Maxxima MEW-CPE0342-06 3/4 Inch Conduit Pull Elbow Installation Guide
- June 14, 2024
- Maxxima
Table of Contents
Maxxima MEW-CPE0342-06 3/4 Inch Conduit Pull Elbow
Product Information
Specifications
- Model: MEW-CPE0342-06
- Manufacturer: Maxxima
- Quantity per Pack: 6
- Pack Size: 10
- Case Pack Quantity: Yes
- UL Listed: 1.25
- Width: 1.6 inches
- Height: 3 inches
- Length: 3.1 inches
- Weight: 3.1 oz
- Warranty: 1 Year
Additional Information
The 3/4 in. Conduit Pull Elbow is designed for wire installation in rigid
EMT or RMC fittings. It features a 90-degree bend and is threaded for easy
installation. This product is sold in a pack of 6.
Product Usage Instructions
-
Step 1: Preparation
Gather all the necessary tools and materials for the installation, including the 3/4 in. Conduit Pull Elbow, conduit,wires, and appropriate connectors. -
Step 2: Measure and Mark
Determine the desired location for the conduit pull elbow and mark the conduit accordingly. -
Step 3: Cut the Conduit
Using a conduit cutter or saw, carefully cut the conduit at the marked location. Ensure that the cut is clean and straight. -
Step 4: Thread the Conduit
Thread the conduit into the threaded end of the 3/4 in. Conduit Pull Elbow. Make sure it is securely tightened. -
Step 5: Connect Wires
Insert the wires into the conduit and secure them with appropriate connectors. Ensure that the connections are tight and secure. -
Step 6: Installation
Attach the 3/4 in. Conduit Pull Elbow to the desired location by connecting it to the existing conduit or junction box. Use appropriate connectors and ensure a secure fit. -
Step 7: Testing
Once the installation is complete, test the wiring to ensure proper functionality.
Frequently Asked Questions (FAQ)
Can this conduit pull elbow be used with both rigid EMT and RMC fittings?
Yes, this product is designed to work with both rigid EMT and RMC fittings.
How many conduits pull elbows are included in a pack?
Each pack contains 6 conduit pull elbows.
Is this product UL listed?
Yes, this product is UL listed.
3/4 in. Conduit Pull Elbow, Rigid EMT or RMC Fitting for Wire Installation, 90-degree Bend, Threaded (6 Pack)
MODEL : MEW-CPE0342-06
PRODUCT SPECIFICATIONS
MODEL : MEW-CPE0342-06
- MANUFACTURER : Maxxima
- QTY PACK SIZE : 6-Pack
- CASE PACK QTY : 10
- UL LISTED : Yes
- WIDTH : 1.25″
- HEIGHT : 1.6″
- LENGTH : 3″
- WEIGHT : 3.1 oz
- WARRANTY : 1 Year
ADDITIONAL INFORMATION
- Made with corrosion-resistant zinc die cast
- UL Listed
- Designed to facilitate pulling conductors through a 90° bend in a run of EMT to EMT
- Make your project NEC-compliant