hama 00176656 Smart Outdoor Plug with Power Meter Instruction Manual

hama 00176656 Smart Outdoor Plug with Power Meter

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these operating instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Correct use
The smart socket is suitable for convenient control via the app, voice commands and automation. The device is only suitable for indoor use. Any other use is considered incorrect. Unauthorized modifications or conversions are not permitted and will invalidate the warranty. Do not open your device yourself under any circumstances and do not attempt to carry out any repairs yourself.

Packaging contents

Explanation of warning symbols and notes

Risk of electric shock

• This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning

• This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

• This symbol is used to indicate additional information or important notes.

Packaging contents

• 1x smart plug
• 1x quick guide
• 1x warning and safety instructions

Safety instructions

Warning – Max. 2300 W
Do not operate the product outside the power limits given in the specifications.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not use the product if the AC adapter, adapter cable or power cable is damaged.
• Do not operate while covered.
• Voltage-free only when the plug is disconnected.
• Only operate with closed safety covers.
• Protect the product from dirt, moisture, and overheating, and use it in dry environments only.
• This product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• Do not use the product near heaters, other heat sources, or in direct sunlight.
• Only use the article under moderate climatic conditions.
• Do not use the product in areas in which electronic products are not permitted.
• Do not use the product in a damp environment and avoid splashing water.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately under the locally applicable regulations.
• Never connect multiple units of this product in a series.
• Do not use any heat-generating devices (such as electric blankets, coffee machines, etc.) with this product. There is a risk of fire and injury.
• Do not use this product with any devices that are motorized or devices that have a rotating component or tool. There is a risk of injury.

Setup

The following steps are required to commission the device:

• Connect the device to a properly installed and easily accessible mains socket.
• Put the device in pairing mode by holding the button for around 5 seconds. The LED starts to flash quickly.

Installing the Hama Smart Home app
To use all the functions of the device, you need a smartphone/tablet and the Hama Smart Home app.

Note

• The following operating systems are supported:
• iOS 16.3 or later
• Android 6.0 or later
• Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to your smartphone/tablet.
• To install the app, follow the instructions on your smartphone/tablet.
• Open the app on your smartphone/tablet.

Note

• While setting up the app, you will be asked whether the app has permission to access the functions of your smartphone/tablet. Say yes to these prompts for the full functionality of the device.
• Register to create a new account. Alternatively, log in with the access data of your existing account.
• Follow the instructions for setting up the app until you can add a new device, see Chapter 4.2

Integration into the Hama Smart Home app.

NOTE

• A detailed description of the Hama Smart Home app and all of its functions can be found in our app guide at: www.hama.com article number Downloads  ****App operating instructions

Note
Ensure that you are using the latest version of the Hama Smart Home app.

Integration into the Hama Smart Home app
After successful installation of the device and app, now integrate the device into the app.

• Start the Hama Smart Home app on your smartphone/tablet.
• Tap the [Add device] button. Or the plus sign (top right).
• Tap the Scan QR code (top right) button.
• Scan the QR code on your item:

if the QR code was recognised, setup of your item begins. You will need to confirm the network data of your 2.4 GHz network to do this. The setup process can take up to 3 minutes. Once setup is complete, you can then customise the names of the items or end setup.

Connecting via a third-party app
Thanks to the Matter wireless standard, you can control our item in all compatible third-party apps in addition to our app. Please note, however, that the full range of functions is only available to you when using the Hama Smart Home app.

Share after initial integration in Hama Smart Home App:
If you have already set up the item in the Hama Smart Home app, but want to share it for control in the app of a third-party provider, this is possible via the following steps: Open the item and navigate to the item settings using the “…” symbol.

Then generate a customised QR code and numerical code via the point (share via Matter).

Now follow the steps in your chosen Matter-enabled app to set up the item using the generated number or QR code.

Initial connection via a third-party app
You can also use our items without first connecting them to the Hama Smart Home app. Please follow the steps below:

• Open the Matter-compatible app you have selected and start device connection.
• Press and hold the button on the socket for approx. 5 seconds until the LED starts to flash.
• Scan the QR code on the side of the socket with the corresponding app.

Note

• Please ensure that the app you have selected supports the Matter standard.
• Find out about further requirements set out by the provider and follow these as necessary.

Setting options in the Hama Smart Home app

The following settings can be made in the app:

1. Current consumption
2. Run time
3. Schedule
4. Countdown
5. Function settings: (Switching sequence, child lock, LED mode, etc.)
6. Switching on/off

Scenes can be created in the app for extended usage options. (See chapter 6 and App Guide)

Extended usage options with scenarios

Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the SmartHome products in your home. Programming is always via the app (see Section 4 of the App Guide) and will be offered/suggested to you on an individual basis.

Standard usage option

Technical data

• Input voltage 220 – 240 V ~, 50 Hz
• Maximum connected power 10 A, 2300 W
• Frequency band 2.4 GHz
• Max. radio-frequency power transmitted < 100 mW

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use. Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.

Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the use instructions and/or safety notes.

Service and support

Please contact Hama Product Consulting if you have any questions about this product.

• Hotline: +49 9091 502-0 (German/English)
• Further support information can be found here : www.hama.com

To limit exposure to electromagnetic fields
This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby. This device must not be worn or carried on the body.

Hama GmbH & Co KG
86652 Monheim / Germany

Service & Support

• www.hama.com
• +49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co. KG is under license. Other trademarks and trade names are those of their respective owners. All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com
• Startseite hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>