kleintools 1001 Main Area Light Instruction Manual

kleintools 1001 Main Area Light

Specifications

• Power button
• Battery Status Indicator
• USB-C input
• Charging Flap
• Main Area Light LEDs (x16)
• Glow Ring
• Kickstand
• MODboxTM Clasp
• Magnets (x4)
• Nail hole
• USB-C Cable

Product Usage Instructions

Operating Instructions
Lumen and Runtime Specifications:

Battery Status Indicator
If the battery status indicator is not illuminated, the battery is fully discharged. Plug in the unit and allow it to charge fully for a minimum of 6 hours.

Maintenance
To mount to MODboxTM rail, ensure an audible click to lock the MODboxTM clip and bottom feet from the bottom rail. To remove from MODboxTM rail, follow the reverse steps.

FAQ

• Q: What should I do if the battery status indicator is not illuminating?
  

  • A: If the battery status indicator is not illuminated, the battery is fully discharged. Plug in the unit and allow it to charge fully for a minimum of 6 hours.

• Q: How do I know the remaining charge of the battery?
  

  • A: Refer to TABLE 2 – CHARGE REMAINING in the user manual to understand the LED status corresponding to the charge remaining percentage.

• Q: How do I ensure proper disposal of the product?
  

  • A: Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Visit www.epa.gov/recycle for additional information.

DESCRIPTION

The Klein Tools 56416 MODbox™ Area Light is a lithium-ion powered work light with multiple mounting options via the 90˚ pivoting kickstand, MODbox™ compatible mount, strong magnets, and a nail hole. The light rotates 360˚ to direct the light where needed. This compact, rugged, 9.8′ (3 m) drop-rated, 1000 lumen work light, is IP66 water and dust-resistant, making it a durable, reliable, versatile light for professional active daily use

CONTENTS

• 56416 Rechargeable MODbox™ Area Light
• 20″ (51 cm) USB-C Cable
• This Instruction Sheet

GENERAL SPECIFICATIONS

• Operating Temperature : -4°F to 122°F (-20°C to 50°C)
• Storage Temperature : -4°F to 113°F (-20°C to 45°C)
• Charging Temperature: 32°F to 113°F (0°C to 45°C)
• Dimensions 4.75″ × 3.5″ × 3″ (120.7 mm × 89 mm × 76.2 mm)
• Weight: 0.550 kg (1.213 lbs)
• Charging Time: 6 Hours
• Charging Requirements: 5V DC, 2.4A max
• Battery Type: Internal, 21700 Lithium Ion, 3.6V / 10000mAh
• Output Capacity : 36Wh
• Shelf Life: Charge every 3 months
• Drop Protection : 9.8′ (3 m)
• Ingress Protection (IP) Rating : IP66

Specifications subject to change.

WARNINGS
Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in risk of fire, electric shock, serious injury and/or property damage.

• DO NOT use the product if it is damaged or modified.
• Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or injury.
• Risk of fire and burns. DO NOT open, crush, heat above specified maximum temperature or incinerate. Prolonged exposure to direct sunlight can result in elevated temperatures.
• DO NOT immerse in water or other liquids.
• Properly seal the charging port cover to achieve specified water & foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in risk of fire or electric shock.
• DO NOT open the charging port cover if wet or in a wet environment. Thoroughly dry the unit and the seal around water-resistant cover completely before opening water resistant cover.
• DO NOT subject to impacts or drops greater than 3 m (9.8 ft). Drops larger than this may not show signs of damage, but internal components may have been compromised. It is advisable to replace the unit if any such severe events occur.
• DO NOT attempt to repair the product or charging cable. There are no user-serviceable parts.

FEATURE DETAILS (FIG. A)

1. Power button
2. Battery Status Indicator
3. USB-C input
4. Charging Flap
5. Main Area Light LEDs (x16)
6. Glow Ring

SYMBOLS ON PRODUCT

• Warning or Caution
• Risk of Electrical Shock
• Strong Magnetic Field
• Do Not Stare at  Operating Lamp:  Visible Radiation
• Direct Current (DC)
• Read Instructions
• Conformité Européenne. Conforms with European Economic Area directives
• UKCA – United Kingdom Conformity Assessment
• WEEE – Battery disposal

OPERATING INSTRUCTIONS

• Press and hold the power button 1 to turn ON the light 5
• When the light is on, press and release the power button to cycle through the modes in this order, HIGH, MEDIUM, LOW

LUMEN AND RUNTIME SPECIFICATIONS

NOTE: Lumen output and runtimes accurate under optimal operating conditions

BATTERY STATUS INDICATOR
While light is OFF, press and release power button to show battery level on Battery Status Indicator 2 , refer to Table 2 for status specifications.

• Main light flashes 3 times at battery charge level 5% and 1%
• If the unit does not turn on (no LEDs or indicator bars illuminated), the battery is fully discharged. Plug in unit (see CHARGING INSTRUCTION section) and allow to charge fully for a minimum of 6 hours.

CHARGING INSTRUCTIONS & CHARGE STATUS INDICATOR
Connect USB-C cable connection to the light, plug the other end of
cable into USB port, or AC adapter (not included). USB adapter/power supply should not exceed the specified charging voltage and current (see GENERAL SPECIFICATIONS).

The battery level indicator bars will illuminate (see TABLE 1)

CHARGE MODE : While charging, the light can be turned ON with a
400-lumen output. Once the charging cable is disconnected the light will automatically switch to the previous mode used. While in this mode, light will be fully charged from 0% – 100% battery charge level within 30 hours

NOTE: Lumen output and runtimes accurate under optimal operating conditions

BATTERY INTERNAL TEMPERATURE PROTECTION INDICATION
While charging the light, if internal battery temperature exceeds 45°C the charge current to the battery is limited to avoid damaging the battery pack. If the internal battery temperature still rises above 50°C, charging battery pack will be stopped with following LED indication

• The fuel gauge status LED Red, Green and Yellow, Green LED will blink alternately and light will shut down and stop charging or discharging if temperature conditions in Table 3 (protection) below are detected.
• The battery will resume normal operation after the internal battery temperatures return to normal operating ranges shown in Table 4
  (recovery) below.

MODbox™ COMPATIBILITY
To mount to MODbox™ rail

• Hook the top two “feet” of the kickstand 7 on the top rail
• Firmly press on the base of the area light until there is an audible click to lock the MODbox™ clip 8 and bottom feet from the bottom rail.

To remove from MODbox™ rail

• Apply pressure to the MODbox™ clip 8
• Begin to pull the light from the rail starting from the bottom.
• Unhook the top feet from the top rail and remove the light.

MAINTENANCE

CLEANING: Be sure the device is disconnected from all power sources and devices. Use a clean, dry, soft, lint-free cloth to wipe down the entire unit. Do not use abrasive cleaners or solvents

STORAGE: If storing for more than 1 month, charge completely before storage, and recharge approximately every 3 months to avoid full discharge. Store in cool temperatures, mild humidity, and away from direct sunlight (See GENERAL SPECIFICATIONS).

Leaving in a vehicle or other confined spaces in extreme hot temperatures can lead to decrease in service life, overheating, or fire. Extreme
cold temperatures below the specified storage range can also harm performance and service life. Keep away from corrosive chemicals and gases.

After taking out of storage, inspect visually to make sure device and all accessories look satisfactory. Allow unit to return to ambient conditions before recharging or charging other devices.

RECHARGING: Recharge as needed. There are no pre-designated intervals at which to recharge as long as you are using regularly. Avoid discharging completely on a regular basis, as this can impact overall life. Regularly inspect ports and charging cable for any debris, dirt, damage, and corrosion. DO NOT attempt to fix. Replace device and/or cable as needed.

FCC AND IC COMPLIANCE

See this product’s page at www.kleintools.com for FCC compliance information.
Canada ICES-003 (B) / NMB-003 (B)

WARRANTY

www.kleintools.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov/recycle for additional information.

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069 1-800-553-4676 customerservice@kleintools.com www.kleintools.com

References

• Reduce, Reuse, Recycle | US EPA
• Klein Tools - For Professionals since 1857 | Klein Tools
• Warranty | Klein Tools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>