NewRixing NR-8803W Wireless Speaker and Karaoke Microphone User Manual

NewRixing NR-8803W Wireless Speaker and Karaoke Microphone

Product Usage Instructions

• Warnings and Guidelines:
  • Ensure compliance with FCC Rules and regulations. Failure to follow instructions may result in harmful interference.
• Installation:
  • Reorient or relocate the receiving antenna for optimal signal reception.
  • Increase the separation between the equipment and receiver to minimize interference.
  • Connect the equipment to a power outlet on a different circuit than the receiver.
• Troubleshooting:
  • If experiencing issues, consult the dealer or an experienced radio/TV technician for assistance.
• RF Exposure:
  • The device is evaluated for general RF exposure requirements and can be used in portable conditions without restrictions.

FAQs

• Q: What should I do if my device is causing interference?
  • A: Reorient the receiving antenna, increase separation from other equipment, and consult a professional if needed.
• Q: Can I use the device in any RF exposure condition?
  • A: The device is evaluated for portable exposure conditions without restrictions.

Dear customer: Thank you for choosing our product. please read all the instructions carefully and retain the manual for future use.

Presentation of the product

1. Short press: Volume decrease
   • Long press: Previous track
2. Short press: Pause / Play
3. Short press: Wireless / USB / AUX
   • TF Card mode switch
4. Short press: Bass / Vocal sound effect / Normal sound effect
   • Long press: Turn on/off colorful light
5. Short press: Colorful light flashing mode switching
   • Long press: Turn on/off colorful light
6. Short press: Volume increase
   • Long press: Next track
7. Type-C charging port
8. LED indicator
9. TF card slot
10. USB flash drive slot
11. AUX input

Speaker and microphone charging

• Wireless speakers and microphones have built-in rechargeable lithium batteries.
• When the battery runs out, the speaker and microphone will automatically turn off.
• Please charge your speakers and microphones promptly.

Charging method:

• Plug the Type-C end of the charging cable into the charging port of the speaker or microphone, and plug the other side into the charger slot or the USB port of the computer/other USB charging device used on the USB charging device.
• When charging successfully, the indicator light under the charging port will shine a red LED, and the red LED light will turn off when the speaker is fully charged.

Important reminder

• Do not disassemble, repair, or modify the speaker without authorization.
• The speaker contains a built-in lithium-ion battery, please do not discard the battery or put the speaker in the fire.
• Do not expose the speaker to rain or a humid environment to prevent the speaker from being damaged.
• Do not expose the speaker to exposure to the sun or high-temperature environment to prevent the speaker from being damaged.
• Do not charge the device repeatedly for a long time to avoid accelerated aging of the built-in lithium-ion battery.

Instructions for wireless microphone

• Long press the key to turn on the power of the speaker. Short press the – or + key to adjust a comfortable volume.
• Long press the key to turn on the microphone, then it will connect to the speaker automatically.
• When the microphone pairing is complete, the indicator LED will shine a blue light.

Karaoke mode: Pure singing in your way

• Turn on the speaker and microphone to ensure that both are paired successfully.
• Open the music APP and select your favorite song.
• Short press the EFF button on the microphone to turn on the pure singing function: Singing mode.
• Short press the EFF button on the microphone twice to turn off the pure singing function: background music mode
• To save power, please remember to turn off BT speakers and microphones when you are not using them.

Magic voice on the microphone

• Turn on the speaker and microphone to ensure that both are paired successfully.
• Press the EFF button on the microphone to change voice modes: Remix effect / Echo effect / Male voice / Female voice / Children’s voice, etc.

Instructions for wireless speaker

• Long press the key to turn on the power of the speaker. Short press the — or + key to adjust a comfortable volume.
• Power on: flash blue light, connected: blue light always on. Power off: the light is turned off.
• Wireless connection would be the start-up mode when the speaker is turned on, ready for your wireless device.
• USB mode & TF card mode: the speaker will play songs automatically when inserting a USB or TF Card.
• When the speaker is not in use, please turn it off.

Wireless connection

• Turn on speaker power, and select the wireless paring name” NR-8803W” in your device (phone, tablet, etc.). then wireless connected.
• Power on: flash blue light, connected: blue light on. Power off: the light is turned off.
• The speaker will reconnect to the last paired wireless device automatically when powered on.

USB/TF Card mode

• Insert the USB or TF Card. Music will play automatically.

Aux input mode

• Use the included 3. 5mm auxiliary cable to connect the speaker to other audio source devices. Music will play. Control the playlist of previous or next songs only from audio source devices.

Tip: Please long-press the switch to turn OFF the power of the speaker

How to use

Troubleshooting

Specifications

Microphone specifications

Sound specifications

flash drive/ Micro TF card/ AUX**

Safety Instructions

• Keep the speaker away from heat sources, direct sunlight, humidity, water, and any liquids.
• Do not operate the speaker if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the speaker.
• Do not use the speaker if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the speaker with wet hands.
• Do not put objects into any of the openings.
• Keep the speaker free from dust, lint, etc.
• Do not use this speaker for anything other than its intended use.
• Keep the speaker out of reach of children.
• This appliance is not a toy.
• Batteries (battery packs or batteries installed) shall not be exposed to excessive heat places, such as sunshine, fire, or the like.

Care & Maintenance

• Read the following recommendations before using the Wireless Speaker.
• Following these you will be able to enjoy the product for many years.
• Do not expose the unit to liquid, moisture, or humidity to avoid the product’s internal circuit being affected.
• Don’t use abrasive cleaning solvents to clean the unit.
• Do not expose the unit to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery, or distort certain plastic parts.
• Don’t dispose of the unit in fire as it will result in an explosion.
• Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
• Don’t let the unit fall onto the floor. The internal circuit might get damaged.
• Don’t attempt to disassemble the unit as it may get damaged if you are not professional.

FCC

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>