RGB 4:4:4 30p/29.97p, 25p, 24p/23.98p 10 bit
| 1280×720| YCbCr 4:4:4 30p/29.97p 10 bit
| RGB 4:4:4 30p/29.97p 10 bit
3G-SDI Level B| REC 709/2020 output follows input
| 1920×1080| YCbCr 4:2:2 60p/59.94p/50p 10 bit
1.5G-SDI| REC 709/2020 output follows input
| 1920×1080| YCbCr 4:2:2 30P/29.97p, 25p, 24p/23.98p, 60i/59.94i/50i 10 bit
| 1280×720| YCbCr 4:2:2 60p/59.94p/50p10 bit
© 2023 APANTAC LLC, all rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000, FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC
(“Apantac”) products.
Apantac makes no representation or warranties with respect to the accuracy or
completeness of the contents of this publication and reserves the right to
make changes to specification and product descriptions at any time without
notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>