APANTAC HDBT-SET-14 4K-UHD HDBaseT Extenders User Manual
- June 10, 2024
- APANTAC
Table of Contents
APANTAC HDBT-SET-14 4K-UHD HDBaseT Extenders
Overview
HDBT-SET-14 uses the HDBaseT™ technology to extend HDMI 2.0 UHD signals up to 70 meters or HDMI 1.4 1080P signals up to 100 meters over a single CATx cable. The HDBT-SET-14 uses the BDP™ technology that support bi-directional POE to allow the power to be inserted on either the transmitter or receiver.
Package Contents
- 1 x HDBT-1-E-UHD-POE (Transmitter)
- 1 x HDBT-1-R-UHD-POE (Receiver)
- 1 x User manual
- 1 x Power adapter DC48V with lock
- 1 x IR Receiver
- 1 x IR Blaster
- 2 x mounting plates
Features
- Supports 4K@60Hz(4:4:4) up to 70 meters
- Supports 4K@24/25/30Hz(4:4:4), 4K@60Hz(4:2:0) and 1080P(12bit) up to 100 m
- Supports long reach mode – 1080P@60Hz(8bit) up to 150 meters
- Supports up to HDMI 2.0
- HDCP 1.4/2.2 compliant
- Supports 3D and CEC pass-through
- Supports RS232 bi-directional transfer
- Supports all frequency of IR control
- Supports all digital audio modes
- Supports bi-directional POE (BDP™)
Specifications
| Function | HDBT-1-E-POE-UHD | HDBT-1-R-POE-UHD |
|---|---|---|
| HDMI Connectors | 1 x HDMI Type A Female | |
| RJ45 Connectors | 1 x RJ45 for HDBaseT | |
| RS232 Connectors | 1 x DB9 Female | |
| IR Input | 1 x 3.5 mm phone jack | |
| IR Output | 1 x 3.5 mm phone jack | |
| DIP Switch | 1 x 3 pin Dip Switch | |
| LED | 1 x 4×1 LED | |
| Max Resolution | 4K/UHD@60Hz (4:4:4) | |
| Max Distance | 70 m – UHD, 100 m – 1080P, 150 m – 1080P long reach mode | |
| Power Adapter | Locking 48V DC | |
| Weight | 500g | 500g |
| Dimension | 152 x 115x 30 mm |
FRONT VIEW (Transmitter/Receiver)
-
DIP SW
a) PIN 1 – OFF: Default
ON: F/W Upgrade Mode
b) PIN 2 – OFF: Long Reach Mode
ON: HDBaseT Mode
c) PIN 3 – OFF: Auto Mode
ON: Manual Mode -
IR OUT – For IR blaster cable
-
IR In – For IR receiver cable
-
LED Status – Top to bottom: Power/HDCP/LINK/MODE
REAR VIEW (Transmitter/Receiver)
- Power jack 48 DC (BDP™) – Can be inserted on either transmitter or receiver
- HDBaseT Transmitter LINK Out or Receiver LINK In
- HDMI Transmitter Input or Receiver Output
- RS-232
Installation
- Turn off source and display
- Connect the HDMI cable between the source and the transmitter
- Connect the HDMI cable between the display and the receiver
- Connect the LAN (RJ45) cable between the transmitter and receiver
- Connect the power to either the transmitter or the receiver
- Power on the source and display
HDCP LED Status
- Off: No video
- Blinking: Video on, HDCP On or Off
IR Blaster Cable:
Connect the IR blaster cable to port
IR Receiver Cable:
Connect the IR blaster cable to port
© 2022 APANTAC LLC. All
rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac makes no representation or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specification and product descriptions at any time without notice
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI licensing Administration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>