truelife NannyCam R5 Baby Monitor Camera Instruction Manual
- June 22, 2024
- truelife
Table of Contents
NannyCam R5
INSTRUCTIONS
BOX CONTENTS
−1× camera (baby unit)
−1× parent unit
−2× USB-C adapters
−1× wall mounting accessory
−1× instructions
−1× safety instructions
PRODUCT DESCRIPTION
Camera (baby unit)
- Light sensor
- Infrared LEDs for night vision
- Status light
- Microphone
- ON/OFF switch
- Speaker
- Temperature sensor
- USB-C input for power cable
- Pairing button
Parent unit
- Antenna
- Brightness adjustment buttons
- Volume adjustment buttons
- ON/OFF/VOX button
- Charging indicator light
a. Blue light – charging
b. No light – fully charged - LULLABY button
a. Turns lullabies on/off - BACK button
- DIRECTION buttons
- OK/MENU button| 10) Signal indicator light
a. Red light (flashing) – waiting for pairing
b. Red light (steady) – camera connected - CALL button
a. Hold to activate two-way communication - ZOOM button
a. Press to toggle the zoom level - Microphone
- Camera volume indicator (baby unit)
- Speaker
- Battery cover
- Stand
- USB-C input for power cable
---|---
LOCATION OF UNITS
Option 1: for horizontal and solid surfaces
Option 2: on a vertical surface
a. Use the included mounting attachment.
b. In the box, you’ll find a set of screws and plugs to attach the mount onto
a solid, clean and flat surface.
c. Once the attachment is firmly in place, screw the camera onto the thread
and make sure it holds securely.
Option 3: use the TrueLife NannyCam Holder
a. Wrap and securely lock the TrueLife NannyCam Holder (sold separately) to
the selected location.
b. Then screw the camera onto the thread.
PAIRING THE CAMERA
The camera and parent unit are already paired straight from the factory and
simply need to be switched on.
If you have to pair the camera and parent unit again (or pair another camera),
follow the steps below.
- Press and hold the pairing button on the camera.
- Press the OK/MENU button on the parent unit.
- Select Camera → Add camera → confirm with OK
- If the pairing is successful, the parent unit will display „Pairing successful“ and the camera image.
ROTATING THE CAMERA
You can remotely control and rotate the camera using the parent unit. Just
wake up the parent unit by pressing any button and then use the DIRECTION
buttons to rotate the camera in any direction.
BASIC FUNCTIONS
VOX mode (Sleep mode)
You can set a power-saving VOX mode for the parent unit to extend battery
life. The parent unit will turn off the display and only wake up when the baby
unit detects a sound.
Feeding reminder
The parent unit can remind you when it‘s time to feed your baby. You can set a
specific time with a repeat option.
Connecting cameras
Here you can manage connected cameras and set the volume of two-way
communication or lullabies.
Alert tone
Here you can adjust the volume and tones of the parent unit.
RANGE
- The maximum range of the baby monitor is 300 m in an open area outside and 50 m in a building.
- The maximum range of the baby monitor and signal transmission may be affected by the environment in which you use the baby monitor, such as thick walls, reinforced concrete structures, etc.
- If the connection is lost due to the distance from the baby unit, the parent unit will indicate this on the display.
SPECIFICATIONS
Parent unit|
---|---
Display| 5″ IPS, HD (1280 x 720)
Battery life (screen on)| 8 hours (brightness level 3)
Battery life (VOX mode – audio only)| 16 hours (volume level 3)
Power input| USB-C
Energy consumption| 5 V / 1.2 A
Batteries| 3050 mAh
Dimensions| 162 x 86 x 22 mm
Weight| 0.2 kg
Camera (baby unit)|
Resolution| HD (1280 x 720)
Horizontal rotation| 330° (allows 360° viewing)
Vertical rotation| 135° (allows 165° viewing)
Automatic night vision| Yes (visibility up to 5 m)
Power input| USB-C
Energy consumption| 5V / 1.2 A
Dimensions| 71 x 71 x 116 mm
Weight| 0.19 kg
SAFETY WHEN WORKING WITH THE DEVICE
- Please read the safety instructions provided carefully.
- For proper handling of the product, download and read the latest version of the manual, which can be downloaded at: www.truelife.eu
Printing errors and changes to information reserved.
Manufacturer:
elem6 s.r.o., Braškovská 15, 16 100 Prague 6, Czech Republic
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>