Nanoleaf 4D Screen Mirror Kit User Guide
- June 14, 2024
- nanoleaf
Table of Contents
Nanoleaf 4D Screen Mirror Kit
Instillation
Step 1: Setup
Skip to Step C if you have the Screen Mirror Kit (Camera Only)
A. Wipe the back. of your screen to ensure it is dry and clean.
OPTIONAL Use the tape provided and attach corner brackets to the back of
the screen (at least 1′ away from the edge).
B. Adhere the lightstnp around the bock of your screen (bending around corner brackets, if used).
C. Place the camera above the screen using the included mount QR on a surface below the screen without the mount (secure to surface with tape If desired).
D. Connect the hghtstrip and camera cables into the Controller (secure to the back of your screen with tape if desired), and plug in to power.
Step 2: Download the App & Pair
| ``Still Need Help?
Visit g0.nanoleaf.me/my4d for more detailed instructions.
WARNINGS & CAUTIONS Please read this safety information carefully and
keep this document for future reference Help articles and customer support is
always available at https://nonoleof.me/support. This Nanoleaf® product is
not designed, certified, nor intended for use in: emergency exits, emergency
lighting, or other use cases involving critical systems for human safety;
outdoor areas, regardless of weather conditions; regions or countries other
than that in which the product was intended for and certified for sale in.
When using this Nanoleaf® product: Do not open or disassemble the device, os
this will void the warranty and make the product unsafe for use. The flexible
coble and power supply cannot be replaced by another third party product. If
the cable is damaged. the entire controller and power supply should only be
replaced with original equipment manufactured by Nanoleaf®Using any non-
approved replacement component will void the warranty and may present o
serious safety hazard. Only use the control provided with or specific by these
instructions to control the lamp. The lamp of this device will not operate
properly when connected to a standard (incandescent) dimmer or dimming
control.
Availability and performance of certain features are service-, device-, and
network-dependent and may not be available in all areas. All features,
functionality, and product specifications ore subject to change without notice
or obligation The light sources or separate control gear ore not intended for
use in other applications combined. The light source of this device is not
replaceable. When the light source reaches its end of life, the whole
luminaire shall be replaced This Nanoleaf product is primarily intended for
decorative use, with RGBW output function that can dim.
CLEANING & MAINTENANCE Do not clean the device with liquid or sprays when it is connected to power Clean with a soft dry cloth, and do not use harsh cleaning agents. Manage In accordance with disposal laws in your area.
Wi-Fi/RF This equipment has been tested and found to comply with the hm,ts of a Class B digital device, pursuant to port 15 of the FCC Rules and the Canadian ICES-003 Class B specifications. These hmits are designed to provide reasonable protection against harmful interference in o residential installation. This equipment generates. uses and con radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
WARRANTY INFORMATION Nanoleaf® warrants that this device’s hardware
components will be free from defects In material and workmanship for o period
of two (2) years from the date of purchase, unless o different period is
stated in or on the packaging of the product, based on up to 3 hours overage
working time per day/7 days per week, when used as directed (the “warranty
Period”) This limited warranty only oppress to the hardware components
contained in the original packaging. This limited warranty does not apply to
any software, even if packaged or sold with the hardware components. Nanoleaf®
does not warrant that use of this device will be uninterrupted or error-free.
If this device does not conform to this limited warranty, Nanoleaf®will send
you, at its election, a replacement device or refund your original price upon
receipt of the returned device, register receipt and proof of purchase. Please
reach out to our customer support to
find out how to return the device. This limited warranty does not cover
devices subject to occident, neglect, abuse, misuse or acts of God.
REPLACEMENT OR REFUND IS YOUR SOLE REMEDY EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS
HEREBY EXPRESSELY EXCLUDED. Some states and provinces do not allow exclusion
of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This limited warranty gives you specific legal rights,
and you may also hove other rights which vary from state to state and province
to province. For full details visit https://nonoleof.me/warronty. CUSTOMER
CUSTOMER SUPPORT
Models : NL69K1140. NL69K1150, Nl69El140
Rating Input : 100-240V AC 60Hz
Rated Power : 24W
PSU MaJI Power : 24W
Color Temperature : RGB
FCC ID: 2AEWY-NL69
IC :2AEWY-NL69
@nanoleaf
@nanoleafofficial
/thenanoleaf
Learn more at
nanoleaf.me
PAIRING CODE: SAVE FOR FUTURE USE
|
ios
|
S23251d0498
Android
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>