KEF KSK92 Subwoofer Stacking Kit Installation Guide
- June 1, 2024
- KEF
Table of Contents
KEF KSK92 Subwoofer Stacking Kit
Product Information
Specifications
- Net weight per kit: 0.41kg (0.9lbs)
- Dimensions:
- Width: 310mm (12.2in.)
- Depth: 262mm (10.3in.)
- Height: 360mm (14.2in.)
- Package Weight: 15mm (0.6in.)
- Package Width: 10mm (0.4in.)
- Package Height: 330mm (13in.)
- Shipping Weight: 330 mm (13in.)
- Shipping Width: 684.5mm (26.9in.)
- Shipping Height: 1016.5mm (40 in.)
- Shipping Depth: 330 mm (13in.)
Product Usage Instructions
Installation Instructions
- Unbox the KSK92 Subwoofer Stacking Kit and ensure all components are present.
- Choose the desired location for stacking the subwoofers and place the bottom layer of KC92 in that location.
- Follow the specific installation instructions based on the number of KC92 units being stacked:
- For stacking 2 x KC92 units:
- Proceed with the installation steps outlined for this configuration.
- For stacking 3 x KC92 units:
- Proceed with the installation steps outlined for this configuration.
- Ensure that once stacked, the subwoofers are not moved to maintain stability and performance.
FAQ
-
Q: Can I stack more than 3 KC92 units using the KSK92 SubwooferStacking Kit?
A: The KSK92 Subwoofer Stacking Kit is designed for stacking up to 3 KC92 units. Exceeding this limit may compromise stability and performance. -
Q: Are additional components required for stacking the subwoofers?
A: No, the KSK92 Subwoofer Stacking Kit includes all the necessary components for stacking the subwoofers securely. -
Q: Can the stacked subwoofers be easily disassembled if needed?
A: While the stacking kit provides a stable configuration, it is recommended to disassemble carefully following the reverse of the installation steps if required.
Introduction
Thank you for choosing KEF KSK92 Subwoofer Stacking Kit. Please read and follow this user manual carefully before using the KSK92 Subwoofer Stacking Kit.
In the box
Installation Instructions
Important: Place the bottom layer of KC92 in the desired location before
stacking.
The subwoofers should not be moved afterwards
Important : Place the bottom layer of KC92 in the desired location before
stacking.
The subwoofers should not be moved afterward.
Specifications
Net weight per kit: 0.41kg (0.9lbs)
DIMENSION
Paper Collection
- PAP 20 / PAP 21 /PAP 21
- Carton Printing materials
Environmental labeling of packaging
KEF reserves the right, in line with continuous research and development, to amend or change specifications without prior notice. E&OE.
GP Acoustics (UK) Limited
Eccleston Road Tovil, MaidstoneKent, ME15 6QP UK