RYOBI P7181 STICK VACUUM WITH ROLLER BAR Instruction Manual
- June 5, 2024
- RYOBI
Table of Contents
RYOBI P7181 STICK VACUUM WITH ROLLER BAR
INSTRUCTIONS
NOTE: These instructions supplement the REMOVING THE ROLLER BRUSH FOR CLEANING instructions in your operator’s manual. For complete assembly instructions, refer to page 6 of the Operator’s Manual.
WARNING: This insert sheet is not a substitute for reading the operator’s
manual. To reduce the risk of injury or death, user must read and understand
operator’s manual before using this product.
Your vacuum cleaner comes with a general purpose roller brush prein-stalled
and a replacement roller brush designed to clean high pile carpets only.
Follow these steps to clean or replace a roller brush:
- Remove battery pack and allow roller brush to STOP. Remove the roller bar assembly.
- Rotate the end cap counterclockwise to unlock and remove the roller brush.
- Clean the roller brush. Cut any threads or hair wrapped around the roller brush. For peak performance, routinely clean the roller brush.
- Install either roller brush. Rotate the end cap clockwise to lock in place.
- A – Roller bar
- B – End cap
- C – Roller brush (general purpose)
- D – Roller brush (for high pile carpets only)
-
* A – Tangled threads and hair- B – Roller brush (general purpose)
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579 • www.ryobitools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>